Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD in Windows 7 and 8.1

03 Dec 2013   #1
Roelemanski

Windows 8 64 bit
 
 
BSOD in Windows 7 and 8.1

Hi All,

I've been trying to solve this problem for days without any luck. I will go ahead and describe what has happened and what I have done so far to resolve my issue.

- Problems started after upgrading Avast Antivirus to a newer version on Windows 7 64 bit. Around the same time I was repairing my fathers desktop and had to use power from my own pc (unplugged it while it was switched off). Not sure these things are related.
- I received BSOD stating IRQ is not or equal
- Googled and first thing I did was uninstall Avast
- Next thing was to update all drivers, but the BSOD would keep getting back sometimes very quickly I was able to use desktop for hours.
- Next thing to do was a memory test using Mestest86, it run for over 9 hours without finding any errors
- I ran a GPU stress test using FurMark, no problems found.
- I upgraded to Windows 8.1 64 bit and desktop did not give any BSOD until several days later
- I tried updating several drivers in Windows 8.1, no solution
- System would now also occasionally give a message at startup 'dqs training failed on previous boot reverted to slower dram'
- I read this could be related to CMOS battery failing so I replaced this battery to no effect.
- I just rebooted from a new BSOD stating something like 'Worker Thread Returned At Bad ....something' The screen went to fast to way to be able to read.

At this point I am completely lost and do not know what to do. Hopefully you guys are able to help me based on this description and my attached DUMP files as per instruction.

I'm hoping to be able to pinpoint hardware that might be causing the problems. I don't think this is a software or driver problem given the fact that the problem resurfaces at a clean Windows 7 to 8.1 upgrade.


My System SpecsSystem Spec
.
03 Dec 2013   #2
YoYo155

Windows 10
 
 

Welcome to SF Roelemanski .
Can you elaborate on just how you tested your hardware?
How long did the stress tests run for? What were the temperatures recorded?
How many passes did MEMtest86(+?) did you allow for?

Please follow this quote detailing how to enable Driver Verifier and how it can help
uncover and driver issues.

Quote   Quote: Originally Posted by Arc View Post
Your crash dumps are not showing any finite probable cause.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

information   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.

warning   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.

Tip   Tip

Let us know the results, with the subsequent crash dumps, if any.
My System SpecsSystem Spec
03 Dec 2013   #3
Roelemanski

Windows 8 64 bit
 
 

Thanks for your quick response YoYo155!

The Memtest86 run for around 9 hours and was still running when I checked again. There were no errors found so I stopped the test at that point. I'm not sure how many passes. As for the GPU I ran FurMark for 15 minutes (default stress test) and the temperature of the GPU did not come above 72-73 degrees.

I will try Driver Verifier next and will report back after this. Thanks again!
My System SpecsSystem Spec
.

03 Dec 2013   #4
YoYo155

Windows 10
 
 

Awaiting your update .
My System SpecsSystem Spec
03 Dec 2013   #5
Roelemanski

Windows 8 64 bit
 
 

Ok, that seemed to do something!

I turned on Verifier. The version I have for Windows 8.1 does not have all the same options as in the instruction so I turned on all logging possible. After this the system rebooted several times:

1. Booted straight into BSOD after windows loading screen
2. Booted again in the same windows loading screen but this time there were articifacts on the screen!
3. Booted again same as 1
4. Booted again and system very slowly loads into Windows and as soon as I want to disable Verifoer (but didn't get that far) it runs into a different BSOD with a error code with something like 'Verifier violation'
5. Booted again into safe mode and switched off Verifier and rebooted again to regular Windows and I am now able to collect dump and post this message with hopefully an useful result in the attachment!
My System SpecsSystem Spec
03 Dec 2013   #6
YoYo155

Windows 10
 
 

Two things if I may.
One is that no dumps are present in the file you uploaded, you can manually check the minidump folder.
Code:
C:\Windows\minidump
If dump files are present in that folder copy them to the Desktop, zip and upload in your next post.



