0xf4 randomly appearing.

Welcome to the forum.

Code:

Model	Corsair Force 3 SSD ATA Device
Model	Corsair Force GS ATA Device

Follow:

writhziden said:

If you have an SSD, make sure the following are up to date:

• SSD firmware
• BIOS Version
• Chipset Drivers
• Hard disk controller drivers/SATA drivers
• If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.

Run Disk Check on your Hard Drive(s): Disk Check

Reduce items at start-up: Startup Programs - Change

Perform a clean boot: Troubleshoot Application Conflicts by Performing a Clean Startup

Code:

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.17273.amd64fre.win7_gdr.130318-1532
Machine Name:
Kernel base = 0xfffff800`03066000 PsLoadedModuleList = 0xfffff800`032a2e70
Debug session time: Sat Jan 18 08:08:18.064 2014 (UTC + 6:00)
System Uptime: 0 days 0:00:10.032
Loading Kernel Symbols
...............................................................
................................................................
....
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff8a00110d000, 0, fffff88006115b31, 0}

*** WARNING: Unable to verify timestamp for RzSynapse.sys
*** ERROR: Module load completed but symbols could not be loaded for RzSynapse.sys

Could not read faulting driver name
Probably caused by : RzSynapse.sys ( RzSynapse+9b31 )

Followup: MachineOwner
---------

3: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced.  This cannot be protected by try-except,
it must be protected by a Probe.  Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffff8a00110d000, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff88006115b31, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000000, (reserved)

Debugging Details:
------------------


Could not read faulting driver name

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff8000330d0e0
GetUlongFromAddress: unable to read from fffff8000330d198
 fffff8a00110d000 Paged pool

FAULTING_IP: 
RzSynapse+9b31
fffff880`06115b31 0fb74220        movzx   eax,word ptr [rdx+20h]

MM_INTERNAL_CODE:  0

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT

BUGCHECK_STR:  0x50

PROCESS_NAME:  System

CURRENT_IRQL:  0

TRAP_FRAME:  fffff880033a1570 -- (.trap 0xfffff880033a1570)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=ffff000005295480 rbx=0000000000000000 rcx=0000057ff29115d8
rdx=fffff8a00110cfe0 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88006115b31 rsp=fffff880033a1700 rbp=0000000000000048
 r8=0000000000000000  r9=0000000000000040 r10=fffff80003066000
r11=0000000000000360 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei ng nz na pe nc
RzSynapse+0x9b31:
fffff880`06115b31 0fb74220        movzx   eax,word ptr [rdx+20h] ds:fffff8a0`0110d000=????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80003155694 to fffff800030d5880

STACK_COMMAND:  kb

FOLLOWUP_IP: 
RzSynapse+9b31
fffff880`06115b31 0fb74220        movzx   eax,word ptr [rdx+20h]

SYMBOL_STACK_INDEX:  3

SYMBOL_NAME:  RzSynapse+9b31

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: RzSynapse

IMAGE_NAME:  RzSynapse.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  4e941b13

FAILURE_BUCKET_ID:  X64_0x50_RzSynapse+9b31

BUCKET_ID:  X64_0x50_RzSynapse+9b31

Followup: MachineOwner
---------

3: kd> lmvm RzSynapse
start             end                 module name
fffff880`0610c000 fffff880`0613b000   RzSynapse T (no symbols)           
    Loaded symbol image file: RzSynapse.sys
    Image path: \SystemRoot\system32\DRIVERS\RzSynapse.sys
    Image name: RzSynapse.sys
    Timestamp:        Tue Oct 11 16:31:47 2011 (4E941B13)
    CheckSum:         0002C4DC
    ImageSize:        0002F000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Update the drivers below:

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable!:-

Driver Reference Table - RzSynapse.sys
Razer Synapse Engine/Razer Naga

Perform a clean install of a driver following: How to Clean Left Over Driver Files with Driver Sweeper

Install all windows updates including Service Pack One: Learn how to install Windows 7 Service Pack 1 (SP1)

Run a System file check (SFC): SFC /SCANNOW Command - System File Checker

Scan with Kaspersky TDSSKiller:Anti-rootkit utility TDSSKiller

ESET online scanner: Free Online Virus Scanner | ESET

Keep us posted.

Thanks for the updates.

Keep us posted :)