Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: New BSOD Errors With Video Card

11 Dec 2013   #1
Priest LLC

Windows 7 Ultimate x64
 
 
New BSOD Errors With Video Card

My video card just died in a ball of fire, so to still use my computer in connected the integrated graphics card but now I am getting these two blue screens, does anyone know how to fix it. Thank you


My System SpecsSystem Spec
.
11 Dec 2013   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

One is caused by Eset antivirus.
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {5a, 2, 0, fffff8800261233b}

*** WARNING: Unable to verify timestamp for eamonm.sys
*** ERROR: Module load completed but symbols could not be loaded for eamonm.sys
Probably caused by : eamonm.sys ( eamonm+833b )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 000000000000005a, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff8800261233b, address which referenced memory

Debugging Details:
------------------


READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800032af100
GetUlongFromAddress: unable to read from fffff800032af1c0
 000000000000005a Nonpaged pool

CURRENT_IRQL:  2

FAULTING_IP: 
eamonm+833b
fffff880`0261233b 493908          cmp     qword ptr [r8],rcx

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT

BUGCHECK_STR:  0xD1

PROCESS_NAME:  svchost.exe

TRAP_FRAME:  fffff880098722e0 -- (.trap 0xfffff880098722e0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=0000000000000000
rdx=0000000000000032 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8800261233b rsp=fffff88009872470 rbp=0000000000000001
 r8=000000000000005a  r9=0000000000000000 r10=fffff88002f63d60
r11=fffffa80069fffd0 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz na pe nc
eamonm+0x833b:
fffff880`0261233b 493908          cmp     qword ptr [r8],rcx ds:00000000`0000005a=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80003077169 to fffff80003077bc0

STACK_TEXT:  
fffff880`09872198 fffff800`03077169 : 00000000`0000000a 00000000`0000005a 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff880`098721a0 fffff800`03075de0 : 00000000`00000001 fffffa80`066f4794 fffffa80`03aa7370 fffffa80`069f0d40 : nt!KiBugCheckDispatch+0x69
fffff880`098722e0 fffff880`0261233b : 00000000`00000001 00000000`00000001 fffffa80`03aa7370 fffffa80`069f0d40 : nt!KiPageFault+0x260
fffff880`09872470 00000000`00000001 : 00000000`00000001 fffffa80`03aa7370 fffffa80`069f0d40 fffff880`c01c0002 : eamonm+0x833b
fffff880`09872478 00000000`00000001 : fffffa80`03aa7370 fffffa80`069f0d40 fffff880`c01c0002 fffff800`031ab30d : 0x1
fffff880`09872480 fffffa80`03aa7370 : fffffa80`069f0d40 fffff880`c01c0002 fffff800`031ab30d fffff880`09878000 : 0x1
fffff880`09872488 fffffa80`069f0d40 : fffff880`c01c0002 fffff800`031ab30d fffff880`09878000 00000000`00000002 : 0xfffffa80`03aa7370
fffff880`09872490 fffff880`c01c0002 : fffff800`031ab30d fffff880`09878000 00000000`00000002 fffffa80`066f91a0 : 0xfffffa80`069f0d40
fffff880`09872498 fffff800`031ab30d : fffff880`09878000 00000000`00000002 fffffa80`066f91a0 00120196`00000064 : 0xfffff880`c01c0002
fffff880`098724a0 fffffa80`066f97b0 : fffffa80`039713c0 00000000`0000004e 00000000`1000000c fffffa80`045bd010 : nt!ExFreePoolWithTag+0x22d
fffff880`09872550 fffffa80`039713c0 : 00000000`0000004e 00000000`1000000c fffffa80`045bd010 fffffa80`066f99d0 : 0xfffffa80`066f97b0
fffff880`09872558 00000000`0000004e : 00000000`1000000c fffffa80`045bd010 fffffa80`066f99d0 fffff880`010dd067 : 0xfffffa80`039713c0
fffff880`09872560 00000000`1000000c : fffffa80`045bd010 fffffa80`066f99d0 fffff880`010dd067 fffffa80`045bd0c0 : 0x4e
fffff880`09872568 fffffa80`045bd010 : fffffa80`066f99d0 fffff880`010dd067 fffffa80`045bd0c0 fffffa80`045bd160 : 0x1000000c
fffff880`09872570 fffffa80`066f99d0 : fffff880`010dd067 fffffa80`045bd0c0 fffffa80`045bd160 fffff880`098725d0 : 0xfffffa80`045bd010
fffff880`09872578 fffff880`010dd067 : fffffa80`045bd0c0 fffffa80`045bd160 fffff880`098725d0 fffffa80`03e33901 : 0xfffffa80`066f99d0
fffff880`09872580 fffff880`010df9aa : fffffa80`03971300 fffffa80`071c1b00 fffffa80`03e33900 fffffa80`03ec7000 : fltmgr!FltpPerformPreCallbacks+0x2f7
fffff880`09872680 fffff880`010fd2a3 : fffffa80`039713c0 fffffa80`039713c0 fffffa80`039713c0 6d4e6f49`071c1b70 : fltmgr!FltpPassThroughInternal+0x4a
fffff880`098726b0 fffff800`0337743c : 00000000`00000005 fffffa80`0700a998 fffffa80`071c1b70 00000000`00000000 : fltmgr!FltpCreate+0x293
fffff880`09872760 fffff800`03372db8 : fffffa80`03e07cd0 fffff800`00000000 fffffa80`0700a7e0 fffffa80`00000001 : nt!IopParseDevice+0x14d3
fffff880`098728c0 fffff800`03373fd6 : 00000000`00000000 fffffa80`0700a7e0 fffff880`098729d0 fffffa80`037667b0 : nt!ObpLookupObjectName+0x588
fffff880`098729b0 fffff800`033758dc : fffffa80`067b2060 00000000`00000000 00000000`00000001 ffffffff`ffffffff : nt!ObOpenObjectByName+0x306
fffff880`09872a80 fffff800`03380ed4 : 00000000`00efd068 00000000`40100080 00000000`00efd0b8 00000000`00efd078 : nt!IopCreateFile+0x2bc
fffff880`09872b20 fffff800`03076e53 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!NtCreateFile+0x78
fffff880`09872bb0 00000000`776e180a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`00efcfe8 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x776e180a


