Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD on startup, Safe Mode works properly, 0x000000e1

07 Jan 2014   #1
dmacko

Windows 7 Premium 64 Bit
 
 
BSOD on startup, Safe Mode works properly, 0x000000e1

I am receiving the BSOD on startup consistently. Safe Mode works properly (I'm posting in it). SF file attached.

Prior to the consistent BSOD, I would receive random BSODs, mostly while gaming. Each time, I cleaned the PC, ensured all fans were operating, and monitored temperatures.

Thank you for any assistance.


My System SpecsSystem Spec
.
07 Jan 2014   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Hi dmacko.

If you are on any other place with this issue, make it sure that you will not mix the suggestions up. There is a fair chance that the two different sets of suggestions may cause a greater damage.

The BSOD dumps are not providing adequate information about the crashes. But all those are stop 0x1E. As per Carrona.org, STOP 0x0000001E: KMODE_EXCEPTION_NOT_HANDLED
Usual causes: Device driver, hardware, System service, compatibility, Remote control programs, memory, BIOS

As you are saying that Safe mode is working properly, the first suspect is any driver.Enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

information   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.

warning   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.

Tip   Tip

Let us know the results, with the subsequent crash dumps, if any.
My System SpecsSystem Spec
Reply

 BSOD on startup, Safe Mode works properly, 0x000000e1




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD on startup. Everytime, works only in safe mode
Hey Guys, I keep getting random BSOD's. Would someone be so kind to check my dump file? BCCode: 1e BCP1: FFFFFFFF80000003 BCP2: FFFFF800030CDA38 BCP3: 0000000000000002 BCP4: 0000000000000000 OS Version: 6_1_7601
BSOD Help and Support
Windows freezes 30 min after startup, works in Safe Mode
Hello everyone, I don't know if it's the good place to post my problem, because it's not a real BSOD, but it's still a freeze. So, here is the full story: A week ago, I got an update to my Avast Free Antivirus. After I installed it, my Windows began to freeze something like 30 minutes after...
BSOD Help and Support
BSOD few moments after startup, but works in safe mode.
So I posted here before about my laptop having BSOD problems whilst playing games (http://www.sevenforums.com/bsod-help-support/321102-multiple-bsods-caused-ntoskrnl-exe-apparently-when-playing-games-2.html) and with help came to the conclusion that after 5 good years of use it is simply just dying...
BSOD Help and Support
BSOD BCCode 50. freezes in normal mode, works fine in safe mode
laptop has been randomly freezing. cursor disappears no keyboard function. only thing to do is manual shutdown. Now getting a BSOD error 50. any help?
BSOD Help and Support
Windows does load, but only properly works in safe mode now
It's a new build, right from the start i noticed it would freeze periodically. Google chrome has been very slow loading pages and sometimes it will hang, being a good few few before it brings up the task manager options when i press ctrl + alt + del. Im now running it in safe mode and it runs...
Performance & Maintenance
Black Screen with Cursor on startup, Safe mode works
Firstly I'm on Win7 64. Over the last few weeks I've noticed that after starting up my laptop, and logging in just fine, the screen would go black for a couple of seconds-- my cursor would appear and I could move it around, but the screen would be black. After 10 seconds or so, the Win7 GUI would...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:25.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App