Random BSOD. Gaming/Updating/browsing/sitting/Restarting


  1. Posts : 1
    Windows 7 professional
       #1

    Random BSOD. Gaming/Updating/browsing/sitting/Restarting


    Most Recent BSOD and it's corresponding Codes. Honestly I'm just at a complete loss here. Brand new computer with brand new everything(recently built with the newest parts i could afford so not everything is brand spankin new but none is 2nd hand either.). I believe i've updated all my drivers properly but i believe this is a bit beyond my level of knowledge.

    Problem signature:
    Problem Event Name: BlueScreen
    OS Version: 6.1.7601.2.1.0.256.48
    Locale ID: 1033

    Additional information about the problem:
    BCCode: 124
    BCP1: 0000000000000000
    BCP2: FFFFFA800E63F028
    BCP3: 00000000F2001DC0
    BCP4: 0000000000070150
    OS Version: 6_1_7601
    Service Pack: 1_0
    Product: 256_1


    Also i have the zipped info that is requested for new threads.
    If anything is incorrect i will address it as quickly as possible.
    Thank you very much for your time and assistance or even just looking at this page.
      My Computer


  2. Posts : 3,056
    Windows 10
       #2

    Welcome to SF billxgates :) .

    You have a cluster of bug checks which I believe are originating from two sources,
    hardware & software, one of which is more crucial then another.

    First of all your system event log is swamped with WHEA (Windows Hardware Error Architecture)
    with an error type specifying an Internal parity error which means that your CPU is unstable.
    That is most common for running the CPU with lower Voltage than required.
    Code:
    Event[24918]:
      Log Name: System
      Source: Microsoft-Windows-WHEA-Logger
      Date: 2013-12-06T00:33:49.188
      Event ID: 19
      Task: N/A
      Level: Warning
      Opcode: Info
      Keyword: N/A
      User: S-1-5-19
      User Name: NT AUTHORITY\LOCAL SERVICE
      Computer: User-PC
      Description: 
    A corrected hardware error has occurred.
    
    Reported by component: Processor Core
    Error Source: Corrected Machine Check
    Error Type: Internal parity error
    Please remove any Asus Utilities afterwards,
    reset your CMOS bac to it's optimized defaults.

    Reset the BIOS back to default:

       Note
    Write down the current value of the SATA Mode!
    Its either AHCI or IDE.
    After resetting the CMOS go back and verify the value for SATA Mode is what it was
    when the OS was installed.

    If any component is overclocked reset it back to stock speeds!


    It is very tempting, when building a new system to reuse the old PSU, I am not saying
    it is not OK to do so but only after considering all of the variables.

    What is the make, model and age of your PSU?
    Fill out this form and post back the result:




    Test for thermals and stability:

    • Download HWinfo and post a Screenshot of the sensors window, one at idle and another while putting load on the PC using Prime95 for the CPU side and Furmark for the GPU.
      • Before running Prime95 make sure to enable Round-off checking (see 1st post under the tutorial).

         Note
      It is not mandatory to run both tests simultaneously, although possible as long as the temperatures are under constant monitoring



    That's the hardware part, now the software.
    I noticed that MSE and Kaspersky are stepping on each-others toes, please select one and uninstall the other.


    Post back with the results.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 13:10.
Find Us