Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.



Windows 7: Randomly getting BSOD

10 Dec 2013   #1

Windows 7 Profesional x64
 
 
Randomly getting BSOD

Hello,
I have problem with Blue screen, every few hours i'm getting blue screen.
I reinstalled my windows 7 but without success, blue screen is showing again. Please if you have some advice.

Code:
Problem signature:
  Problem Event Name:	BlueScreen
  OS Version:	6.1.7601.2.1.0.256.48
  Locale ID:	1033

Additional information about the problem:
  BCCode:	1a
  BCP1:	0000000000041790
  BCP2:	FFFFFA800320C5E0
  BCP3:	000000000000FFFF
  BCP4:	0000000000000000
  OS Version:	6_1_7601
  Service Pack:	1_0
  Product:	256_1

Files that help describe the problem:
  C:\Windows\Minidump\121013-16005-01.dmp
  C:\Users\mmm\AppData\Local\Temp\WER-36176-0.sysdata.xml




Attached Files
File Type: rar SF_10-12-2013.rar (195.5 KB, 2 views)
My System SpecsSystem Spec
10 Dec 2013   #2

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64Bit
 
 

Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.
Quote:
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.
*Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.
*If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
*If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot.
*If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
*If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.
information   Information
Errors are sometimes found after 8 passes.

Tip   Tip
Do this test overnight, before going to bed.
My System SpecsSystem Spec
11 Dec 2013   #3

Windows 7 Profesional x64
 
 

I did the test, 8 passes, no errors

My System SpecsSystem Spec
.


12 Dec 2013   #4

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64Bit
 
 

Any new BSOD's?
My System SpecsSystem Spec
12 Dec 2013   #5

Windows 7 Profesional x64
 
 

Yes, few hours after the test
My System SpecsSystem Spec
12 Dec 2013   #6

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64Bit
 
 

Please upload new logs.
My System SpecsSystem Spec
12 Dec 2013   #7

Windows 7 Profesional x64
 
 

New logs, today three BSOD


Attached Files
File Type: rar SF_12-12-2013.rar (285.2 KB, 2 views)
My System SpecsSystem Spec
12 Dec 2013   #8

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64Bit
 
 

Are you able to get into safe mode?
Start your computer in safe mode - Microsoft Windows Help

Any BSOD's while using the computer in safe mode?

Try that and let us know.
My System SpecsSystem Spec
12 Dec 2013   #9

Windows 7 Profesional x64
 
 

Yes, I start the pc in safe mode, how much time need the pc to work in safe mode ?
My System SpecsSystem Spec
12 Dec 2013   #10

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64Bit
 
 

2 Hours?
My System SpecsSystem Spec
Reply

 Randomly getting BSOD





Thread Tools




Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:59 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33