STACK_COMMAND:  kb

FOLLOWUP_IP: 
eamonm+833b
fffff880`0261233b 493908          cmp     qword ptr [r8],rcx

SYMBOL_STACK_INDEX:  3

SYMBOL_NAME:  eamonm+833b

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: eamonm

IMAGE_NAME:  eamonm.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  4c18e225

FAILURE_BUCKET_ID:  X64_0xD1_eamonm+833b

BUCKET_ID:  X64_0xD1_eamonm+833b

Followup: MachineOwner
---------
Uninstall ESET. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

The other one is caused by ATI Function Driver for HD Audio Service.
Code:
*** WARNING: Unable to verify timestamp for AtihdW76.sys
*** ERROR: Module load completed but symbols could not be loaded for AtihdW76.sys
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000007E, {ffffffffc0000005, fffff88008932446, fffff880031af7e8, fffff880031af040}

Probably caused by : AtihdW76.sys ( AtihdW76+4446 )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common bugcheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003.  This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG.  This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG.  This will let us see why this breakpoint is
happening.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff88008932446, The address that the exception occurred at
Arg3: fffff880031af7e8, Exception Record Address
Arg4: fffff880031af040, Context Record Address

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

FAULTING_IP: 
AtihdW76+4446
fffff880`08932446 488b81f8000000  mov     rax,qword ptr [rcx+0F8h]

EXCEPTION_RECORD:  fffff880031af7e8 -- (.exr 0xfffff880031af7e8)
ExceptionAddress: fffff88008932446 (AtihdW76+0x0000000000004446)
   ExceptionCode: c0000005 (Access violation)
  ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 0000000000000000
   Parameter[1]: 00000000000000f8
Attempt to read from address 00000000000000f8

CONTEXT:  fffff880031af040 -- (.cxr 0xfffff880031af040)
rax=0000000000000000 rbx=fffffa800398e010 rcx=0000000000000000
rdx=fffff880031afaa0 rsi=0000000000000000 rdi=fffffa800391ca40
rip=fffff88008932446 rsp=fffff880031afa20 rbp=fffffa8003929414
 r8=fffffa800398e118  r9=0000000000000000 r10=0000000000000000
r11=fffff880031afa60 r12=fffffa8003929398 r13=0000000000000000
r14=0000000000000070 r15=0000000000000000
iopl=0         nv up ei ng nz na pe nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010282
AtihdW76+0x4446:
fffff880`08932446 488b81f8000000  mov     rax,qword ptr [rcx+0F8h] ds:002b:00000000`000000f8=????????????????
Resetting default scope

