Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Getting BSOD's while playing several games

09 Jan 2014   #1
Rico5924

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 
Getting BSOD's while playing several games

Help, I'm getting the BSOD of, "A Clock Interrupt has been received on a secondary processor ... " many times while playing several games in which I have sufficient system requirements to play including Team Fortress 2, Minecraft and Europa Universalis 4. I Upgraded my graphics thinking that would help but it didn't. I have an Intel(R) Core(TM) i7-2600 @3.40 GHz processor, a 16.0 GB ram and a NVIDIA GeForce ATX 650 for a graphics card.

I'm thinking that it could be something with the PSU but I'm unsure.


My System SpecsSystem Spec
.
11 Jan 2014   #2
YoYo155

Windows 10
 
 

Welcome to SF Rico5924 .

The bugchecks are all 0x101, unfortunately this bug check code doesn't contain enough
information in the minidump file be analyzed fully.

Please upload the Kernel dump file using Dropbox or Skydrive, the file is located in the Windows directory
and is usually a few hundred Megabytes in size.
Code:
C:\Windows\MEMORY.dmp

A few things to eliminate;
Test for thermals and stability:
  • Download HWinfo and post a Screenshot of the sensors window, one at idle and another while putting load on the PC using Prime95 for the CPU side and Furmark for the GPU.
    • Before running Prime95 make sure to enable Round-off checking (see 1st post under the tutorial).
    Note   Note
    It is not mandatory to run both tests simultaneously, although possible as long as the temperatures are under constant monitoring.
What is the make, model and age of your PSU?
Fill out this form and post back the result:
My System SpecsSystem Spec
16 Jan 2014   #3
Rico5924

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

I have done the thermal tests with the sensors, and the results are attached. I have no clue to what any of it means really.

Also, I calculated my Power supply requirements to be 404 W requirement with a 454W recommendation. I have a 460 W PSU that is nearly 3 years old (so I think that is the problem), although I think I may have done one of the parts in the calculator wrong, because I'm not quite sure what the 16GB ram with 2 separate sticks of said ram choice is.

Also, I have uploaded that one file as well to drop box. Hopefully it is in the post right
https://www.dropbox.com/sh/i5x54oqn0pm5j35/snCiwzXPPL
My System SpecsSystem Spec
.

17 Jan 2014   #4
YoYo155

Windows 10
 
 

Hi Rico, thanks for the file .

The screenshots I was looking for are of the sensors window and not of the summary window
which is what you hae uploaded :\ .

Attachment 302091


As for the dump file, CPU cores 4&5 were hung so they didn't flush out their call stacks which means we
can't know what was being proccessed at the time of the crash, the surrounding cores have network
and security related drivers but is not to say that those are the cause just yet.

Despite being outdated I don't want to point any fingers just yet.
Code:
lmvm bcmwl664
Browse full module list
start             end                 module name
fffff880`04e47000 fffff880`05136000   bcmwl664   (deferred)             
    Image path: \SystemRoot\system32\DRIVERS\bcmwl664.sys
    Image name: bcmwl664.sys
    Browse all global symbols  functions  data

    Timestamp:        Fri Jan 22 05:30:58 2010
Code:
lmvm k57nd60a
Browse full module list
start             end                 module name
fffff880`05143000 fffff880`051a9000   k57nd60a   (deferred)             
    Image path: \SystemRoot\system32\DRIVERS\k57nd60a.sys
    Image name: k57nd60a.sys
    Browse all global symbols  functions  data

    Timestamp:        Tue Jun 08 14:40:13 2010
Please post back with a new set of screenshots using the procedure in post #2.
My System SpecsSystem Spec
18 Jan 2014   #5
Rico5924

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Thank you for the feedback.

I have done more of those tests, and this time the sensors are photoed, like you asked.

Also, something strange happened. I was playing Europa Universalis 4 earlier today, trying to get a BSOD to happen, to get more data, and after 2 hours or so of no luck, I read your post and started up the tests immediately afterwards. Not even a minute later, a BSOD happened and when I went to see where it saves the crash dump files, it wasn't there! The newest one was from the 30th of Dec. (as I have not been doing too many heavy things to my computer). It was the same blue screen type as any of the other times, " A clock interrupt has not ... "

Is that normal or not, or do I have to restart my computer twice to retrieve the file for some reason.
My System SpecsSystem Spec
19 Jan 2014   #6
YoYo155

Windows 10
 
 

Thanks for the update .

The main Voltages values displayed are a bit on the low side,
I will ask some of our hardware experts to take a look.

Attachment 302346
My System SpecsSystem Spec
19 Jan 2014   #7
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

Your power supply should be very close to these with a light load. More system specs are needed.

+3.3V--- 3.296 V
+5V ---- 4.896 V
+12V --- 11.598 V

You can verify you voltage reading using this little free program. You can also use it to complete your specs.

http://www.piriform.com/speccy
By Brink
System Info - See Your System Specs

By Kari

Speccy - Publish Snapshot of your System Specs
My System SpecsSystem Spec
19 Jan 2014   #8
Rico5924

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

http://speccy.piriform.com/results/n...wrIHQXMaoUotXd

System specs are updated, maybe they'll help.
My System SpecsSystem Spec
19 Jan 2014   #9
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Rico5924, Inyour system specs I didn't see the Brand, model and wattage of your PSU. I have always had trouble with HWinfo reading my voltage correct. Go into bios and give us the values for the +12V, +5V and +3.3V. ATX specifications are +/- 5%. If your +12V was at 10V, I doubt your computer would boot. I suspect the software is not reading it right.
My System SpecsSystem Spec
20 Jan 2014   #10
Rico5924

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

My PSU is a 460 W PSU for the XPS 8300 with model number: 7P3WV. I do not know where in BIOS to look for that info.
My System SpecsSystem Spec
Reply

 Getting BSOD's while playing several games




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD playing some games/recently playing FIFA World
The title speaks for itself, i have dump files listed below, and i would really like to fix this problem. Thank you in advance.
BSOD Help and Support
BSOD When playing games and playing flash player.
Hello guys. So here is my issue i dont really know how to specific it further then this still hope it will help. I have been getting BSOD for a while now and it's getting to the point i cant do a single thing on the computer. I did the config for dumps and so on and ended up with this RAR file...
BSOD Help and Support
BSOD whilst playing various games. Also happens when not playing games
Hello all, I've been having a few problems with my laptop since I bought it. The problem mainly occurs when I'm playing a game (usually xcom: enemy unknown or deus ex HR at the moment) but has occurred when I'm browsing the internet (albeit far less often). The BSODs appear to be random but I'm...
BSOD Help and Support
BSOD downloading games/playing games/using internet 0x00000007F
I just updated and rebuilt my PC and have reinstalled Win 7 64 bit and am constantly getting a BSOD while using the PC. Specifically while downloading/installing/playing games. I have also had the error occur just while surfing the internet. From the program Blue Screen Viewer it seems to...
BSOD Help and Support
BSOD randomly after playing games or playing movies )
Hi Guys, I have issues with my desktop. I randomly get the bsod (kernel data inpage error). I thought it started after I installes the new ATI drivers. So I tried older drivers but without any result. After that I thought it was an issues with Win 7 64bit. So I installed 32bit. But still I get...
BSOD Help and Support
BSOD Playing various games, closing games, no overheating.
Hello, first time poster looking for help as I can't diagnose my issue after trying numerous things. Currently when I play a game the BSOD happens randomly, I can go a whole day without it, or it can happen frequently. It happens the most when I close or exit a game, then it'll kick to a blue...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:08.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App