Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD on new W7 Pro x64 system with QBPro2011, Office Small Biz 2007,

05 Dec 2013   #1
jrd53047

W 7 Pro -x64
 
 
BSOD on new W7 Pro x64 system with QBPro2011, Office Small Biz 2007,

I'm getting BSOD's on a new PowerSpec B331 running Windows 7 Pro - 64 bit, 4gb mem, 1TB hard drive. It is part of a Workgroup. This is the second PowerSpec B331 that gets the BSOD's. When the BSOD's started on the first PowerSpec after installing QB Pro 2011, Dell 2335dn, Trend Micro, and Office, I took it back to Micro Center and they gave me a replacement unit no questions asked. The replacement unit got the same BSOD errors.

The system has the following applications installed:
  1. QuickBooks Pro 2011;
  2. Dell 2335dn MFS application suite;
  3. Office Small Business 2007;
  4. Trend Micro Titanium Internet Security2014;
  5. Adobe Reader X (10.18);
  6. Adobe Flash Player 10 ActiveX;
  7. Malwarebytes Pro Trial;
  8. TeamViewer 8.
All of the applications except Trend Micro Titanium are running with no issues on an old slow XP Pro desktop that I'm replacing.

QuickBooks is single user but its company files can also be opened by a single desktop in a domain on the network.

It is connected via a KVM to monitor, keyboard, and mouse.

The event viewer shows that system resources get exhausted and services start dying. It usually required a hard power off / on to recover and allow login.

Today no one was using the desktop and it had multiple Bugchecks throughout the day.

I was suspecting an issue with the Dell 2335dn MFS application suite and on 27-Nov-2013 removed their latest Nov 2013 version and installed an older version of it. The system ran until 02-Dec-2013 with no issues and then started with resource exhaustion again and eventually getting BSODs.

I have run the SF Diagnostic Tool and have attached the zip file.

Code:
There have been Bugchecks on:
 
  1. 12/2/2013 10:33:45 PM:
    • Log Name: System Source: Microsoft-Windows-WER-SystemErrorReporting Date: 12/2/2013 10:33:45 PM Event ID: 1001 Task Category: None Level: Error Keywords: Classic User: N/A Computer: Accounting-PC Description: The computer has rebooted from a bugcheck. The bugcheck was: 0x000000d1 (0x0000000000000048, 0x0000000000000002, 0x0000000000000001, 0xfffff8800615d63e). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 120213-16239-01. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" /> <EventID Qualifiers="16384">1001</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2013-12-03T06:33:45.000000000Z" /> <EventRecordID>15292</EventRecordID> <Correlation /> <Execution ProcessID="0" ThreadID="0" /> <Channel>System</Channel> <Computer>Accounting-PC</Computer> <Security /> </System> <EventData> <Data Name="param1">0x000000d1 (0x0000000000000048, 0x0000000000000002, 0x0000000000000001, 0xfffff8800615d63e)</Data> <Data Name="param2">C:\Windows\MEMORY.DMP</Data> <Data Name="param3">120213-16239-01</Data> </EventData> </Event>
  2. 12/3/2013 4:31:46 PM:
    • Log Name: System Source: Microsoft-Windows-WER-SystemErrorReporting Date: 12/3/2013 4:31:46 PM Event ID: 1001 Task Category: None Level: Error Keywords: Classic User: N/A Computer: ACCOUNTING-PC Description: The computer has rebooted from a bugcheck. The bugcheck was: 0x0000003b (0x00000000c0000044, 0xfffff80002eb67fc, 0xfffff88002ba4250, 0x0000000000000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 120313-14773-01. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" /> <EventID Qualifiers="16384">1001</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2013-12-04T00:31:46.000000000Z" /> <EventRecordID>15660</EventRecordID> <Correlation /> <Execution ProcessID="0" ThreadID="0" /> <Channel>System</Channel> <Computer>ACCOUNTING-PC</Computer> <Security /> </System> <EventData> <Data Name="param1">0x0000003b (0x00000000c0000044, 0xfffff80002eb67fc, 0xfffff88002ba4250, 0x0000000000000000)</Data> <Data Name="param2">C:\Windows\MEMORY.DMP</Data> <Data Name="param3">120313-14773-01</Data> </EventData> </Event>
  3. 12/4/2013 10:05:24 AM:
    • Log Name: System Source: Microsoft-Windows-WER-SystemErrorReporting Date: 12/4/2013 10:05:24 AM Event ID: 1001 Task Category: None Level: Error Keywords: Classic User: N/A Computer: ACCOUNTING-PC Description: The computer has rebooted from a bugcheck. The bugcheck was: 0x000000d1 (0x0000000000000048, 0x0000000000000002, 0x0000000000000001, 0xfffff88005f4b63e). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 120413-13821-01. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" /> <EventID Qualifiers="16384">1001</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2013-12-04T18:05:24.000000000Z" /> <EventRecordID>15804</EventRecordID> <Correlation /> <Execution ProcessID="0" ThreadID="0" /> <Channel>System</Channel> <Computer>ACCOUNTING-PC</Computer> <Security /> </System> <EventData> <Data Name="param1">0x000000d1 (0x0000000000000048, 0x0000000000000002, 0x0000000000000001, 0xfffff88005f4b63e)</Data> <Data Name="param2">C:\Windows\MEMORY.DMP</Data> <Data Name="param3">120413-13821-01</Data> </EventData> </Event>
  4. 12/4/2013 8:34:22 PM:
    • Log Name: System Source: Microsoft-Windows-WER-SystemErrorReporting Date: 12/4/2013 8:34:22 PM Event ID: 1001 Task Category: None Level: Error Keywords: Classic User: N/A Computer: ACCOUNTING-PC Description: The computer has rebooted from a bugcheck. The bugcheck was: 0x000000d1 (0x0000000000000048, 0x0000000000000002, 0x0000000000000001, 0xfffff8800685f63e). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 120413-14258-01. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" /> <EventID Qualifiers="16384">1001</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2013-12-05T04:34:22.000000000Z" /> <EventRecordID>16097</EventRecordID> <Correlation /> <Execution ProcessID="0" ThreadID="0" /> <Channel>System</Channel> <Computer>ACCOUNTING-PC</Computer> <Security /> </System> <EventData> <Data Name="param1">0x000000d1 (0x0000000000000048, 0x0000000000000002, 0x0000000000000001, 0xfffff8800685f63e)</Data> <Data Name="param2">C:\Windows\MEMORY.DMP</Data> <Data Name="param3">120413-14258-01</Data> </EventData> </Event>



