Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Bsod please help

02 Feb 2014   #41
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

The CBS Sample data already provided is enough for me to start work on

Here's the error found..
Code:
 Line 76341: 2014-01-31 14:44:31, Info                  CSI    00000311 [SR] Repairing 1 components
 Line 76342: 2014-01-31 14:44:31, Info                  CSI    00000312 [SR] Beginning Verify and Repair transaction
 Line 76343: 2014-01-31 14:45:31, Info                  CSI    00000313 [SR] Cannot repair member file [l:22{11}]"PINTLGT.IMD" of Microsoft-Windows-IME-Simplified-Chinese-TrigramDictionary, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
This is a fairly common one - I think caused by an error in the manufacturer's master image.


I'll post a fix protocol in a few minutes.


My System SpecsSystem Spec
.
02 Feb 2014   #42
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

I've uploaded a file - fgaaa.zip - to my SkyDrive at Noel's SkyDrive
Please download and save it.
Right-click on the saved file and select Extract all...
Change the target to C:\ and click on Extract
Close all windows (it would be a good idea to print these instructions!)
Now reboot to the Repair Environment - as soon as the machine restarts, start tapping F8 - this should bring up the Advanced Boot Menu, at the top of which should be the option 'Repair my Computer'
Pick that
You'll have to log in with your username and password.
Pick the option to use a Command Prompt
At the prompt type
DIR C:\fgaaa
hit the enter key - if you get a 'Not Found' error try
DIR D:\fgaaa
or
DIR E:\fgaaa

The drive letter in use when you find the folder will need to be substituted (for<drive>) into the following command...

XCOPY <drive>:\fgaaa <drive>:\windows\winsxs /y /i /s /v /h

(e.g.XCOPY P:\wfire P:\windows\winsxs /y /i /s /v /h )

run the command (it should take almost no time)and when the prompt returns, type
EXIT
and hit the Enter key to exit Command Prompt - reboot to Normal Mode Windows.
Now run SFC /SCANNOW in an Elevated Command Prompt
then reboot and upload the new (complete, compressed) CBS.log file to your reply - you'll have to copy the file to your desktop before compressing the copy for upload

[edit] My upload is a 54MB file - so it'll take some time for my slow 3G connection. If it's not there when you look, go back 15 minutes or so later and look again)
My System SpecsSystem Spec
04 Feb 2014   #43
frigasaca

Windows 7 Professional
 
 

Thanks for your help Noel I am going to do those instructions tonight as I have been too busy.

But mainly for Essenbe and Britton, I found EVGA Precision on my computer and I don't know if these settings are good are bad, considering the artifact I had when I ram Furmark.

If you can't tell by the picture, sync and auto fan settings are selected.
My System SpecsSystem Spec
.

04 Feb 2014   #44
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Those settings look OK to me, but to make sure press the reset all button at the bottom right and then apply. If you log into your account at EVGA, select download software and you should find a newer version of precision X. With it, you can set a custom fan profile that will help keep temps down which may also help with the artifacts. Also, if you haven't recently check and see if there are new drivers at Nvidia. If there are, download them to your desktop and we will tell you how to install them.
My System SpecsSystem Spec
04 Feb 2014   #45
frigasaca

Windows 7 Professional
 
 

There are no new drivers, I have the latest ones. I ran Furmark with Precision open and I turned the fan speed to 90% and there were no artifacts. I turned the fan speed back to auto with Furmark still running, and the fan speed stayed around 45%-50% with still no artifacts so you were completely right.
My System SpecsSystem Spec
04 Feb 2014   #46
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

If you are having problems with temps, click the cog wheel up top next to the minimize button and on the fan tab check the 'enable software automatic fan control' box and set your own fan profile. I set mine fairly aggressive and never have temp problems. You can click the profiles button down bottom and set it as a profile along with some of the on screen display(OSD) stuff you may want. Then when you start it up, click the profile and apply and it is all set for you. My card is very quiet so I can set an aggressive profile and never hear it. The idea is keep temps below 70 if possible, so this is my profile. Set yours however you want it.

Attachment 304964
My System SpecsSystem Spec
04 Feb 2014   #47
frigasaca

Windows 7 Professional
 
 

OK I set my fan profile pretty similar to yours. Do you have your fan speed set to auto when you have your own fan profile selected?
My System SpecsSystem Spec
04 Feb 2014   #48
frigasaca

Windows 7 Professional
 
 

Noel,

Here is the CBS.log file. I did everything exactly as you instructed.
My System SpecsSystem Spec
05 Feb 2014   #49
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Quote   Quote: Originally Posted by frigasaca View Post
OK I set my fan profile pretty similar to yours. Do you have your fan speed set to auto when you have your own fan profile selected?
No, that's what that check box was for. To give it permission to use the one you created instead of auto. But, don't worry. In the real world, you'll never see the temps you saw in Furmark. The same with any stress test. If you run Prime95 or Intel Burn Test for your CPU, you better have some good cooling and keep a close watch on temps. They will go up very high and very quick. But, in any real world application, you will never see anything close to those temps.
My System SpecsSystem Spec
05 Feb 2014   #50
frigasaca

Windows 7 Professional
 
 

OK thanks Sorry if that was a stupid question
My System SpecsSystem Spec
Reply

 Bsod please help




Thread Tools Search this Thread
Search this Thread:

Advanced Search



Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:35.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App