BSOD playing Mabinogi

Page 2 of 2 FirstFirst 12

  1. Posts : 10
    Windows 7 Home Premium 64bit
    Thread Starter
       #11

    I finally managed to do the memtest. After one pass, it shows no errors, but I'm keeping it on just incase. Also, I never updated my video card. Also, I uninstalled daemon tools and pando media but I'm still getting bsods.
      My Computer


  2. Posts : 19,383
    Windows 10 Pro x64 ; Xubuntu x64
       #12

    chaos35789 said:
    After one pass, it shows no errors, but I'm keeping it on just incase.
    Be sure to do a minimum of 8 consecutive passes - leave it running overnight.
      My Computer


  3. Posts : 10
    Windows 7 Home Premium 64bit
    Thread Starter
       #13

    After running 8 times, memtest showed no errors detected.
      My Computer


  4. Posts : 10
    Windows 7 Home Premium 64bit
    Thread Starter
       #14

    Update, I tested mabinogi on my laptop, and it worked perfectly so I believe that the problem may be only on my desktop.
      My Computer


  5. Posts : 10
    Windows 7 Home Premium 64bit
    Thread Starter
       #15

    I know this is an old thread, however, I am still experiencing this problem and would like some help D:
      My Computer


  6. Posts : 4,161
    Windows 7 Pro-x64
       #16

    Rerun the SF Utility with Grab All and post a fresh zip file. Be sure to let it capture all the files. This can take five minutes or more.
      My Computer


  7. Posts : 10
    Windows 7 Home Premium 64bit
    Thread Starter
       #17

    Oh, okay, here it is
      My Computer


  8. Posts : 4,161
    Windows 7 Pro-x64
       #18

    There's plenty of dumps but no report files. We need to see the current status of your system and logs as it stands today. The old reports may have changed. The last few dumps are processor timeouts (0x101) and a hardware fault (0x124) indicating a processor bus timeout. It looked like a pending disk failure before but if you've run the chkdsks and memtest64, indicators are pointing to a failing CPU.

    About the only suggestion I have at this point would be to try reseating the processor and apply new heat sink compound. AMD processors don't throttle on an overheat so they'll run until they go up in smoke. Another cause could be old compound coming in contact with the motherboard and/or CPU contacts. Check around CPU socket carefully. When reinstalling the CPU, make sure all the contacts look clean but do NOT touch them with your bare hands. If you're not comfortable with this maintenance, print this response and take your system to a service center.

    Code:
     
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************
    CLOCK_WATCHDOG_TIMEOUT (101)
    An expected clock interrupt was not received on a secondary processor in an
    MP system within the allocated interval. This indicates that the specified
    processor is hung and not processing interrupts.
    Arguments:
    Arg1: 0000000000000019, Clock interrupt time out interval in nominal clock ticks.
    Arg2: 0000000000000000, 0.
    Arg3: fffff88003717180, The PRCB address of the hung processor.
    Arg4: 0000000000000006, 0.
    Debugging Details:
    ------------------
     
    BUGCHECK_STR:  CLOCK_WATCHDOG_TIMEOUT_8_PROC
    CUSTOMER_CRASH_COUNT:  1
    DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
    PROCESS_NAME:  svchost.exe
    CURRENT_IRQL:  d
    STACK_TEXT:  
    fffff880`06990328 fffff800`02edda4a : 00000000`00000101 00000000`00000019 00000000`00000000 fffff880`03717180 : nt!KeBugCheckEx
    fffff880`06990330 fffff800`02e906f7 : 00000000`00000000 fffff800`00000006 00000000`00002710 00000000`00000000 : nt! ?? ::FNODOBFM::`string'+0x4e3e
    fffff880`069903c0 fffff800`03400895 : fffff800`03426460 fffff880`06990570 fffff800`03426460 00000000`00000000 : nt!KeUpdateSystemTime+0x377
    fffff880`069904c0 fffff800`02e83113 : fffff800`03001e80 00000000`00000001 00000000`00000001 fffff800`02e11000 : hal!HalpHpetClockInterrupt+0x8d
    fffff880`069904f0 fffff800`02e5b939 : fffff880`06990880 00000000`00000000 fffffa80`07490010 fffffa80`08909000 : nt!KiInterruptDispatchNoLock+0x163
    fffff880`06990680 fffff800`03191d4f : 00000000`00000000 fffff880`06990b60 00000000`00000000 fffff880`1379bcad : nt!KeFlushProcessWriteBuffers+0x65
    fffff880`069906f0 fffff800`031923ad : 00000000`03159c20 fffff800`0317ccce 00000000`00000000 fffff800`02e85cd8 : nt!ExpQuerySystemInformation+0x13af
    fffff880`06990aa0 fffff800`02e85e53 : 00000000`00000000 fffff880`06990b60 ffffffff`fffe7960 000007fe`fa7a0b00 : nt!NtQuerySystemInformation+0x4d
    fffff880`06990ae0 00000000`76f6161a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
    00000000`0378f378 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x76f6161a
     
