Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD playing DayZ (arma 2 + standalone) only

22 Dec 2013   #1
kooper35

Windows 7 Home Premium x64
 
 
BSOD playing DayZ (arma 2 + standalone) only

Hi sevenforums

At my wits end. After running and passing every single test I can find I'm at a loss as to why my new rig bombs a few mins into playing Arma 2 / DayZ standalone.

. I ran Memtest 86+ and completed 4 passes
. Finished the Burn-in test on Furmark
. Finished Prime95... err
. Ran Chkdsk /R on Sata and SSD

After reading a similar post the only thing I can think of is my Belkin Wireless N has slightly ropey drivers but I have the right version installed according to the website.

have filled in my systems specs but didnt have an option for psu so here it is.
Corsair 2013 Edition Gamer Series GS 800W '80 Plus Bronze' Power Supply

I hope you can help

Koop


My System SpecsSystem Spec
.
22 Dec 2013   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Hi kooper35.

A stop 0x124 is usually a hardware failure, and in your case it is accompanied with display failure.
Code:
BugCheck 124, {0, fffffa8007975028, bf800000, 124}

*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : GenuineIntel

Followup: MachineOwner
---------
Are you overclocking? As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings.

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator
Also let us know the wattage of the PSU.

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark
Let us see a screenshot of the furmark screen, before you close it.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.
If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Stress test the CPU.
Hardware - Stress Test With Prime95

About the display driver .... unfortunately all available versions applicable to a GTX 760 are somehow unstable. But if situation demands, this driver is also need to be alter, after getting the results of the tests.

Let us know the results.
My System SpecsSystem Spec
22 Dec 2013   #3
kooper35

Windows 7 Home Premium x64
 
 

I've not overclocked anything on my system. its all running at stock, I have noticed on 'core temp' that my cpu seems to throttle back and at times goes all the way up to 4.3Ghz

http://speccy.piriform.com/results/C...FYhpfQk4jsqaUc

Extreme calculator: I need 554w psu (so 800w is fine)
Furmark just bombed, gpu1 leveled off at 77'oC and gpu2 @ 80'oC but got a bsod at around 40% through test.

Not had time to run Prime95 just yet as my daughter is blagging my head and a full night of memtesting is off the cards as my wife is ultra paranoid about devices being left on :| 4 clean passes isn't enough?
My System SpecsSystem Spec
.

23 Dec 2013   #4
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by kooper35 View Post
Furmark just bombed, gpu1 leveled off at 77'oC and gpu2 @ 80'oC but got a bsod at around 40% through test.
Before running memtest or prime95, furmark gives us some significant information.

If it BSODs during the stress test, the GPU is faulty and needs to be replaced. Whenever it will feel a stress, it will cause BSODs.
My System SpecsSystem Spec
05 Jan 2014   #5
kooper35

Windows 7 Home Premium x64
 
 

I don't mean to bring up an old thread but after disabling the apparently faulty graphics card which bsod'd everytime I ran furmark and running off a single gtx 760 I managed to run off an entire furmark burn-in.

I've had a couple of weeks bsod free then all of a sudden 2 in one day. I forget what I was doing for the first but the second occured about 3 hours into a game of DayZ (standalone). I checked 'BlueScreenView' and it appers to be another 0x124 error code :/

Is it plain unlucky to order 2 faulty graphics cards off OC or has it something to do with the first still being attached to the system in sli?
My System SpecsSystem Spec
Reply

 BSOD playing DayZ (arma 2 + standalone) only




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Is there any chance of DayZ Standalone running on my laptop?
Hey all, it's TheMuffinMan again, and I just recently got a steam gift card. I have wanted DayZ standalone for a while now, and I finally have the money for it. I have 4 GB of RAM, AMD E-450 APU with Radeon HD Graphics 1.65 GHz. Please tell me how many frames I would get. Thanks!
Gaming
DayZ Standalone Specs
Just curious, but can anyone tell me if laptop would be able to properly play this new multi-player online game?
Gaming
BSOD playing ARMA II Mod: DayZ
Hello, I've been searching on this forum to solve my BSOD problem playing DayZ, but nothing helped. My pc has been sent back to the person who assembled it (it is a Custom Built PC). He did stress test and found no issues whatsoever. He has also installed all the required drivers. I am here now,...
Gaming
BSOD while playing ARMAII/DayZ, sometimes outside of game also.
Happened once or twice earlier this week. Happened about 5 times tonight while playing DayZ System Specs: Intel Core i5-2500K 3.3GHz Quad-Core Processor Xigmatek GAIA SD1283 56.3 CFM CPU Cooler ASRock Z68 Extreme3 Gen3 ATX LGA1155 Motherboard G.Skill Ripjaws Series 8GB (2 x 4GB) DDR3-1600...
BSOD Help and Support
BSOD while playing ARMA 2
While playing ARMA2 my PC crashes out to the BSOD attached are all the files from the diag tool. The system is a new build and i've had a few good days of use now it's giving me hell any help would be greatly welcomed -Tek1t : changed filename to correct convention
BSOD Help and Support
BSOD when playing arma 2 dayz.
Sometimes i get blue screen when i start dayz but everytime when i close the dayz Do i get it. help
Gaming


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:52.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App