Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD, random time, different warning

29 Dec 2013   #1
Valmighty

Windows 7 Professional x64
 
 
BSOD, random time, different warning

Hi, i experience BSOD frequently now, about twice a week, at random time (but never when i play games, so far).

I suspected RAM since i just bought a new RAM, but i scanned the RAM with memtest86+ and it had no error.

This has become a nuisance now because my hard drive (F:, 3TB) runs very slowly now and i need to check disk it, but the last time my PC crashed into BSOD when i check disk the F after about 9 hours.

Help please, thank you.


My System SpecsSystem Spec
.
30 Dec 2013   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

All different errors, but all of them are pointing to Memory corruption. How many passes did you run memtest86+? It needs to run for 8 complete passes at least. If you havent completed 8 passes, you are suggested to do so. And a screenshot/camera snap after completing 8 passes would be good for documentation.

Also, as an attempt, you may try to update the BIOS to Version 3602 from ASUSTeK Computer Inc. -Support- Drivers and Download P8P67 PRO (REV 3.1)

Also update JMicron RAID from ftp://driver.jmicron.com.tw/SATA_Controller/Windows/ . get the latest WHQL.

Let us know the results.
___________________________________________________________________________________________
Code:
BugCheck 3B, {c000001d, fffff800034afab3, fffff88008f81da0, 0}

Probably caused by : memory_corruption

Followup: memory_corruption
-------------------------------------------------------------------------------
BugCheck 1A, {41201, fffff680009fbab0, 2c000003ce07025, fffffa80132b89d0}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+13702 )

Followup: MachineOwner
--------------------------------------------------------------------------------
BugCheck 50, {fffffa8030e13848, 1, fffff800034afaad, 2}


Could not read faulting driver name
Probably caused by : memory_corruption

Followup: memory_corruption
---------------------------------------------------------------------------------
BugCheck 109, {a3a039d8a57385cd, b3b7465ef7f05523, fffff8000342baa9, 1}

*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption

Followup: memory_corruption
---------
My System SpecsSystem Spec
30 Dec 2013   #3
Valmighty

Windows 7 Professional x64
 
 

Thanks, will redo the memtest and everything else
My System SpecsSystem Spec
.

31 Dec 2013   #4
Valmighty

Windows 7 Professional x64
 
 

I switch the new RAM into another socket. It doesnt give me any error until now (7 ongoing passes). Out of curiosity, how do you tell which one is faulty between the RAM and the motherboard (aside from trial and error)?
My System SpecsSystem Spec
31 Dec 2013   #5
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by Valmighty View Post
Out of curiosity, how do you tell which one is faulty between the RAM and the motherboard (aside from trial and error)?
No other way than trial and error.

Follow the "Part 3: If You Have Errors:" of How to Test and Diagnose RAM Issues with Memtest86+

Errors/red lines means one or more RAM is faulty. But the fault may occur due to a faulty DIMM slot, too, which is a motherboard component. Using memtest86+, you can discriminate between a faulty RAM and a faulty motherboard.

How? Say you have two RAM sticks and two DIMM slots. You obtained errors at the test with all RAM sticks installed. Now, remove all the sticks but one. Test it in all the available slots, one by one. Continue the same procedure for all the available sticks.
How to make the inference that is it a RAM issue or it is a motherboard issue? Suppose you have got the result like that:

testSlot1Slot2
RAM1ErrorError
RAM2GoodGood
It is a RAM, a bad RAM.

But if you have got a result like that:

testSlot1Slot2
RAM1ErrorGood
RAM2ErrorGood
It is a motherboard issue. The particular slot is bad.
My System SpecsSystem Spec
31 Dec 2013   #6
Valmighty

Windows 7 Professional x64
 
 

Attached is the latest test, i continued it until 10 passes. What does the 1930.5MB means? The RAM has 2GB faulty sector?

I'm now using my old RAM to the suspected DIMM. I'll update the result...
My System SpecsSystem Spec
31 Dec 2013   #7
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Do discrepancy in size, but the RAM is faulty.
My System SpecsSystem Spec
02 Jan 2014   #8
Valmighty

Windows 7 Professional x64
 
 

Thanks Arc! will RMA the RAM.
My System SpecsSystem Spec
Reply

 BSOD, random time, different warning




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD at random time
there is my debug file and i hope that it can be solve. thanks.
BSOD Help and Support
Random shutdowns. No warning. No BSOD. Passes all tests.
Specs: CPU: i7 2600k ATI 6950 x2 Muskin 8GB 2 1TB HDD 1 64GB SSD 4 250GB HDD Antec 1200 Case MSI MCII MB
General Discussion
BSOD at Random Time
First and foremost any help would be greatly appreciated. I have basically pulled my hair out here trying to fix this. For the past two weeks I keep getting a BSOD. At first it was very sporadic and now it is becoming very frequent. I get "IRQL_NOT_EQUAL_OR_LESS_" I have attempted the...
BSOD Help and Support
Random BSoD at Any Time?
Well, just as the title suggests, my computer gets the BSoD fairly often, almost once a day now. I could be getting ready to play a game, browsing the internet, or just have my computer on my desktop, go eat dinner, and see that it had a BSoD when I come back. My computer is around one month old,...
BSOD Help and Support
Random BSOD without warning Driver_IRQL_NOT_LESS_OR_EQUAL
Hello, I have this ASUS A42J laptop since march 2010. During the last two to three months, these BSOD are becoming more and more frequent, sometimes a few times in a day. Please someone help me with this problem. System Spec: ASUS A42J Windows 7 Home Premium 64 Bit (came installed)...
BSOD Help and Support
Random BSOD , from time to time , during normal daily activity!
Hello. I have been experiencing bluee screens of death in the last 9 months. Sometime , at 3-4 days it just happens , randomly. I hope you guys can help me. System specs : Intel Quad Core 2.5 GHZ 8 GB RAM ATi RADEON 5850 HD
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:10.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App