    STACK_COMMAND:  kb
    SYMBOL_NAME:  ANALYSIS_INCONCLUSIVE
    FOLLOWUP_NAME:  MachineOwner
    MODULE_NAME: Unknown_Module
    IMAGE_NAME:  Unknown_Image
    DEBUG_FLR_IMAGE_TIMESTAMP:  0
    FAILURE_BUCKET_ID:  X64_CLOCK_WATCHDOG_TIMEOUT_8_PROC_ANALYSIS_INCONCLUSIVE
    BUCKET_ID:  X64_CLOCK_WATCHDOG_TIMEOUT_8_PROC_ANALYSIS_INCONCLUSIVE
    Followup: MachineOwner
    ---------
    0: kd> !pcr fffff88003717180
    Cannot get PRCB address
    Forgot to add the 0x124 BC

    Code:
    2: kd> !errrec fffffa8008646038
    ===============================================================================
    Common Platform Error Record @ fffffa8008646038
    -------------------------------------------------------------------------------
    Record Id     : 01cf11812702f3ca
    Severity      : Fatal (1)
    Length        : 928
    Creator       : Microsoft
    Notify Type   : Machine Check Exception
    Timestamp     : 1/14/2014 23:34:28
    Flags         : 0x00000002 PreviousError
    ===============================================================================
    Section 0     : Processor Generic
    -------------------------------------------------------------------------------
    Descriptor    @ fffffa80086460b8
    Section       @ fffffa8008646190
    Offset        : 344
    Length        : 192
    Flags         : 0x00000001 Primary
    Severity      : Fatal
    Proc. Type    : x86/x64
    Instr. Set    : x64
    Error Type    : BUS error
    Operation     : Generic
    Flags         : 0x00
    Level         : 3
    CPU Version   : 0x0000000000600f12
    Processor ID  : 0x0000000000000000
    ===============================================================================
    Section 1     : x86/x64 Processor Specific
    -------------------------------------------------------------------------------
    Descriptor    @ fffffa8008646100
    Section       @ fffffa8008646250
    Offset        : 536
    Length        : 128
    Flags         : 0x00000000
    Severity      : Fatal
    Local APIC Id : 0x0000000000000000
    CPU Id        : 12 0f 60 00 00 08 08 00 - 0b 22 98 1e ff fb 8b 17
                    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
                    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
    Proc. Info 0  @ fffffa8008646250
    ===============================================================================
    Section 2     : x86/x64 MCA
    -------------------------------------------------------------------------------
    Descriptor    @ fffffa8008646148
    Section       @ fffffa80086462d0
    Offset        : 664
    Length        : 264
    Flags         : 0x00000000
    Severity      : Fatal
    Error         : BUSLG_GENERIC_ERR_*_TIMEOUT_ERR (Proc 0 Bank 0)
      Status      : 0xb880000000020f0f
    Last edited by carwiz; 15 Feb 2014 at 16:38. Reason: Addition
      My Computer


  9. Posts : 10
    Windows 7 Home Premium 64bit
    Thread Starter
       #19

    Ok, thanks, I'll try to find a service center to get it fixed, might take a little while.
      My Computer


 
Page 2 of 2 FirstFirst 12

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 18:31.
Find Us