CUSTOMER_CRASH_COUNT:  1

PROCESS_NAME:  System

CURRENT_IRQL:  0

ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

EXCEPTION_PARAMETER1:  0000000000000000

EXCEPTION_PARAMETER2:  00000000000000f8

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800030b4100
GetUlongFromAddress: unable to read from fffff800030b41c0
 00000000000000f8 Nonpaged pool

FOLLOWUP_IP: 
AtihdW76+4446
fffff880`08932446 488b81f8000000  mov     rax,qword ptr [rcx+0F8h]

BUGCHECK_STR:  0x7E

DEFAULT_BUCKET_ID:  NULL_CLASS_PTR_DEREFERENCE

LAST_CONTROL_TRANSFER:  from 0000000000000000 to fffff88008932446

STACK_TEXT:  
fffff880`031afa20 00000000`00000000 : fffff880`08938230 00000000`00000000 fffffa80`0398e118 fffffa80`0398e130 : AtihdW76+0x4446


SYMBOL_STACK_INDEX:  0

SYMBOL_NAME:  AtihdW76+4446

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: AtihdW76

IMAGE_NAME:  AtihdW76.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  511d60fd

STACK_COMMAND:  .cxr 0xfffff880031af040 ; kb

FAILURE_BUCKET_ID:  X64_0x7E_AtihdW76+4446

BUCKET_ID:  X64_0x7E_AtihdW76+4446

Followup: MachineOwner
---------

2: kd> lmvm AtihdW76
start             end                 module name
fffff880`0892e000 fffff880`0894a000   AtihdW76 T (no symbols)           
    Loaded symbol image file: AtihdW76.sys
    Image path: \SystemRoot\system32\drivers\AtihdW76.sys
    Image name: AtihdW76.sys
    Timestamp:        Fri Feb 15 03:41:09 2013 (511D60FD)
    CheckSum:         00019F88
    ImageSize:        0001C000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
If you have any other audio device, uninstall it.

For any further issues, post it following the Blue Screen of Death (BSOD) Posting Instructions. Stray carsh dumps are not enough.
My System SpecsSystem Spec
Reply

 New BSOD Errors With Video Card




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD Games/Video/Web multiple errors - SFdiag & BlueScrn View in post
Hi all, I rarely post in forums as the answer is usually out there but I'm at a complete loss on this one and would really appreciate some help! I'm getting BSODs regularly, most common when playing games. I've been playing Rust and getting a crash anywhere from 5 min to an hour into game....
BSOD Help and Support
3 BSOD in a row; New SSD, RAM and Video Card
I recently (last weekend) replaced my RAM, OS HDD and Video Card. Today is the first time I've experienced any problems but I've had three BSOD in a row. The first two were while watching videos in VLC and the third was while trying to post here. Attached is my system info from the sevenforums...
BSOD Help and Support
Slow bootup, BSOD after selecting user, CHKDSK errors, loss of video
Windows 7 Professional 64-bit AMD Phenom II X2 550 Black (3.1 GHz dual-core) ASUS M4A77TD Pro Motherboard G.Skill DDR3-1600 memory 4 GB EVGA GeForce 9500 GT 1GB video Western Digital 1TB WD10EADS Caviar Green I built this computer for my uncle in 2009. He called me after BSOD problems...
BSOD Help and Support
USB external video card or AGP Video Card for Windows 7?
Hello everyone. I currently need a new video card for my Gateway e4610 small form desktop PC because my on-board graphics have apparently gone bad. My display is slanted or out of alignment. And after testing different monitors, hard drives, moving the PC to different rooms, checking wires,...
Graphic Cards
bsod video scheduler and attempt to reset video card
i have been gettings BSOD randomly already try -uninstall daemon -uninstall VGA driver,use driver sweeper in safe mode,install VGA driver my laptop compaq presario CQ42-176tx spec Compaq Presario CQ42-176TX, Speed 2.26Ghz, RAM 4GB Laptop/Notebook Price in India, Reviews & Specifications
BSOD Help and Support
BSOD - some video card errors and ram also.
Hello, I have bought a computer a week ago and I'm having some issues... Yesterday I used Hiren's Boot CD v10.6 (PC-Check) I have checked MotherBoard, Processor, 1 of my two mem. sticks and it was all good. When I tryed to check my other mem. stick and my video card mem. it wasn't that good, the...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:49.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App