Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD - STOP: 0x0000006B - Won't boot in safe mode or from USB

11 Jan 2014   #11
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Can you boot from an installation DVD?


My System SpecsSystem Spec
.
11 Jan 2014   #12
AGuyInNeed

Windows 7 Professional x64
 
 

I found this thread: **RESOLVED** - BSOD 0x6B Win2k8 / Win7 / Win 8 - Microsoft Community

I can't seem to figure out how to create an ISO or FLP image for just the two files and place them on a USB. Can someone please help? I'm currently using PowerISO, but the boot cache file is too large to put on a FLP image.
My System SpecsSystem Spec
11 Jan 2014   #13
AGuyInNeed

Windows 7 Professional x64
 
 

By the way, the boot cache file I'm talking about is on another computer. I'm trying to copy it, along with the other file stated in that thread, from the non-BSOD computer and place it on the BSOD-plagued computer.
My System SpecsSystem Spec
.

11 Jan 2014   #14
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

I thought you couldn't boot from USB?
My System SpecsSystem Spec
11 Jan 2014   #15
AGuyInNeed

Windows 7 Professional x64
 
 

I can boot from a USB, but only to the splash page. After that, the BSOD pops up. According to the thread, I can go through the Command Prompt to apply this "fix".

STEPS according to thread above:

Copy "Bootcat.cache" file from "C:\Windows\system32\CodeIntegrity" and "NTDLL.DLL" file from "System32" folder from a SIMILAR WORKING SERVER WITH SIMILAR SERVICEPACK ( Win2k8 RTM (Non SP1) / Win2k8 R2 RTM / Win2k8 R2 SP1/wIN7 ) working server and make a ISO or FLP image using any ISO / flp image creator software (like Magic ISO MagicISO - Convert BIN to ISO, Create, Edit, Burn, Extract ISO file, ISO/BIN converter/extractor/editor ).

Mount the ISO/FLP image to the BSOD server.

Reboot the server with Startup repair boot menu by pressing F8 at the startup.

Go to CMD and restore the Bootcat.cache file from the CD/Floppy mounted to "%systemroot%\system32\CodeIntegrity" folder and NTDLL.DLL to "%systemroot%\system32\" folder. (Also, do not forget to keep a copy of the file some ware on the server, so that, it can be used next time the BSOD occurs if the server rebooted by any means).

Reboot the server, press F8, and then select "Disable Driver Signature Enforcement" menu.
Server will be up now.
Upgrade the server to SP1 (if applicable). (After upgrading, once you reboot the server, you may get the BSOD again.

Follow the same steps to bring back to normal. Once the SP1 upgrade process is over, issue will fix!.)

Verify by rebooting the server.

What do you think?
My System SpecsSystem Spec
Reply

 BSOD - STOP: 0x0000006B - Won't boot in safe mode or from USB




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD after power surge STOP 0x50 Can't boot into safe mode
Hello, I am unable to get into safe mode to deliver some more data on the BSOD.. Any help on next steps? This is the error that I see. PAGE_FAULT_IN_NONPAGED_AREA STOP: 0x00000050 (0xFFFFF901C0643DCC, 0x0000000000000000, 0xFFFFF960000DCCA3, 0x0000000000000005)
BSOD Help and Support
BSOD STOP: 0X0000007E. Cant access Safe Mode
Not sure what happened here. I recently update the AHCI driver, which seemed to be fine. Computer randomly blue screened a little while after. STOP: 0X0000007E (0XFFFFFFFF80000003, 0XFFFFF88006A5F035, 0XFFFFF880037A0EC8, 0XFFFFF880037A0720) Cant get into safe mode, startup repair did...
BSOD Help and Support
Stop Code F4 trying to boot into Safe Mode
Today out of nowhere my computer decided it would not boot into Windows. I kept getting various BSOD's until I booted from my Windows CD and set it to boot into safe mode by default via command prompt. Startup repair has not fixed anything, and actually bluescreened itself a couple times (1E and...
BSOD Help and Support
0x0000006b BSOD STOP code Windows 7 will not boot.
Hi, I'm having trouble diagnosing and fixing this Stop code on my PC. PROCESS1_INITIALIZATION_FAILED 0x0000006B (0xFFFFFFFFC0000020,0x0000000000000003, 0x000000000000000, 0x000000000000000) I was running Windows 7 Home Premium 64bit from an early 64GB Kingston SSD. This error has...
BSOD Help and Support
BSOD booting into full mode, safe mode works stop error 0x0000003b
I have been getting BSOD errors whenever booting into regular mode. Safe mode is fine (I have tweaked the registry so I have sound in safe mode) My system specs are in my profile, but used Winaudit for full specs. The winaudit report in formatted text is too big for an attachment. I have 2...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:08.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App