Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: ntoskrnl.exe BSOD even after reinstall

22 Dec 2013   #1
jarjacksn

Windows 8.1 Pro x64
 
 
ntoskrnl.exe BSOD even after reinstall

Sorry I could not compile very much information, because my computer will no longer even boot Windows.

Background: My desktop had Windows 7 installed a year or 2 ago. I then upgraded to windows 8 pro. It was like that for about a year, everything perfect. It could run games like a beast. But then I started getting ntoskrnl.exe BSODs. Here are some of the errors I was getting:
KERNEL_SECURITY_CHECK_FAILURE
SYSTEM SERVICE EXCEPTION
MEMORY MANAGMENT

They occured a couple minutes after turning on my computer. I compiled all the minidumps here:
https://drive.google.com/folderview?...ms&usp=sharing
So I sucked it up an completely formatted my hard drive and installed Windows 8.1 Pro x64. It was the only option, since nothing seemed to fix my issue.

After Re-install: Everything seemed to work fine, so I was relieved. I started installing my programs. For like 5 minutes. Then it happened again. Then after I tried to restart, and right after it boots it BSOD every time. Windows says "preparing automatic repair" several times but does nothing. That makes me think it is a hardware problem. I hope not. Sorry I could not get the few minidumps off of the new Windows install, but trust me they were the same thing.

The info on the BSODs I have comes from WhoCrashed, and I have the ability to boot into Linux. What should I do? Any ideas on what the problem is? What troubleshooting should I try?

I know you people here might need more information, so just ask and I will try to provide.


My System SpecsSystem Spec
.
22 Dec 2013   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

My System SpecsSystem Spec
22 Dec 2013   #3
jarjacksn

Windows 8.1 Pro x64
 
 

Quote   Quote: Originally Posted by Arc View Post
Sorry at the time I couldn't even get into Windows. Now I can. I did memtest86 and it gave the ram lots of errors so I swapped it out for new 8gb of ram.

But then it would beep really fast so I removed one stick and it worked.

But then it still wouldnt show anything on screen so I removed the graphics card and it worked fine.

So now its missing a graphics card and a ram stick and it works, but i'm really confused. Any ideas?
My System SpecsSystem Spec
.

23 Dec 2013   #4
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

No idea will be a valid one without seeing the necessary data.
My System SpecsSystem Spec
23 Dec 2013   #5
jarjacksn

Windows 8.1 Pro x64
 
 

Quote   Quote: Originally Posted by Arc View Post
No idea will be a valid one without seeing the necessary data.
Ok just listen for a second. There are no more BSOD. Everything is working fine.

I did your Diagnostics Tool thing on the BSOD posting instructions anyway, on the fresh 8.1 install without the graphics card both ram sticks. The dumps might be helpful but probably not as much as the original dumps in the first post. I attached to output of the diagnostics tool.

I figured out both ram sticks can be in the computer and everything works fine. With both ram sticks in and the gfx card in, it makes beeping noises. With 1 ram stick in and the graphics card, it'll work fine just not show anything on the screen on either the integrated or gfx card port. So everything works fine without my graphics card in.
My System SpecsSystem Spec
23 Dec 2013   #6
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by jarjacksn View Post
Quote   Quote: Originally Posted by Arc View Post
No idea will be a valid one without seeing the necessary data.
Ok just listen for a second. There are no more BSOD. Everything is working fine.
Good news.

But what you have stated, and what this BSOD indicates .....
Code:
KERNEL_SECURITY_CHECK_FAILURE (139)
A kernel component has corrupted a critical data structure.  The corruption
could potentially allow a malicious user to gain control of this machine.
..... is not vary fair.

I hope you installed windows 8 after getting this BSOD. So the issue should be over here, as This issue occurs because of a potential race condition that occurs in the enumeration of TCP connections. With a clean install, it is gone.

But when the board is failing to control all the items on it at once, it is the fault of the board itself. And it is not any unique issue; it is seen widely. Still, try to install the BIOS version F20d from GIGABYTE - Motherboard - Socket 1155 - GA-Z77X-UD3H (rev. 1.0). Sometimes the BIOS updates makes the board stable. Moreover it has some extended support for Win8.

Use @BIOS (found under utilities in Gigabyte's page) to update the BIOS.
My System SpecsSystem Spec
23 Dec 2013   #7
jarjacksn

Windows 8.1 Pro x64
 
 

Thanks for the help. I put my 650 ti in my brother's Ubuntu computer and plugged it in and it worked fine and got recognized, so I don't think the card is dead.

Yeah I thought the BSOD didn't indicate much.

What do you mean installed 8 after this BSOD. Well after I started to get it I re-installed with 8.1, not the 8.0 I had before. It only had 7 on it a long time ago but I upgraded.

I am currently running a memtest86+ 5.01 just cause, coming up with 0 errors. This is with the 2 4gig sticks. I will update the bios how you told me and then report back. Thanks so much!

