Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Driver BSODs on Windows 8 and 7

24 Jan 2014   #41
moromis

Microsoft Windows 7 Professional 32-bit 7601 Multiprocessor Free Service Pack 1
 
 

The motherboard was probably bought new from Newegg or some other computer parts store online.

As for trying different memory, I'll see what I can do.

Here's another dump: Attachment 303225


My System SpecsSystem Spec
.
25 Jan 2014   #42
Anak

Microsoft Community Contributor Award Recipient

Win 7 Home Premium 64bit Ver 6.1.7600 Build 7601 - SP1
 
 

STOP 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA

Usual causes: Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus, Device driver, NTFS corruption, BIOS

Specifically your optical drive:
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced.  This cannot be protected by try-except,
it must be protected by a Probe.  Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: d6e99543, memory referenced.
Arg2: 00000001, value 0 = read operation, 1 = write operation.
Arg3: 837eba0b, If non-zero, the instruction address which referenced the bad memory
    address.
Arg4: 00000002, (reserved)

Debugging Details:
------------------
BUGCHECK_STR:  0x50

PROCESS_NAME:  System

CURRENT_IRQL:  0

IMAGE_NAME: hardware

DEBUG_FLR_IMAGE_TIMESTAMP:  0

MODULE_NAME: hardware

FAILURE_BUCKET_ID:  IP_MISALIGNED_cdrom.sys

BUCKET_ID:  IP_MISALIGNED_cdrom.sys

Followup: MachineOwner
---------
The errors you've had all deal in one way or another with memory or incompatible hardware:
  • SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
  • IRQL_NOT_LESS_OR_EQUAL (a)
  • 0xc80003f3 error is an out of memory error
  • Bug Check 0x50: PAGE_FAULT_IN_NONPAGED_AREA
  • STOP 0x00000019: BAD_POOL_HEADER
  • STOP 0x0000008E: KERNEL_MODE_EXCEPTION_NOT_HANDLED
  • And again, STOP 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA

Quote:
From your post #39:
I believe the motherboard was bought online along with the case and all other internal pieces, excluding the graphics card. I'll double check with the builder of the computer when I can.
If at all possible and it were me, I would take the machine back to the builder, is the builder a friend or someone who has a business? Explain all the errors and see if s/he can help you to get your machine running reliably.

Start with the RAM. Then if that didn't help, go over each component individually for compatibility, if they do match the Windows Compatibility Center Then one of the components could be broken. You will need to check everything from the power supply to peripherals such as the printer, display, mouse, any hubs, routers, everything.

I will still be here, but until you start checking more into the hardware side of your machine, it seems pointless to keep posting dump reports that say, basically the same thing.


Here are a few Windows, and third-party programs you can try, their self-explanatory:
Open the Hardware and Devices troubleshooter

Troubleshoot instantly with the Windows 7 System Diagnostic Report - TechRepublic
System Health / Diagnostic Report SevenForums Tutorial

PCI-Z detect unknown PCI devices

Should I Remove It? - Download

Should I Remove It? | How do I use it?
My System SpecsSystem Spec
25 Jan 2014   #43
moromis

Microsoft Windows 7 Professional 32-bit 7601 Multiprocessor Free Service Pack 1
 
 

The system's ~5-6 years old, and I built it with my dad, so we don't have the details on the exact build and parts list - where we bought them etc.

I'll work on things on my side and post if I make any progress.
My System SpecsSystem Spec
.

28 Jan 2014   #44
moromis

Microsoft Windows 7 Professional 32-bit 7601 Multiprocessor Free Service Pack 1
 
 

Swapped the memory, and it looks like that was the problem. Going on ~36 hours with no BSODs, so far so good.

Interestingly, after I swapped the memory, my computer was having severe lag problems. I downloaded CPU-Z and saw I was only getting half clock speed. I reset the CMOS (remove battery, etc.), and it went back to normal.

So all problems might be solved now? At least for a while...
My System SpecsSystem Spec
28 Jan 2014   #45
Anak

Microsoft Community Contributor Award Recipient

Win 7 Home Premium 64bit Ver 6.1.7600 Build 7601 - SP1
 
 

That is great news!

You showed good initiative with troubleshooting to notice the lag and use CPU-Z to find the problem and make adjustments. Could you list the make and model number of this "new" memory you're trying?

I'm under the impression that the OCZ2G8002GK RAM was installed when you first built your machine 5 to 6years ago and it was running fine until recently which caused you to start this thread, is that correct? If it is than something happened to upset your operating system (OS), CMOS, and RAM. Do you have surge protection?

Since we were able to straighten out your OS with A Guy, and NoelDP's help and you reset the CMOS you could try the "old" OCZ2G8002GK RAM again to see if it would be stable and not cause more BSOD's. If you get a BSOD with just changing the RAM the old RAM may be irreparably damaged even though memtest says its okay. You could try taking the RAM to a computer repair shop to have it tested if they have a dedicated RAM tester like these.