My System SpecsSystem Spec
.
05 Dec 2013   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Hi jrd53047,

Apparently your issue is with ASMedia USB3 drivers.
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {48, 2, 1, fffff8800685f63e}

*** WARNING: Unable to verify timestamp for asmthub3.sys
*** ERROR: Module load completed but symbols could not be loaded for asmthub3.sys
Probably caused by : asmthub3.sys ( asmthub3+963e )

Followup: MachineOwner
---------
Update the USB3 controllers from Station-Drivers - Asmedia drivers & firmwares.

Let us know the results.
My System SpecsSystem Spec
05 Dec 2013   #3
jrd53047

W 7 Pro -x64
 
 
ASMedia Drivers Downloaded & Installed

Hello,

Thanks, I downloaded and installed the recommended drivers then rebooted the system.

I will monitor the PC and provide feedback.

Since the longest the PC went without an issue was almost 5 days, the system should run for at least 15 days without issue before it can be considered resolved.
My System SpecsSystem Spec
.

05 Dec 2013   #4
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

OK, take your time. If there is any BSOD in between, let us know as per the posting instructions.
My System SpecsSystem Spec
10 Dec 2013   #5
jrd53047

W 7 Pro -x64
 
 
BSOD(s) continue

The BSOD(s) have started occurring again.

Today they happened right after I attempted to connect remotely using teamviewer. Tried twice and it happened the same way each time.

The latest zip file is attached.
My System SpecsSystem Spec
11 Dec 2013   #6
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Before the teamviewer operation, there was another BSOD after I checked last time, on 07/12. What is strange there that the Asmedia USB3 driver filed again, despite of the driver update.
Code:
BugCheck C2, {7, 109b, 40f0010, fffffa800831b780}

*** WARNING: Unable to verify timestamp for asmthub3.sys
*** ERROR: Module load completed but symbols could not be loaded for asmthub3.sys
*** WARNING: Unable to verify timestamp for asmtxhci.sys
*** ERROR: Module load completed but symbols could not be loaded for asmtxhci.sys
GetPointerFromAddress: unable to read from fffff80003113100
GetUlongFromAddress: unable to read from fffff800031131c0
Probably caused by : asmthub3.sys ( asmthub3+3288 )
--------------------------------------------------------------------------------------
    Image name: asmthub3.sys
    Timestamp:        Sat Aug 17 00:58:54 2013 (520E7D76)
And, the latest crash dump, during TeamViewer session, caused due to insufficient system resources.
Code:
BugCheck 3B, {c0000044, fffff80002f0a7fc, fffff88009450250, 0}

Probably caused by : win32k.sys ( win32k!zzzChangeStates+7d2 )

Followup: MachineOwner
---------
The first parameter means ....
Code:
EXCEPTION_CODE: (NTSTATUS) 0xc0000044 - Insufficient quota exists to complete the operation
So it may be either memory or network, apparently.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.
If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Which network connection you actually use, the wireless one, or the wired one?
Apparently it appears that the Atheros device is disabled.
Code:
Qualcomm Atheros AR5BWB222 Wireless Network Adapter:    This device is disabled.
So you are using the wired network I think? The driver is really old.
Code:
fffff880`04652000 fffff880`046bc000   Rt64win7   (deferred)             
    Image path: \SystemRoot\system32\DRIVERS\Rt64win7.sys
    Image name: Rt64win7.sys
    Timestamp:        Wed Feb 16 14:33:57 2011 (4D5B92FD)
    CheckSum:         000754A7
    ImageSize:        0006A000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update it from Realtek. Get the Win7 and WinServer 2008 R2 Auto Installation Program dated 2013/11/26.

