Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Repeated Bluescreens

26 Dec 2013   #1
louisfrnch

Windows 7 Professional x64
 
 
Repeated Bluescreens

Hi,

I was previously on Windows XP on an old custom build system, and all has been running fine very rare bluescreen issues. Likely once a month.

After recently upgrading the custom build to a new motherboard, power supply replacement, and extra internal disks added, and installed Windows 7 Professional x 64, I started experiencing bluescreen. The custom build was taken to shop that did the upgrade, and after few days testing their end really pushing the system hard, no bluescreen was noted. Only thing they noted was the old existing power supply looks not powerful enough for my motherboard. So I upgraded the final hardware component by getting a newer power supply the shop recommended would work best with the later motherboard.

Custom build was given back to me, and unfortunately I keep experiencing bluescreen again. PC is only being left on, with nothing being done on it, other than regular backups that takes place in real time, from an internal disk to an external disk.

I eventually decided to disable the daily backup suspecting that perhaps this could be the issue. But unfortunately I still experience the bluescreen

So here I am to try and get experts advice on why this keeps happening.

Zip file is attached. I look forward for some advice to try and isolate the root cause.

Thank You


My System SpecsSystem Spec
.
26 Dec 2013   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Hi louisfrnch.

The TP link adapter driver is failing.
Code:
fffff880`032b72f8  fffff880`05850010Unable to load image athrx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for athrx.sys
*** ERROR: Module load completed but symbols could not be loaded for athrx.sys
 athrx+0x1c010
And it is too old.
Code:
fffff880`05834000 fffff880`05adb000   athrx    T (no symbols)           
    Loaded symbol image file: athrx.sys
    Image path: athrx.sys
    Image name: athrx.sys
    Timestamp:        Wed Jul 20 19:03:03 2011 (4E26D90F)
    CheckSum:         002AB26D
    ImageSize:        002A7000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update it from Download - Welcome to TP-LINK, by matching your Device number.

Some issues are with Norton, too.
Code:
fffff880`0bcfb6f8  fffff880`04ab0a12Unable to load image BHDrvx64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for BHDrvx64.sys
*** ERROR: Module load completed but symbols could not be loaded for BHDrvx64.sys
 BHDrvx64+0xa1a12
This driver means:
Code:
\??\c:\program files (x86)\norton 360\nortondata\21.1.0.18\definitions\bashdefs\20131203.001\bhdrvx64.sys
Uninstall Norton and all Symentec products using Norton Removal tool. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Also, for a safety reason, test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the results.
________________________________________________________________________________________
Code:
BugCheck 18, {fffffa80190ddde0, fffffa801cec0060, 1, 2000000000000}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+48d8a )

Followup: MachineOwner
-------------------------------------------------------------------------------------
BugCheck 1E, {0, 0, 0, 0}

Probably caused by : NETIO.SYS ( NETIO!RtlGetNextExpiredTimerWheelEntry+5e )

Followup: MachineOwner
--------------------------------------------------------------------------------------
BugCheck 4E, {99, 580266, 2, 56054d}

Probably caused by : memory_corruption ( nt!MiBadShareCount+4c )

Followup: MachineOwner
---------
My System SpecsSystem Spec
27 Dec 2013   #3
louisfrnch

Windows 7 Professional x64
 
 

Quote:
Update it from Download - Welcome to TP-LINK, by matching your Device number.
Mine is TL-WN781ND V2. Have downloaded and installed latest and the file athrx.sys latest is dated 29-Jul-2011 now.

Quote:
Some issues are with Norton, too.
I've discussed with Norton and they've advised I re-install the software using their Norton Remove and Reinstall Tool. I've done this at this stage.

Quote:
Also, for a safety reason, test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.
With this I've created a usb bootable using the installation file but I can't get usb to boot and run memtest tool. 4 x files was installed on usb stick.
My System SpecsSystem Spec
.

27 Dec 2013   #4
louisfrnch

Windows 7 Professional x64
 
 

Sad to say despite the changes that was done, two more bluescreens have occurred. Should files be sent again to see the cause now ?
My System SpecsSystem Spec
28 Dec 2013   #5
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by louisfrnch View Post
Sad to say despite the changes that was done, two more bluescreens have occurred. Should files be sent again to see the cause now ?
Yes.
My System SpecsSystem Spec
28 Dec 2013   #6
louisfrnch

Windows 7 Professional x64
 
 

New zip file attached. 3 x bluescreens occurred actually. With the TP link adapter, it's straight out of the box from shop when pc was upgraded last month. Norton am a bit surprised as I run it on other PCs with no issues. Anyway be curious to know what the 3 x recent ones are about. Thanks for your help on this matter
My System SpecsSystem Spec
28 Dec 2013   #7
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

If you fail to get any update to the TP link device, replace it with another adapter.
Code:
fffff800`04c44788  fffff880`04febac3Unable to load image athrx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for athrx.sys
*** ERROR: Module load completed but symbols could not be loaded for athrx.sys
 athrx+0x1d7ac3
Because it is still failing and contributing to the BSOD.

