Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD, Regular Bugcheck error

12 Dec 2013   #11
mrd156

Windows 7 Pro (64bit)
 
 

All disks passed the short test, have started the long test on just the OS ST500DM002.

Looking to run the RAM tests tonight to see if that flags anything, there is only one 4GB chip so hopefully that should get a good test overnight.


My System SpecsSystem Spec
.
13 Dec 2013   #12
mrd156

Windows 7 Pro (64bit)
 
 

Ok so the long test on the OS ST500DM002 passed with no errors. The Memtest86+ made 21 passes last night with 0 errors.

The Malwarebytes Scan flagged up the below. Wondering if something like this could cause a BSOD.

Attachment 297274
My System SpecsSystem Spec
13 Dec 2013   #13
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

OpenCandy is a potentially unwanted program for user, but I doubt that those may cause BSODs. If comes with some applications like ImgBurn.



Anyway, remove all those.

If you have followed post #5 totally, then it remains almost nothing to blame, other than a failing SATA port.
My System SpecsSystem Spec
.

13 Dec 2013   #14
mrd156

Windows 7 Pro (64bit)
 
 

The only step I was not able to complete was to Re-seat the sata and power. That being said I would have thought I would see an issue flag up issue when running tests.

The Warning "Reset to device, \Device\RaidPort0, was issued." pops up now an then.

I was wondering if I was to change the SATA mode from AHCI to IDE could that help. Being an older more compatible mode. I have never switched this on a live system so unsure if you can do this. Guess you would uninstall the driver in Windows, switch it in the BIOS and take the native driver when it boots.
My System SpecsSystem Spec
13 Dec 2013   #15
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

If you change the SATA mode, the computer will will not boot to windows anymore other than a clean reinstall.

Re-seating is needed, to make it 100% sure that everything is properly seated.
My System SpecsSystem Spec
20 Dec 2013   #16
mrd156

Windows 7 Pro (64bit)
 
 

New update.

New SATA cables, new OS drive running on its own with a fresh copy of Win7 Pro, still got a BSOD today. Am I on the right track now if I get the motherboard replaced. I am guessing this is the last thing it can be.
My System SpecsSystem Spec
20 Dec 2013   #17
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Very unhappy to know it
My System SpecsSystem Spec
27 Dec 2013   #18
mrd156

Windows 7 Pro (64bit)
 
 

No luck it seems with the new motherboard, still getting BSOD after BugCheck.

The motherboard was replaced, hdd/0, hdd/1 both replaced. No longer an SSD drive just two 500GB WD. Here is a fresh copy of the Grab All. Would you able to check and see what I am looking at this time with this BSOD.
Thanks in advance.

Attachment 299005
My System SpecsSystem Spec
28 Dec 2013   #19
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Both the BSODs are stop 0xF4, so those are storage error.
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck F4, {3, fffffa80098edb30, fffffa80098ede10, fffff8000339b0d0}

Probably caused by : csrss.exe

Followup: MachineOwner
---------
Make it sure that you performed the first part of the point 2 of post #5.
My System SpecsSystem Spec
28 Dec 2013   #20
mrd156

Windows 7 Pro (64bit)
 
 

Yes all of them steps have been followed. I have found that when a graphics card is connected to the second graphics port (pic-e x4) the bsod occor. When not connected to this port I have not had one so far.

The problem I have is this system is connected to a number of displays so needs the two. Currently have two Zotac GT610 synergy edition 1GB. One connected to the main pci-e (x16) and the second to a pic-e (x4). Have you ever heard of this causing this type of issue.
My System SpecsSystem Spec
Reply

 BSOD, Regular Bugcheck error




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Very regular BSOD. Most often error 0x000001E
Hello guys. I've been getting BSOD for a looong time now, and finally decided to seek some help! This bluescreen mostly happens when im playing games. Please do guide me if you need more informations! VERY much appreciated.
BSOD Help and Support
BSOD on start, Startup Repair: Unknown Bugcheck: Bugcheck 3d
We've been getting a BSOD on one of our computers on startup recently. The exact message the BSOD gives varies but often mentions atapi.sys. Having done extensive research we've come to the conclusion that it could be a rootkit or it could be the fact that we have Daemon Tools installed on the...
BSOD Help and Support
BSOD error: The bugcheck was: 0x0000007f
Original title: The computer has rebooted from a bugcheck. The bugcheck was: 0x0000007f (0x0000000000000008, 0x0000000080050033, 0x00000000000406f8, 0xfffff88004f7a1ed). hi all! Been getting a lot BSODīs in the past few days. All my drivers and bios are up to date. Yesterday the same BSOD...
BSOD Help and Support
Regular BSOD (multiple error codes)
Hello, NOTE: Sorry if my English fails, I'm dutch and only 13. NOTE: I'm going on holiday for some days and probably read this again on sunday. For about 4 months I receive BSOD and it's getting worse and worse. Last week i've got 3 of them a day. Error codes: 0x0000003b (2 times)...
BSOD Help and Support
BSOD, Bugcheck error
So, I have recently upgraded my computer, and the whole thing is brand new, new motherboard, cpu, memory, harddrive, and video card. Since getting my computer up and running, I keep getting BSOD's, and when I check the event logs, I get this error, Log Name: System Source:...
BSOD Help and Support
BSOD BugCheck Error 0x0000001e
Hello! - I am using Win 7 Professional 64 bits (OEM) - This computer is just 1 month old. - I have reinstall win7 once 2 weeks ago Problems 1. When i start up my system (from turning off), I will get "Kernel-Event Tracing" error with message " "Microsoft Security Essentials OOBE"...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Đ Designer Media Ltd

All times are GMT -5. The time now is 08:30.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App