Also, any ideas on the RAM? The 16gb sticks work fine in my brothers computer but give so much memtest errors in mine and were what were causing the issues before I think.
My System SpecsSystem Spec
23 Dec 2013   #8
jarjacksn

Windows 8.1 Pro x64
 
 

Quote   Quote: Originally Posted by Arc View Post
Quote   Quote: Originally Posted by jarjacksn View Post
Quote   Quote: Originally Posted by Arc View Post
No idea will be a valid one without seeing the necessary data.
Ok just listen for a second. There are no more BSOD. Everything is working fine.
Good news.

But what you have stated, and what this BSOD indicates .....
Code:
KERNEL_SECURITY_CHECK_FAILURE (139)
A kernel component has corrupted a critical data structure.  The corruption
could potentially allow a malicious user to gain control of this machine.
..... is not vary fair.

I hope you installed windows 8 after getting this BSOD. So the issue should be over here, as This issue occurs because of a potential race condition that occurs in the enumeration of TCP connections. With a clean install, it is gone.

But when the board is failing to control all the items on it at once, it is the fault of the board itself. And it is not any unique issue; it is seen widely. Still, try to install the BIOS version F20d from GIGABYTE - Motherboard - Socket 1155 - GA-Z77X-UD3H (rev. 1.0). Sometimes the BIOS updates makes the board stable. Moreover it has some extended support for Win8.

Use @BIOS (found under utilities in Gigabyte's page) to update the BIOS.
THANK YOU SO MUCH! It's fixed!
My System SpecsSystem Spec
24 Dec 2013   #9
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by jarjacksn View Post

THANK YOU SO MUCH! It's fixed!
Let us know for any further issue.
My System SpecsSystem Spec
25 Dec 2013   #10
jarjacksn

Windows 8.1 Pro x64
 
 

Quote   Quote: Originally Posted by Arc View Post
Quote   Quote: Originally Posted by jarjacksn View Post

THANK YOU SO MUCH! It's fixed!
Let us know for any further issue.
Actually, I have one question. The 16gb of RAM that I was using in my desktop before that were from my brothers computer, are getting lots of memtest86 errors in it, and the Windows 8.1 install usb blue screens when it boots. The funny things is, the computer works perfect with Linux though, no errors.

His computer works fine, boots up, everything perfect, runs linux fine (he had it installed). But memtest brings up loads of errors like it did on mine and Windows usb stick won't start, it actually BSOD after loading.
My System SpecsSystem Spec
Reply

 ntoskrnl.exe BSOD even after reinstall




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
0x00000124 ntoskrnl.exe ntoskrnl.exe+4a63cc BSOD Error runninganygame
i keep getting BSOD when playing game new graphics i dont know where to start when its comes to BSOD stuff 110414-10576-01.dmp 11/4/2014 10:48:39 PM 0x00000124 00000000`00000000 fffffa80`0af318f8 00000000`00000000 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+4a63cc ...
BSOD Help and Support
BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys
Hi, to make things easier for you,below is the Bug Check String, Driver, and crash address SYSTEM_SERVICE_EXCEPTION___dxgmms1.sys___ntoskrnl.exe+75bc0 MEMORY_MANAGEMENT_______ntoskrnl.exe____ntoskrnl.exe+75bc0 SYSTEM_SERVICE_EXCEPTION___ntoskrnl.exe____ntoskrnl.exe+75bc0...
BSOD Help and Support
BSOD 0x1000007e for ntoskrnl.exe after Sys Recovery Disks reinstall
Dell XPS 435T/9000 with Win 7 64-Bit I was having all kinds of BSOD and system freezing issues so I decided to do a re-install 2 days ago from my system recovery disks to return to a factory image. I had some issues with the monitor blanking as reported here. I got the system up, updated...
BSOD Help and Support
BSOD when goes sleep, ntoskrnl.exe+e96d2/ntoskrnl.exe+81e7a
When I put my pc in sleep mode it often crashes: the screen goes normally in sleep mode, but the pc continues to stay awake for several minutes than BSOD & restart or BSOD & shut off. Thanks to BlueScreenView I found what is seemingly the guilty process, but I don't know what to do now. Thanks...
BSOD Help and Support
BSOD ntoskrnl.exe , All the Time !! Crash Address ntoskrnl.exe+80640
Jan 2014 //------------------------------------------- How to Solve : 1- I've uninstalled my windows and recover my laptop with recovery DVD to it's original factory state.(original windows :)) 2- Never installed Norton internet security again , I'm using Microsoft Security Essentials now. 3-...
BSOD Help and Support
Random BSOD Reporting ntoskrnl.exe+75c40 & ntoskrnl.exe+7efc0
I'm getting random Blue Screens and can't figure out why. I'm not running any hardcore programs. I'm mostly just using Microsoft Office and Firefox. The BSOD's seem to happen when I'm in Outlook, Excel or Firefox. Haven't been able to determine exactly which at the time as I'm moving back and...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:33.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App