Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD After New System Build, Many Different Types of BSOD Errors.

26 Nov 2013   #1
CLatta

Windows 7 Ultimate x64
 
 
BSOD After New System Build, Many Different Types of BSOD Errors.

I had been getting BSODs on an older custom PC so I decided it was time to upgrade and I recently put together a new system and have been having irregular BSOD errors since day 1. I initially thought that it was the RAM because that was the only other part besides the hard drives that was recycled from my old build but I ran memtest for 7 passes and then 10 passes and received no errors. A problem I have also been having is that my RAM will not boot to windows at it's rated speed of 1600mhz and with XMP enabled. I finally got it to boot to 1600 when I increased the timings by 2 or 3 on each but that didn't seem to solve anything. I should've clarified that I get BSOD when the RAM is set to auto or when it's set to manual or anything else in between. I am also able to run Prime95 for about 6 hours along with browsing and gaming with no issues until I BSOD eventually. I've attached the many dump files I've accumulated since I started logging them. The only consistent thing that keeps popping up is ntoskrnl.exe which I doubt to be the actual cause. Hopefully someone can help.


My System SpecsSystem Spec
.
26 Nov 2013   #2
CLatta

Windows 7 Ultimate x64
 
 

An update of sorts. It seems my adobe flash player is crashing a lot after extended periods of viewing online videos and streaming. Also in the latest crash dump file in my zip folder my computer would hang and freeze and barely respond and when I looked at the resources panel my cpu was at a constant 100% before it crashed.

Edit: Here's another dump file from another BSOD.
My System SpecsSystem Spec
26 Nov 2013   #3
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Only one of tomorrows crash dump says it:
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {11c, 2, 0, fffff88000eeb730}

*** WARNING: Unable to verify timestamp for rrwd0002.sys
*** ERROR: Module load completed but symbols could not be loaded for rrwd0002.sys
Probably caused by : 1394ohci.sys ( 1394ohci!Dispatch::DispatchIrbRequest+a8 )

Followup: MachineOwner
---------
In this case you need to follow it: How to Revert the Win7 1394ohci.sys to the Legacy Driver.

The other dumps are not showing any probable cause, so we will need to wait and observe how it goes after changing the driver to legacy. Later, depending on the situation, we will take necessary steps.
My System SpecsSystem Spec
.

26 Nov 2013   #4
CLatta

Windows 7 Ultimate x64
 
 

Okay, will do.
Okay Legecy driver enabled. Will update asap.
My System SpecsSystem Spec
27 Nov 2013   #5
CLatta

Windows 7 Ultimate x64
 
 

I thought that last one may have fixed it as I am using an external sound card via a firewire cord and pci card but I just received this latest blue screen after tabbing in and out of games and streaming them.
My System SpecsSystem Spec
27 Nov 2013   #6
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

It is a totally different issue. A stop 0xA0000001 BSOD.
Code:
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A0000001, {5, 0, 0, 0}

Probably caused by : atikmdag.sys ( atikmdag+258fe )

Followup: MachineOwner
---------
Stop 0xA0000001 BSODs are inherent in AMD/ATI display drivers/GPUs. As it is occurring, at the first place you need to try another version of the display driver. Update your ATI/AMD display driver to the latest WHQL.

You can get it from the link in our forum, Latest AMD Catalyst Video Driver for Windows 7, or you may go to AMD Graphics Driver and Software and opt for Automatically Detect and Install the appropriate driver for your card.


During installation, you may opt for advanced installation, and install the display driver only, not the Catalyst Control Center.

Let us know the results.
My System SpecsSystem Spec
27 Nov 2013   #7
CLatta

Windows 7 Ultimate x64
 
 

Wow. Thanks for the amazingly fast response. Will follow the instructions and report back.
Edit: Okay Beta driver installed and now my gpu is actually detected as a R9 200 series instead of an HD7970(which it technically still is). The only issue I may have noticed is that my clockspeeds for the card were way below default. It was something like 585/800 instead of the 1070/1600 it comes stock at. I set it back to the default speeds in MSI Afterburner though and we will see how it plays out now.
My System SpecsSystem Spec
27 Nov 2013   #8
CLatta

Windows 7 Ultimate x64
 
 

Alright had another blue screen while streaming to twitch,playing path of exile, and in a skype call. Nothing else taxing was going on I don't think.
My System SpecsSystem Spec
27 Nov 2013   #9
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Code:
fffff880`0856c168  fffff880`042d7552Unable to load image atikmpag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
 atikmpag+0x45552
fffff880`0856c170  00000009`00000048
fffff880`0856c178  00000000`00000001
fffff880`0856c180  00000000`00000000
fffff880`0856c188  fffff880`00000000
fffff880`0856c190  fffffa80`0e5efe50
fffff880`0856c198  00000000`00000000
fffff880`0856c1a0  00000000`00000000
fffff880`0856c1a8  fffff880`0f13fcb7*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
 atikmdag+0xa0cb7
We are seeing the display driver crashing even with the latest version.

Can you test the situation with a replacement GPU or even using the onboard graphics?

The stress test may not detect anything, still stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark
My System SpecsSystem Spec
27 Nov 2013   #10
CLatta

Windows 7 Ultimate x64
 
 

Yah I can pop in an old GPU for a while and see how that goes and also test onboard graphics. Won't be able to do this for a while though as I'm off to class for the day. Will respond when I can.
My System SpecsSystem Spec
Reply

 BSOD After New System Build, Many Different Types of BSOD Errors.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
New build PC everyday BSOD several errors
Hi. I built a new PC last month. Everyday I recieve 2-3 BSODs while browsing, playing games and even if idle. I have 4-5 different bccodes. Here are the specs: Windows 7 Ultimate 64bit SP1 Intel Core i5-4440 Asus H81M-K 4GB DDR3 1600MHz Toshiba 500GB 7200/32MB Fortron 450W
BSOD Help and Support
Random BSOD and Freezing, Several Types of Errors (details in post)
Hi! I would like to say thank you in advance to anyone who's taken the time to read this post. I've been getting blue screen crashes for the past month or so and it seems to be getting progressively worse. The BSODs began occurring about once every couple of days, now they seem to happen...
BSOD Help and Support
Multiple BSOD's/Errors on new build
I just built my first desktop and am getting regular BSOD's. They seem to be occurring at any point where the system would access RAM. I have, however, successfully installed Windows 7 Ultimate x64 and programs such as Chrome and itunes without issue. I have attached a collection of my minidump...
BSOD Help and Support
BSOD at random times. Different types of Errors but mainly 0x0000007E
I have just bought this computer and have constantly had multiple BSOD occurrences a short while after first use. This computer is brand new, Custom Built. While it was at Cyberpower HQ it underwent Quality control to test the hardware's compatibility with each other which it passed. I have tried...
BSOD Help and Support
BSOD with 3 different types of errors.
Hello, I am having some trouble with my custom made computer. I used to have, a year ago very often BSODs with 2~3 distinctive stop errors which at the end made 2 winXP and 1 ubuntu partitions unbootable. I checked memory and other hardware without finding a culprit. It seemed that CPU was not...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:19.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App