Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Bad Pool Error / Page Fault in non-paged area

03 Jan 2014   #11
deanlove

Windows 7 Home Premium SP1 64bit
 
 

Not installed any fonts, though weirdly nearly every font (all but five of all 243 of them) is showing a modified date of 01/01/2014 either at 00:33 or 00:46, which I think is when things started going wrong.

SFC -scannow finds nothing - Windows Resource Protection did not find any integrity violations.

But - the good news is, this fixes the BSODs in safe mode, hurrah and thank you! But... the machine still won't boot normally. And because it's not blue-screening (it just gets to "loading windows", takes about 5 seconds, then restarts) I'm not even getting any dump files for that.

Going to try start-up repair from CD again and see if it finds anything now.


My System SpecsSystem Spec
.
03 Jan 2014   #12
YoYo155

Windows 10
 
 

Good news !
That's progress ,

Follow this tutorial and select Disable Automatic Restart on System Failure that way it won't restart
right away and you can snap a picture of the error (BSOD).

Attach it to your next post.
My System SpecsSystem Spec
03 Jan 2014   #13
deanlove

Windows 7 Home Premium SP1 64bit
 
 

Okay, got the screenshot, it doesn't look hugely helpful though!
My System SpecsSystem Spec
.

03 Jan 2014   #14
YoYo155

Windows 10
 
 

Thanks .

Please cleanup your start up procedure it is a must!:

Please Remove Daemon Tools:
Quote   Quote: Originally Posted by Arc View Post
Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall Alcohol 120% at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :

  • Double click to open it.
  • Click this button only:
  • If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
Does it normally boot now?
My System SpecsSystem Spec
03 Jan 2014   #15
deanlove

Windows 7 Home Premium SP1 64bit
 
 

Removed Daemon Tools and tried a clean boot but still no joy - crashes in the same way as before.
My System SpecsSystem Spec
03 Jan 2014   #16
YoYo155

Windows 10
 
 

Hmm, can you please upload a new instance of the MSINFO32 file?

Start → Run → type MSINFO32 then hit Enter.
In MSINFO32 go to, File → Save → name it your user-name.
Once the file is saved right click it and choose Send toCompressed (zipped) folder.

Attach the file in your next post.

Also,
Attachment 300218

*Each time you try to boot normally into Windows that is.
My System SpecsSystem Spec
03 Jan 2014   #17
deanlove

Windows 7 Home Premium SP1 64bit
 
 

1 is remaining the same, 2 is varying slightly. Just did two more crashes and got 812D6 and 7A2D6 as the last five digits, the rest have stayed the same. MSINFO attached.
My System SpecsSystem Spec
03 Jan 2014   #18
YoYo155

Windows 10
 
 

OK thanks .
Let's shoot for the most obvious driver not being loaded while in Safe-Mode that being
the GPU driver.

Please navigate and change the extension of atikmpag.sys to .bak and try to reboot into Windows.
ie.

-- Before:
Code:
c:\windows\system32\drivers\atikmpag.sys
-- After:
Code:
c:\windows\system32\drivers\atikmpag.bak
My System SpecsSystem Spec
04 Jan 2014   #19
deanlove

Windows 7 Home Premium SP1 64bit
 
 

Thanks, but no luck with that.
My System SpecsSystem Spec
04 Jan 2014   #20
YoYo155

Windows 10
 
 

OK you can undo the change.
Can you think of something that changed prior to when the issue started?
New hardware / software, a power outage, you downloaded something?

You can try a restore point to before it had started.
My System SpecsSystem Spec
Reply

 BSOD Bad Pool Error / Page Fault in non-paged area




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
PAGE FAULT IN NON PAGED AREA and REGISTRY ERROR BSOD
So as the title saids i get theses errors when i log into windows. Ive had the page fault in non paged area error before i fixed it by doing chkdsk in cmd and chkdsk/f. i also reinstalled windows 7 a few days again so i don't even know what could be causing it
BSOD Help and Support
BSOD - Page fault in non-paged area
I am very clumsy with PCs, I tried browsing the forum and I found so many different variations of solutions for this problem, I just don't know what to do. I reinstalled windows 7 x64 recently and bought a new hard disk. Everything seemed fine for a while, and I bought a wireless adapter. After...
BSOD Help and Support
BSOD: Page fault in non paged area and Memory Management error.
Encountered these two bsods within 15mins of each other. Now am currently running memtest86+ with one stick. If i have no errors on either stick, does it still mean my ram is error free? Do i need a change? I've reformatted the PC just 2 months back because of these two same issues too.
BSOD Help and Support
BSOD Page fault in non paged area
I've read through previous related BSOD threads and they did not help me. Recently I've been getting more BSODs, with them occurring more often when playing video games, I do also get an occasional crash when I have multiple flash heavy tabs open in Chrome. I have run a memory check, with no...
BSOD Help and Support
BSOD ....page fault in non paged area error
BSOD ....page fault in non paged area error my system configuration is windows 7 ultimate 32 bit 3gb ram 320 gb hdd biostar g31d motherboard intel e7500 @ 2.93ghz Problem signature:
BSOD Help and Support
BSOD page fault in non paged area error
BSOD ....page fault in non paged area error my system configuration is windows 7 ultimate 32 bit 3gb ram 320 gb hdd biostar g31d motherboard intel e7500 @ 2.93ghz Problem signature:
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:42.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App