Two is that enabling all of the options is not the correct way of using DV.
Please enable driver verifier following this TUTORIAL | But using the settings listed below:
Quote:

  1. Go to Start and type in "verifier" (without the quotes) and press Enter
  2. Select "Create custom settings (for code developers)" and click "Next"
  3. Select "Select individual settings from a full list" and click "Next"
  4. Select everything EXCEPT FOR "Low Resource Simulation", "Force Pending I/O Requests", "IRP Logging" and click "Next"
  5. Select "Select driver names from a list" and click "Next"
  6. Then select all drivers NOT provided by Microsoft, Unknown, or Macrovision and click "Next"
  7. Select "Finish" on the next page.
My System SpecsSystem Spec
03 Dec 2013   #7
Roelemanski

Windows 8 64 bit
 
 

Ok, I've collected 2 dumpfiles from C:\Windows\minidump and attached them.

I will now go ahead an start Verifier with the settings you described, YoYo155.

Thanks.
My System SpecsSystem Spec
03 Dec 2013   #8
Roelemanski

Windows 8 64 bit
 
 

Just a quick response...

You describe "Low Resource Simulation". I have 2 options:

- Systematic Low Resource Simulation
- Randomized Low Resource Simulation

I will now DESELECT both and continue. Is this correct?
My System SpecsSystem Spec
03 Dec 2013   #9
YoYo155

Windows 10
 
 

Correct .
My System SpecsSystem Spec
03 Dec 2013   #10
YoYo155

Windows 10
 
 

Update, literally.
Since you're on Windows 8 I had to update my SDK, and it gave me a much more detailed report this
time around and there appears to a timeout issue with your USB wireless adapter. Try and use the system
without it and asses the situation.
My System SpecsSystem Spec
Reply

 BSOD in Windows 7 and 8.1




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD on Windows Update; BSOD when playing games
NOTE: DM log collector seem to be getting stuck when collecting msinfo32.nfo, so the attached file can be incomplete. Please let me know if it can take longer than 10 minutes to collect this data so i will run the program again. BSOD #1: It started at around January 15th - basically when i shoot...
BSOD Help and Support
BSOD - Windows 7 Ultimate 64bits TO MANY Different BSOD
Hi All, Iíve come across a series of BSODs and i don't know how to solve this because it's always different erros! PLS help My system: OS: Windows 7 Ultimate 64 bits Motherboard: Gigabyte- GA-EX58-EXTREME GPU: Radeon HD 6970 - GV-R697OC-2GD CPU: i7 920 Memory: CORSAIR XMS3 4096MB DDR3...
BSOD Help and Support
BSOD using FULL windows 7, no BSOD using safe mode
My computer has been stable for years, however recently I have been getting BSOD when doing any task. Windows will sometimes load to the desktop and I am able to watch video, run windows score, check email, etc before it will BSOD. Other times, it will BSOD before getting to the windows login...
BSOD Help and Support
BSOD trying to start Windows, gets to desktop then BSOD, then reboots
Hi guys, I encountered BSOD for the first time. Very annoying. Right now I have to run this on Safe Mode in order to access the internet. I also noticed I can't use Firefox right now, and instead am using iE. I couldn't run the the performance scan report either (time out?), but I did attach the...
BSOD Help and Support
lots of BSOD - Format, Clean windows install - Still same BSOD
Hi, I use a 1.5 year old aces aspire 5738z and I think it just died on me. Here is what happens. Whatever I do it cannot stay without a BSOD for more than 10 minutes. I tried reinstalling drivers and it did not change anything so I tried several things but finally just formated it and installed...
BSOD Help and Support
BSOD Starting Windows Virtual PC Machines (any machine, always bsod)
Hello All, I've been getting consistent BSODs while trying to start Windows Virtual PC (not Microsoft Virtual PC 2007) machines on my computer. I've tried various driver updates and a bios update and several system restores along the way, but to no avail. In the attached dump files, the last...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 03:46.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App