Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD after pc boot with new motherboard

26 Dec 2013   #21
carwiz

Windows 7 Pro-x64
 
 

There's no dump files in your upload. Also, What are you using to do a "fresh install"? I don't understand why you would get a AdwCleaner listing from a fresh install. Also, there's numerous third party utilities running that I know didn't come from a Windows install disk.


My System SpecsSystem Spec
.
26 Dec 2013   #22
LleBlanc1987

Windows 7 Home Premium
 
 

By fresh install i mean formatting the hdd and installing a new copy of windows from the install disk. After i installed windows the only things i have installed were updated drivers for the motherboard, updated drivers for my video card, microsoft security essentials, a microsoft hd webcam, minecraft launcher, steam launcher, chrome web browser, 64-bit java, and UxStyle. I have windows configured to create dump files. I re-ran diagnostic tool and have included the new zip file.
My System SpecsSystem Spec
26 Dec 2013   #23
carwiz

Windows 7 Pro-x64
 
 

Still no dump file(s). The W7 utility picks up the dump files and logs from the default location. If you've changed environment variable or changed the location of the dump files, you'll need to change them back to defaults. The image below shows the default location for dump files and their setup.

It would seem to me that your "fresh install" is corrupt. It would make more sense to install software packages one at a time and validate a stable system before loading the next. One of your packages may be causing the problem or is incompatible with a previously loaded package. Roll back to a point where you have all necessary drivers and MSE. Install one at a time and follow each with a few stress tests like Furmark and Prime95.
My System SpecsSystem Spec
.

26 Dec 2013   #24
LleBlanc1987

Windows 7 Home Premium
 
 

thanks for that. it was set to create kernel dumps and not memory dumps. if i get another bsod i will pot the new files.

a question about ram...

the ram i have installed is not listed on the motherboard (Gigabyte) compatibility list, but is listed as compatible on the ram (Crucial) website. I noticed that the last of the 3 BDOSs i had earlier was a MEMORY_MANAGEMENT.

Would the ram compatibility be an issue for this?
My System SpecsSystem Spec
26 Dec 2013   #25
carwiz

Windows 7 Pro-x64
 
 

Yes, memory compatibility is major issue. I would use the motherboard specs. I can never navigate the Gigabytes site so I can't see the specs on your board. The memory modules need to match this spec exactly. Timings and voltage are critical.
My System SpecsSystem Spec
26 Dec 2013   #26
LleBlanc1987

Windows 7 Home Premium
 
 

the memory i have installed now and the memory i was looking into (it is on the motherboard support list) have identical frequency and timings. went into bios and everything is set where it should be. what would make one compatible and the other not?
My System SpecsSystem Spec
26 Dec 2013   #27
carwiz

Windows 7 Pro-x64
 
 

I don't know. I can't see the specs. There's more to it than just the five numbers normally shown. Besides voltage, you have to know if the motherboard supports the JDEC table of the memory. Or if the memory is XMP capable.
My System SpecsSystem Spec
Reply

 BSOD after pc boot with new motherboard




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
W7, trying to boot off of usb, msi motherboard
Hallo, I'm trying to boot off of an external harddrive on usb that has windows 7 on it, but I can't seem to get my computer to boot off of it..I have some pictures attached of my bios which Id think would be the only parts to enable booting from usb ..I'm not sure if there would be something else I...
Hardware & Devices
Will it boot with another motherboard?
Hello I am looking at using either the W7 built in or buying Acronis True Image. Suppse I clone my entire Hard Drive to an external USB Drive. Will the image boot even if I have changed motherboard or other hardware? I was under the impression that it will boot but with a lot of errors since the...
Backup and Restore
OS will not boot since motherboard replaced
Motherboard died in a custom arcade machine, Replaced motherboard but of course it will not boot. Anyway i can get the serial key for windows "out" of the hard drive? This is a custom machine with no sticker. Also, if by doing a fresh install, will I lose any data on hard drive? Does it format when...
Installation & Setup
Windows won't boot. I think due to my motherboard
I have a custom built desktop and recently it has been blue screening quite often. I have tried some of the procedures to repair it but nothing has worked. Now i have encountered another problem. I restart my computer and it stays at a black screen with a small "99" in the bottom right of the...
General Discussion
Motherboard change. Won't boot up
My old motherboard (MSI P4M900M@-L MSI Global ? Mainboard - P4M900M2-L) was not working as in the display was blank and no signal was being recieved by the monitor. So I went shopping and they sold me a new motherboard (MSI G31TM-P31 MSI Global ? Mainboard - G31TM-P31). After i installed the new...
Hardware & Devices
installing new motherboard will win7 still boot?
Hi, I am installing a new motherboard in my mum's pc but using the same ram, cpu, dvd rom drive and Hard drive. Her current mobo also has built in graphics, sound and Lan. My question is will her current hard drive with her win7 o/s boot on the new motherboard? I don't really want to have...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:17.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App