Out of curiosity, I am asking two more things ... may not be very essential. But as it is a branded desktop, these are better to know ..
Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator
Also let us know the wattage of the PSU.

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .

Let us know the results.
My System SpecsSystem Spec
11 Dec 2013   #7
jrd53047

W 7 Pro -x64
 
 
BSOD - response to last request for information

Remember, this is the second PowerSpec B331 that is exhibiting the exact same symptoms as the first one that MicroCenter swapped out when I took it into them for diagnosis. I had run memtest86 on it with no errors.

1) PSU is 250 watt: Power calculator says minimum of 198 watts and it recommends a 248 watt psu;
2) PC does not run hot at all;
3) The wireless adapter has been purposely deactivated as they do not want any of their PC's connecting to wireless networks;
4) Installed new Realtek Ethernet drivers;
5) Speccy snapshot published at http://speccy.piriform.com/results/K...AZjMtliVWdN2Ti
6) memtest86 is running.


A couple of other items, that I should have included in the last post.
1) As I mentioned before it is connected via a KVM switch:
a) When I checked the system, the LCD screen was jumpy and wavy, no icons, but the mouse pointer moved around the entire screen;
b) The accountant mentioned that when she saw it happen previously, the mouse would only move up and down vertically in the middle of the screen;
2) For the most part, this PC is simply sitting there running with no one directly logged in except on Tuesday and Thursday mornings when the accountant is in;
3) As I mentioned in my original post, the QuickBooks company files are accessed by one other user from his PC on the LAN;
4) The problem was noted yesterday when he could not access the company file on the B331:
a) He checked the B331 saw the BSOD message and power cycled the B331:
b) On reboot, I connected remotely via TeamViewer and after a few minutes the B331 hung and he power cycled it again.

I picked up the B331 from their office and ran it from 8pm last evening to 10am this morning with no issues.

I just remembered that during the 5 day period the B331 ran with no issues after I replaced the first one, we had hooked it up to a spare standalone monitor and keyboard. The KVM was completely out of the picture.
My System SpecsSystem Spec
11 Dec 2013   #8
jrd53047

W 7 Pro -x64
 
 
Additional info

Forgot to mention that the KVM uses a USB connector.
My System SpecsSystem Spec
11 Dec 2013   #9
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

250 watts are not any PSU to have. How minimum the usage may be. Get one at least of 450 watts, depending on your operations.
My System SpecsSystem Spec
12 Dec 2013   #10
jrd53047

W 7 Pro -x64
 
 
Ref: Power supply recommendation

The PowerSpec B331's that are exhibiting the problem are 5 weeks old and under warranty. This MicroCenter already exchanged the first one and the second B331 has the same issue. I've got almost 20 other B331's installed with no issues. Changing out the power supply would void the warranty.

By the way Memtest86 ran 12 passes with no issues.

I'm taking a spare monitor, keyboard, and mouse along with the B331 back to the accountants office in the morning. I'm going to install the B331 using those instead of the KVM switch.

I didn't mention this earlier but the B331 is a replacement system for a nine year old Dell XP desktop with 512mb of mem that was going to need a hard drive replaced.
My System SpecsSystem Spec
Reply

 BSOD on new W7 Pro x64 system with QBPro2011, Office Small Biz 2007,




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Cannot get MS Office 2007 autoupdates after setting up new system, #2
I'm stealing the title of an existing thread because the opening post is identical to my situation, except I'm working with 32-bit Windows 7 Pro on an Acer Travelmate 3004 notebook. Unfortunately, I'm still stuck, whereas that poster got lucky. Per the Windows Update Posting Instructions I'm...
Windows Updates & Activation
Cannot get MS Office 2007 autoupdates after setting up new system.
I just helped a friend set up his new HP Pavilion 500T computer that is running Windows 7 Pro SP1 64 bit. After initial setup and before installing any software, I ran Windows Update and it downloaded and installed about 70 updates with no problems. I then installed Outlook 2007 (first) and MS...
Windows Updates & Activation
Compatibility pack for 2007 office system
I am not using 2007 office system. I use Microsoft works and WordPad. Can I safely remove the Compatibility Pack(and free all 173 MB HD space it occupies)? Also, what is Microsoft Office Power Point Viewer? Am I using it?
Microsoft Office
Can Office 2003 and Office 2007 co-exist on a Win7 system?
Can I (in addition) to an already installed Office 2003 install the Office 2007 version as well? Or do they interfere each other? Peter
Microsoft Office
2010 Office Professional Plus to Replace 2007 Office Small Business
Good Evening Everyone, I have a few questions concerning the Installation of 2010 Office. I know that I have to uninstall Office 2007. I have no clue on how to save or where to save my documents from Office 2007. The documents consist of Word, Excel, Powerpoint and a few various folders. ...
Microsoft Office
More than one installation for Office 2007 Small Biz
I have an authentic copy of Office Small Business 2007 but I use two computers. Am I allowed to install the same license on 2 computers? Will it detect an existing installation (PC #1) when I install it on PC #2? Thx
Microsoft Office


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:25.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App