Update the Intel USB3 Driver.
Code:
fffff800`04c440a8  fffff880`04d17f60Unable to load image iusb3xhc.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for iusb3xhc.sys
*** ERROR: Module load completed but symbols could not be loaded for iusb3xhc.sys
 iusb3xhc+0x79f60
Get it from https://downloadcenter.intel.com/Det...ivers&lang=eng

Install the NVIDIA DRIVERS 314.22WHQL only.
  • Uninstall All nvidia items in Control Panel > Programs and features
    • 3D Vision Control Driver
    • 3D Vision Driver
    • Graphics Driver
    • HD Audio Driver
    • PhysX
    • nvidia Update
    (Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
  • Now follow Drivers - Clean Left over Files after Uninstalling
  • Download 314.22 WHQL. While installing, Select Custom (Advanced) install. In the next page, follow this settings:

Because, all other versions after it are unstable, and it is the same for you, too.

But, if I see one more BSOD zip pointing Norton as failing, I will unsubscribe from your thread. If you dont take the suggestions, you are at your own.
Code:
fffff880`0a78dd18  fffff880`042cc110Unable to load image SYMEVENT64x86.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SYMEVENT64x86.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMEVENT64x86.SYS
 SYMEVENT64x86+0x26110
---------------------------------------------------------------------------------------------
fffff880`0a78d958  fffff880`0476bd43Unable to load image BHDrvx64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for BHDrvx64.sys
*** ERROR: Module load completed but symbols could not be loaded for BHDrvx64.sys
 BHDrvx64+0x10ed43
My System SpecsSystem Spec
28 Dec 2013   #8
louisfrnch

Windows 7 Professional x64
 
 

Quote:
If you fail to get any update to the TP link device, replace it with another adapter.

Because it is still failing and contributing to the BSOD.
I've uninstalled TP link entirely and will take it back to computer shop for a refund soon. Not sure if they give other models. Else will shop for another one elsewhere. Any recommended ones for this? In meantime am using the on board NIC using cable to wireless router

Quote:
Update the Intel USB3 Driver.

Get it from https://downloadcenter.intel.com/Det...ivers&lang=eng

I followed the site and downloaded the file. However when I run the Setup.exe file, I get this message

"Error: This computer does not meet the minimum requirements for installing the software"

I did give correct motherboard details.

The Intel USB 3.0 eXtensible Host Controller Driver from Program and Features is dated installed on 19/11/2013.

Quote:
Uninstall All nvidia items in Control Panel > Programs and features
  • 3D Vision Control Driver
  • 3D Vision Driver
  • Graphics Driver
  • HD Audio Driver
  • PhysX
  • nvidia Update
(Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
Uninstalled what was listed above. While Graphics Driver was being uninstalled, I lost display to a blackscreen for a while, and could not do see anything on computer. Waited for 10 mins and decided to force shutdown computer from power switch and powered back on. I resume from log in. Graphics Driver was uninstalled. I tried uninstalling PhysX and got a message

"NVIDIA Uninstaller cannot continue. Found New Hardware is open. Close the wizard to continue installation or wait until it is finished."

Windows was downloading the Video Controller (VGA Compactible). I clicked on Skip obtaining driver software from Windows Update but it still continuing installing a driver software without downloading. It asked for a restart, which I did. This re-installed

NVIDIA 3D Vision Driver 331.58
NVIDIA Ge Force Experience 1.6.1.2
NVIDIA Graphics Driver 331.58
NVIDIA PhysX System Software 9.13.0725

Am not using chipset drivers. It's a GE Force card I had that I kept after upgrading motherboard.



