Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Frequest BSOD/Crashing many without any error/dump files

09 Jan 2014   #21
kanu2k14

Windows 7 Ultimate x64
 
 

I did check that. That's the problem there is no Disk3. Do you think the Harddisk3 would be the 500GB with C Drive??




My System SpecsSystem Spec
.
09 Jan 2014   #22
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Your Disk3 is the western digital one.
My System SpecsSystem Spec
09 Jan 2014   #23
kanu2k14

Windows 7 Ultimate x64
 
 

Thanks. I thought so. Will do a check tonight and see whats the result. Thanks guys
My System SpecsSystem Spec
.

09 Jan 2014   #24
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Yes, Windows has the stupidity to call the first disk, "Disk 0" I've always thought that inane.
My System SpecsSystem Spec
14 Jan 2014   #25
kanu2k14

Windows 7 Ultimate x64
 
 

Hey Guys,
I think I may have found the culprit. As I can't get a spare Motherboard to check I just researched a bit and found that my PSU voltage are not in tolerable zone.
Check the 12v voltage below:





I will try to find a multimeter from somewhere and check if these are showing the right voltages or not.
What do you guys say????
My System SpecsSystem Spec
14 Jan 2014   #26
kanu2k14

Windows 7 Ultimate x64
 
 

But just checked the BIOS screen and found below.

Ah man its too complicated, this shows ok voltage. Not sure about the CPU fan speed why its too much.
My System SpecsSystem Spec
15 Jan 2014   #27
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Try that again without Furmark running.
It may be a glitch with HW Monitor, try HW Info for your architecture.
HWiNFO, HWiNFO32/64 - Download
Use the burtons labeled "Download Installer, the others are crapwares.

BIOS has a much lower power draw than Windows so the PSU may not be keeping up under load.
My System SpecsSystem Spec
15 Jan 2014   #28
kanu2k14

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by Britton30 View Post
Try that again without Furmark running.
It may be a glitch with HW Monitor, try HW Info for your architecture.
HWiNFO, HWiNFO32/64 - Download
Use the burtons labeled "Download Installer, the others are crapwares.

BIOS has a much lower power draw than Windows so the PSU may not be keeping up under load.
Done Mate. HW Monitor is showing the same values.
I downloaded the HW Info but could not find the 12v values. Below is the screenshot


Any ideas?
My System SpecsSystem Spec
18 Jan 2014   #29
kanu2k14

Windows 7 Ultimate x64
 
 

So I took my PC to a Local PC repair shop nearby. He too was not exactly able to figure out the problem, but said that this maybe coming due to Thermal paste which had dried/old which he then cleaned and put new. Also he checked the PSU with multimeter by putting a wire between to points to run the fan and then checking the voltages and all were perfectly OK. So I'm now confused as to what may be causing that BSOD and crashes. I have reinstalled my 64bit OS and working on it. Will see if it crashes again or not. Hoping for the best.
Thanks for the help Guys.
My System SpecsSystem Spec
18 Jan 2014   #30
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

The missing +12V value may indicate a bad sensor chip on the board. Your +5V value is way too low, the limit is 4.75V.
A PSU's output can't be checked if not under load.

Attachment 302242
My System SpecsSystem Spec
Reply

 Frequest BSOD/Crashing many without any error/dump files




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD after power cut out, don't know error # but have dump files
So my power went off very briefly while I was on the computer. It turned back on itself to resume, but then got the blue screen of death and shut down a few seconds after start up. I tried restarting, completely shutting it down and starting it, but it keeps shutting down with BSOD maybe 30 seconds...
BSOD Help and Support
BSOD - Dump files included error:
Hey Guys, I have been experiencing a really werid issue I cannot figure out. I was hoping you could give me a hand in identifying the culprit. Its hard to get the issue fixed because it happens at random intervals it can happen twice a week then not happen for a month. -When the issue occurs...
BSOD Help and Support
BSOD error dump files (blue screen error) please help
http://www.sevenforums.com/attachment.php?attachmentid=188494&stc=1&d=1324019702 dump file attachment I am getting the blue screen error. but it is not significant. happens anytime. sometims pc works 24 hours without error. somtimes it comes. please help.
BSOD Help and Support
BSOD Crashing/dump files attached
Hello, I keep getting a BSOD error. I don't know what is the cause so I am putting the dump up here and hopefully someone can help me find the cause. :D
BSOD Help and Support
Frequest BSODs and Crashing Programs
Hi! I'm experiencing frequent crashes on my desktop and I'd be grateful if someone can help me out. :) These crashes have always been there. I've tried reinstalling Windows twice, updates Windows and all my drivers, and even ran a registry cleanup. I'm also experiencing some instability in...
BSOD Help and Support
Frequest BSOD Dump Attached
Hi Everyone, Attached you can find my latest 3 dump files. I've been dealing with the problem for awhile now and I'm hoping someone on here will be kind enough to help me out. I get a random BSOD every so often (about one a day). It doesn't matter what I am doing. I can be either...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:28.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App