Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD 0x00000124

08 Jan 2014   #31
paulpicks21

Windows 7 Professional 64 bit
 
 

Arhh OK, Thanks for clearing that up oddmut, like I said I had never heard of Castle Clash but I can understand what you mean now.
Unfortunately I can't help you with the flickering problem though. I will have a think about it all the same.

Paul.


My System SpecsSystem Spec
.
08 Jan 2014   #32
oddmut

Windows 7 Ultimate x64
 
 

After changing to the settings for Furmark see the image below. It's blue now.

I've also changed the bios settings to enable the cpu warning temps.
My System SpecsSystem Spec
08 Jan 2014   #33
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Much better, don't you think? Also, please keep watch on temps for a while to see how high they get while doing your normal things.Also, please keep us advised of your progress.
My System SpecsSystem Spec
.

09 Jan 2014   #34
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

And inform us any further BSOD, if there.
My System SpecsSystem Spec
09 Jan 2014   #35
paulpicks21

Windows 7 Professional 64 bit
 
 

Looks like the temp leveled off at 81C and stayed there, that seems fine seeing as it's Furmark which pushes things hard.
My System SpecsSystem Spec
09 Jan 2014   #36
oddmut

Windows 7 Ultimate x64
 
 

@Essenbe:
Yes much better.

Today I loaded up HW Monitor and IE for hotmail, and batman. Started going over my essays for USC and then my computer just shut down. No blue screen or any warnings. CPU temps I last saw before the shutdown was 23C. Hints to start troubleshooting?
My System SpecsSystem Spec
09 Jan 2014   #37
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Go to C:/Windows/minidump and see if there are any recent files there (the numbers are dates and time) If there please run tha SF diagnosyic took again (Blue Screen of Death (BSOD) Posting Instructions) also run sfc /scannow (SFC /SCANNOW Command - System File Checker) Have you done any work inside the computer? It's very easy to dislodge a wire. Check the wiring closely. Make sure all connections are fully seated. Also look for any bare or frayed wires.Your symptoms sound like it could be a dead short somewhere. Has this ever happened when using the front panel connections?
In your system specs you list the 770 and the 6850, (yes, I remember you changed during this thread this time) are both in the machine, and did you clean the AMD driver completely before installing the 770? I know I keep telling you to watch things, but it is really necessary. Keep a clode watch on the PSU voltages too.

When this happens, id there any particular activity you are usually doing or a program you are running whe it occurs?

From your description, it sounds like someone just pulled the power plug on the PSU. Is that a correct ubderstanding?

I am "sleep writing" so I hope I made sense.
My System SpecsSystem Spec
10 Jan 2014   #38
oddmut

Windows 7 Ultimate x64
 
 

Everything made sense.

The minidump area is empty and the results for sfc /scannow are

"Beginning verification phase of system scan.
Verification 100% complete.

Windows Resource Protection did not find any integrity violations."

The only work I've done inside the computer was switching the video card out. I really doubt I pulled any cable loose as I have everything zip tied down snugly.

I'm not sure of any patterns as the shutdown only happened once. I do notice, sometimes and randomly, whenever I boot my computer up from a cold boot after coming home it would turn on and the H80i would spin up and do the test then shut down and restart back up fine.

For uninstall the drivers for the 6850, I ran the uninstaller from Add/Remove Programs and I don't see anymore AMD software.

The behavior is just like when the power cord gets pulled, but the computer boots right back up.
My System SpecsSystem Spec
10 Jan 2014   #39
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

oddmut, to be honest, I'm at a loss unless it gets to be a continuing problem. There really isn't anything to go on. But, If I had to make a WAG, it would be your power supply just dropped voltage for a second causing the computer to shut down. Either that or there are wires in your computer that shorted out and caused the power to drop. I've known of that happening in some of the HAF cases from the front panel connectors. I own 3 HAF cases but have never had the problem. If it continues, maybe we will develope something to go on.

Are you having any other problems with the computer?
My System SpecsSystem Spec
11 Jan 2014   #40
oddmut

Windows 7 Ultimate x64
 
 

Understand.

I'm having no other problems.

Thank you.
My System SpecsSystem Spec
Reply

 BSOD 0x00000124




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random BSOD 0x00000124 Hall.dll (Bsod is distorted/static sound)
I have been getting a ton of bsods I have re installed video drivers, updated and reinstalled windows 8. Did countless hardware test(Video ram, check memory, Cpu test) all passed temperatures stay around 25-35 c. Recently uninstalled all video drivers and re installed. The bsods sometimes go...
BSOD Help and Support
BSOD 0x00000124
my old os is vista and yesterday i format it and install win7 ultimate sp1 32 bit using bootable flash drive. i'm having the same problem . when i run my windows in normal modes blue screen problem occur repeatedly. now im using my laptop in safe mode w/ networking Problem signature: Problem...
BSOD Help and Support
Keep getting BSOD - 0x00000124
My PC started freezing, so I decided to reboot it to factory settings. But now I am getting a BSOD. I have tried different Nvidia drivers (including latest) but that doesn't make a difference. I have also update sound and direct X drivers. I have run lots of malware and virus scans, done a memory...
BSOD Help and Support
BSOD With 0x00000124
Hi, This is my first time using any forum but I really need help to resolve this problem. I'm a pc noob of some sort, I've recently bought a budget gaming pc and I'm upgrading it part by part. Current System Spec: AMD Phenom II X6 1090T 4GB DDR3 ASROCK N68C-S UCC Corsair TX 750 ATI 6970...
BSOD Help and Support
BSOD 0x00000124
Hello my fellow computer geeks. I have encountered my first BSOD on my first computer built. I apologize for sounding like an amateur as it is my first time dealing with this problem. Problem: So, one day I start my computer and it blue screens with the STOP error 0x00000124. I assume it's...
BSOD Help and Support
BSOD 0x00000124
Hello all, A friend of mine is having some issues with his computer. I've asked for help on other forums, but they can't seem to help.. I'll try to make it as short as possible, here goes! My friend bought a computer 2 years ago, with the following specs: GTX280 Intel Core2Duo E8500 MSI...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:21.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App