Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Need help fixing a BSOD related to internet usage.

25 Nov 2013   #1
coltraz

windows 7 home 64 bit
 
 
Need help fixing a BSOD related to internet usage.

Can someone please help me fix this problem? I don't know what happened. I was connecting to the internet via a D-Link USB adapter (DWA-160) and the other night it simply stopped working and caused my PC to freeze up. Since then, I cannot get on the internet with the adapter and can only get on the internet briefly with an Ethernet cable before getting a BSOD. I get no BSOD's as long as I am not connected to the internet but as soon as I connect, the PC goes nuts.

What I've tried:

- Reinstalling my in-built network adapter several times through device manager.

- Reinstalling, uninstalling, reinstalling, etc of the stupid DLink USB adapter however the reinstall always failed even though Windows told me the drivers had been successfully installed.

- Ran many virus scans with MSE and ran many scans with MalwareBytes.

- I've updated my network adapter's driver.

- I've tried deleting the file that seemingly causes the BSOD (anodlwfx.dll, though other files seem to be at fault as well) but then I can't get on the internet at all.

- I used my windows 7 disk to do repairs.

- I tried a couple of different system restore points but can't stop the BSOD.

- I ran a memory test and check disk.

I feel like I'm going to need to reinstall Windows but I really don't want to do that... Also does anyone know what might have happened to cause this? I blame that USB adapter but I don't know why so much damage has occurred. I'm so confused. It's always been nothing but smooth sailing with this PC til now.

Attached is the .zip of the files created with the diagnostic tool and renamed to match my username as instructed...

Thank you for any help...


My System SpecsSystem Spec
.
26 Nov 2013   #2
coltraz

windows 7 home 64 bit
 
 

Anyone have any suggestions on where I can receive some friendly support for this problem?
My System SpecsSystem Spec
26 Nov 2013   #3
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Hi coltraz.

All your BSODs are pointing to ANOD Network Security Filter driver, c:\windows\system32\drivers\anodlwfx.sys
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {fffff88002eb0068, 2, 0, fffff8800419b861}

*** WARNING: Unable to verify timestamp for anodlwfx.sys

*** ERROR: Module load completed but symbols could not be loaded for anodlwfx.sys
Probably caused by : anodlwfx.sys ( anodlwfx+2861 )

Followup: MachineOwner
---------
And the driver is old.
Code:
fffff880`02d94000 fffff880`02d9d000   anodlwfx T (no symbols)           
    Loaded symbol image file: anodlwfx.sys
    Image path: anodlwfx.sys
    Image name: anodlwfx.sys
    Timestamp:        Fri Mar 06 15:40:08 2009 (49B0F680)
    CheckSum:         0000A8C3
    ImageSize:        00009000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
You need to uninstall that program that is causing this driver.

Also, the ntework driver is old, too.
Code:
fffff880`11000000 fffff880`1108d000   Rt64win7 T (no symbols)           
    Loaded symbol image file: Rt64win7.sys
    Image path: Rt64win7.sys
    Image name: Rt64win7.sys
    Timestamp:        Tue Aug 23 19:25:41 2011 (4E53B15D)
    CheckSum:         00097338
    ImageSize:        0008D000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update it from Realtek .... take the Win7 and WinServer 2008 R2 Auto Installation Program dated 2013/9/24.

I would suggest you to uninstall MagicISO, as all such programs are problematic.

Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
  1. Click on the Start button
  2. Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
  3. Select the “Startup” tab.
  4. Deselect all items other than the antivirus.
  5. Apply > OK
  6. Accept then restart.
Let us know the results.
My System SpecsSystem Spec
.

26 Nov 2013   #4
coltraz

windows 7 home 64 bit
 
 

Thanks, Arc.

I installed that very Realtek driver already so I'm surprised it never updated. Maybe I since did a system restore...I'll do it again...thanks for noticing that. I cleaned up my startup programs as well, thank you.

I never installed ANOD Network Security. It must have come with the DLink wifi USB adapter - do you think? I wonder why it didn't uninstall when I uninstalled the adapter...

I found I can go to Control Panel\Network and Internet\Network Connections and right-click Local Area Connection/Properties and select ANOD Network Security from the list and uninstall it. That's a relief. Still I wonder how it got there. I'm afraid to plug this DLink thing back in and try to use it.
My System SpecsSystem Spec
26 Nov 2013   #5
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

If you have performed a system restore to an earlier point, the driver updates will be reverted. So get the update again.

ANOD/Alpha network sometimes got installed by DLink adapters. If the program is uninstalled, delete the driver in c:\windows\system32\drivers\anodlwfx.sys.

Let us know hoe th computer is running after doing those.
My System SpecsSystem Spec
Reply

 Need help fixing a BSOD related to internet usage.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD while browsing the internet Related to AMDs atikmpag.sys
just as the title says, here are my specs: (taken from agomo) i have catalyst driver 14.9, reinstalled it after BSODs are coming related to a directX file, however the BSODs kept coming with atikmpag.sys. i personally think my graphics card is falling apart. Overview ...
BSOD Help and Support
BSOD on Internet Related Programs (tcpip.sys)
For the past 2 months I have received an increased growth in BOSD relating to tcpip.sys. I have received over 50 BOSD in on week and approximately 10 in one day. It makes my life especially frustrating because of the delay in my school online homework, server hosting, and personal entertainment. I...
BSOD Help and Support
Fixing Slow Internet Connectivity After Windows Updates
When I installed IE 10 on my Windows 7 Ultimate SP1 x64 PC, something caused all web browsers (IE, FireFox, etc.) to take a ridiculous amount of time to start-up and make the first connection to the Internet. I rolled-back the IE 10 install back to IE 9 and enjoyed normal start-up speeds for quite...
Performance & Maintenance
high cpu/ram usage not related to any visible processes
i have been having unusually high cpu and ram usage thats not connected to any processes i can see in the task manager for about 2 days. today i got a blue screen from it, files are attached. i havent done a system restore yet but i may if its suggested. i've done mbam and avast full scans with no...
BSOD Help and Support
BSOD and Freeze on Login or Mostly Internet-Related Tasks
Hi all, I've been dealing with this problem since about the end of August. At first, my computer would freeze upon logging into Windows. I would get either a black screen, or a screen full of random colour patterns, or a solid colour. At the time I had Windows Vista, but I bought Windows 7...
BSOD Help and Support
Fixing audioDg High cpu usage
Disabling Audio Effects In order to fix the high CPU usage, I disabled the audio enhancements processed by the audiodg.exe file. To disable the audio enhancements, use the following steps: Right-click the speaker icon in the lower right corner. Select Playback Devices from the menu. A list...
Sound & Audio


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 04:26.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App