Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Error 0x0000000a caused by ntoskrnl.exe

05 Jan 2014   #11
x BlueRobot

 

DirectX shouldn't be a problem, the only problems I know potentially caused by DirectX, were related to Stop 0x119's and handling of Fence IDs, however I believe these were patched with Service Pack 1.


My System SpecsSystem Spec
.
07 Jan 2014   #12
kirbyonwarpstar

Windows 7 Home Premium SP1 x64
 
 

i dont see bsod in safe mode
My System SpecsSystem Spec
08 Jan 2014   #13
richc46

Microsoft Community Contributor Award Recipient

Windows 10, Home Clean Install
 
 

Great,
Use a clean boot, make sure there is still no BSOD. If there is no BSODs, then one by one put your software back. Check each software thoroughly to be sure it is not the cause of the BSOD. Start with the anti virus, that is the most likely candidate
Troubleshoot Application Conflicts by Performing a Clean Startup
If you get BSODs in clean boot that indicates that the problem is caused by a driver, that is essential to the operation of your computer, we will have to find out which one.
My System SpecsSystem Spec
.

Reply

 Error 0x0000000a caused by ntoskrnl.exe




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD cause by ntoskrnl.exe error 0x0000000a
Here's what I got: Crash dump directory: C:\Windows\Minidump Crash dumps are enabled on your computer. On Thu 7/17/2014 1:49:32 PM GMT your computer crashed crash dump file: C:\Windows\Minidump\071714-23462-01.dmp This was probably caused by the following module: ntoskrnl.exe...
BSOD Help and Support
BSOD error 0x0000000a - ntoskrnl.exe+f20c4
Hi, BSOD more or less once a day. the error is BSOD error 0x0000000a - ntoskrnl.exe+f20c4 Attached here all the error information. What can cause it / how to find the bad driver of hardware? Thanks a lot in advance, Satlos
BSOD Help and Support
Random BSOD , error 0x0000000a ( fltmgr.sys + ntoskrnl.exe)
Solved... :p Can be closed
BSOD Help and Support
BSOD error caused by ntoskrnl.exe,win32k.sys etc
I have HP 1000 Notebook,and i have receiving BSOD from last 20 days. Its too much annoying please help me. I have attached minidumps files.
BSOD Help and Support
BSOD error 0x1000009f caused by ntoskrnl.exe
Hi all My PC a Envy 14 2010 make has got a BSOD 2 months ago. Every time I turned on wifi or put in a LAN cable when it shuts down it gives me a BSOD caused by driver state failure. It is OEM and was pre-installed 2 years ago with the laptop.
BSOD Help and Support
My computer is starting to have BSOD, error 0x0000000a ntoskrnl.exe
Hi, Ive started to have BSOD and its constantly doing it everytime I restart and use the internet. Here is the "Minidump" folder
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:31.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App