I've downloaded "Display Driver Uninstaller Download version 9.9.2"


I restarted and went in Safe Mode with Networking and uninstalled

NVIDIA 3D Vision Driver 331.58
NVIDIA Ge Force Experience 1.6.1.2Then ran the Display Driver Uninstallerand used the Clean and Restart option with options
Remove PhysX
Save log files in startup path

PC was restarted and now from normal mode,

Quote:
Download 314.22 WHQL. While installing, Select Custom (Advanced) install. In the next page, follow this settings:
Did this one next. I had no HD Driver option. After installation and restart, I confirm

NVIDIA Graphics Driver 314.22
NVIDIA PhysX
NVIDIA PhysX System Software 9.12.1031

are only components showing from Programs and Features.


Quote:
But, if I see one more BSOD zip pointing Norton as failing, I will unsubscribe from your thread. If you dont take the suggestions, you are at your own.
No need to harass newbies. A simple please will do Norton 360 was uninstalled completely this time as it's re-current causing crashes on this PC.

Quote:
Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.
This was installed and I used MBAM Pro instead over free one.

Need to see why I can't use memset86+ going. Any advice there ?

I can't update USB 3.0 either.

Will see what happens next while I leave computer on with no work being done on this PC.
My System SpecsSystem Spec
29 Dec 2013   #9
louisfrnch

Windows 7 Professional x64
 
 

Quote:
Need to see why I can't use memset86+ going. Any advice there ?
Will test the usb stick on another computer to see if it boots. 4 x files was installed on stick

1. Copying;
2. mt86plus;
3. Readme.txt, and;
4. syslinux.cfg
My System SpecsSystem Spec
29 Dec 2013   #10
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

I will not say "please" to you, coz what I am saying to you is for you; I will not be benefited anyhow if you do it. And, if you dont take the suggestions, that is the harassment to me; not to you.

I found the existence of norton in your latest crash dump. If it is uninstalled properly, it should not be there anyhow.

For MBAM, it would be good if you stayed with the free version. There is reason that I suggested for the free one only.

I see that the USB3 driver I suggested earlier is not appropriate for your 8 series chip. Better you go to GIGABYTE - Motherboard - Socket 1150 - GA-Z87-HD3 (rev. 1.x), and get the Intel USB 3.0 Driver from there.

Also try to update to the F6 BIOS. There must be some good reason that the F4 version (your one) is removed from the listing, despite of it not being old. Use @BIOS to update the BIOS; it is available under utilities. (Dont get any other utilities, BTW.)

Memtest86+ is not working? Not an usual situation. What happens if you boot from the bootable CD or USB?

Finally, lack of driver is a very common for TP Link devices. TP Link sells the adapters, but the drivers are actually developed by Atheros. So sometimes those are not properly updated. It is always better to choose a brand who develop their drivers themselves, like Qualicomm Atheros.
My System SpecsSystem Spec
Reply

 Repeated Bluescreens




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Bluescreens every day
My buddies computer is getting bluescreens out the wazoo. The memory dumps show about 5 different errors usually so we need help please. Thanks in advance
BSOD Help and Support
I keep getting bluescreens from BC2
Hello everyone. I'm new here and for the past month I have been getting bluescreens on BFBC2 while playing online. I also crash now and then. I uploaded the dump so please view that and tell me why this is happening. Thank you.
BSOD Help and Support
Some bluescreens
Hello! I had fully working computer till I changed my motherboard. Before my setting was: MB: Asus P5B CPU: QuadCore Intel Core 2 Quad Q9450, 2666 MHz (8 x 333) RAM: 4GB G-Skill DDR2-800 DDR2 SDRAM (5-5-5-15 @ 400 MHz) (4-4-4-10 @ 266 MHz) GPU: Ati Radeon HD6850
BSOD Help and Support
Repeated error sound and repeated entrance of letter "Q"
HI! I've been researching this issue for a while and cant find any solution. If anyone have any ideas what could be causing please let me know. I will be very thankful for any help, and sorry if there was a similar thread, I must have missed it. From time to time (maybe every 15-20 ...
BSOD Help and Support
A lot of Bluescreens
Hello everyone here at SevenForums! I've as of lately have had alot of problems with my computer.(I built it myself this February) My computer crashes(Bluescreen) when I play games such as Battlefield: Bad Company 2 and World in Conflict and I'm getting error messages when I try to update...
BSOD Help and Support
Bluescreens and even more of them...
Hello, I get many bluescreens (Windows 7 64bit). Sometimes all few minutes, sometimes just one in a couple of hours. In the beginning it were just 0x0000003b and 0x00000035. But now they get more and more (eg: USBCCGP.sys, 0x000000CE, Elanfltr.sys, 0x000000AO). I could not recognize any...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:52.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App