I searched for the OCZ2G8002GK in the OCZ forums
Search Results for OCZ2G8002GK settings - OCZ Forum

Here is a search of the OCZ forums using your G31M-ES2L MB:
Search Results for G31M-ES2L and OCZ2G8002GK - OCZ Forum

Both searches especially the latter with Gbyte MB's show instability with OCZ RAM. Maybe unfair because of the different MB and timeline, but this is from seven years ago:
Quote:
I really doubt there is a permanent solution for now. OCZ is still working on resolving the problem. Gigabyte mentioned to me that even though your system could boot, your OS will not be stable. I wish this is not the case.

Source: Post #14 | Problems with OCZ2G8002GK and Gigabyte DS3
If your still interested in trying to boost the performance of either the old - if it still works - or new RAM you might want to start with this: A Newbie's Guide to Overclocking Memory | Overclockers and take note of the related guides listed at the bottom of the article under Related Posts, especially #3, overclocking is too involved to discuss in this thread, although you could try in our PC Custom Builds and Overclocking - Windows 7 Help Forums.

If your serious enough you could join either the OCZ or Overclockers Forums whatever you decide either in our Custom Builds and Overclocking forum or the two above be prepared to know settings and terms of:

CPU Speed - CPU - CPU Multiplier - CPU FSB - Memory Bus - DRAM:FSB Ratio

CPU Cache
L1 Code Cache KB per core - L1 Data Cache KB per core - L2 Cache 2x 4 MB ( Type? On-Die, ASC, Full-Speed)

Memory Timings (CL-RCD-RP-RAS) - Command Rate (CR)

BIOS Properties
System BIOS Date - Video BIOS Date - DMI BIOS Version

Temperatures of:
Motherboard - CPU -CPU #1 / Core #1 - CPU #1 / Core #2 - CPU #1 / Core #3 - CPU #1 / Core #4 - GPU1: GPU - GPU2: GPU - WDC WD5000AAKS-00A7B0 - WDC WD5000AAKS-00YGA0

Cooling Fan Speeds:
CPU RPM
Chassis #1 RPM
Chassis #2 RPM

Voltage Values:
CPU Core ?
+3.3 V ?
+5 V ?
+12 V ?
+5 V Standby ?

VCORE VOLTAGE: - DRAM VOLTAGE: - NORTH BRIDGE VOLTAGE: - SOUTH BRIDGE VOLTAGE
My System SpecsSystem Spec
Reply

 Driver BSODs on Windows 8 and 7




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSODs on Youtube and Kongregate; Driver help?
For the past week or so, I've gotten BSoDs at random intervals. Most of the time, it's when I was playing games on Kongregate (Firefox, utilizing NoScript and minimal script allowances) or watching a video on Youtube. Lately, though, my computer's BSoDs have gotten far more severe, preventing me...
BSOD Help and Support
BSODs on new install of Windows; driver issue?
I recently reinstalled Windows 7 HP x64 on my home-built PC. Core i5 650 3.2GHz dual-core 2x4GB Patriot RAM Radeon 5770 1gb Corsair cx500 psu WD Blue 1TB and 640GB HDDs I'm getting BSODs every few hours, and it's starting to get annoying. I was getting BSODs on my old install as well, but it...
BSOD Help and Support
BSODs all the times (During Boot, during Windows, IRQL, Driver IRQL)
System: 7 Ultimate x64 SP1 Pentium D 2,80 GeForce 7600 GT Hi guys, I don't know what to do. Since yesterday I am encountering BSODs all the time. I did a SFC but it says some files cannot be repaired. Which ones? I dunno. The result file is somewhat uninformative. (Perhaps one of you guys...
BSOD Help and Support
Windows colors messed up after BSODs and driver updates (NVS 3100M)
Hello there, I have been having frequent BSODs with Windows 7 (32-bit) on my heavy duty work laptop (ThinkPad T510), almost always caused by the nvlddmkm.dll library. Having sought help from disabling security applications and various other resource hogs, I have not yet found a solution to my...
Graphic Cards
Possibly driver-related BSoDs
Hi I'm new here and have a nasty BSoD problem going on. I've been searching for days for threads or info to help out but nothing's quite worked out. I've so far managed to narrow it down (I THINK) to a driver in my Atheros WLAN card. A recurring theme in my BSoDs seems to be athrx.sys so I've...
BSOD Help and Support
BSODs (Probably because of driver)
Hello everyone. Since i'm posting here and as the title says, i have BSOD problems. The BSODs started while playing a game. No hardware changes. From then, in every game i played, after some time i got BSOD(not immediately, let's say after 1-2 hours or so). Also sometimes after the crash, i got...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:00.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App