Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD - BCCode: 7a

24 Jan 2014   #11
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Did you check the alignment?


My System SpecsSystem Spec
.
24 Jan 2014   #12
bluedoorsoftwar

Win 7 Pro 32bit
 
 

Hi Golden - alignment? How? I just pressed the SSD until it felt seated on both connections.
My System SpecsSystem Spec
24 Jan 2014   #13
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 7A, {c0460918, c000000e, 1c537be0, 8c123000}

Probably caused by : memory_corruption ( nt!MiWaitForInPageComplete+302 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

KERNEL_DATA_INPAGE_ERROR (7a)
The requested page of kernel data could not be read in.  Typically caused by
a bad block in the paging file or disk controller error. Also see
KERNEL_STACK_INPAGE_ERROR.
If the error status is 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
it means the disk subsystem has experienced a failure.
If the error status is 0xC000009A, then it means the request failed because
a filesystem failed to make forward progress.
Arguments:
Arg1: c0460918, lock type that was held (value 1,2,3, or PTE address)
Arg2: c000000e, error status (normally i/o status code)
Arg3: 1c537be0, current process (virtual address for lock type 3, or PTE)
Arg4: 8c123000, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)

Debugging Details:
------------------


ERROR_CODE: (NTSTATUS) 0xc000000e - A device which does not exist was specified.

DISK_HARDWARE_ERROR: There was error with disk hardware

BUGCHECK_STR:  0x7a_c000000e

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT

PROCESS_NAME:  System

CURRENT_IRQL:  0

ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre

LAST_CONTROL_TRANSFER:  from 82cf5187 to 82d30bfc
Same issue. Unless someone has another suggestion, I'd say there is a significant hardware? issue with this SSD that cannot be solved.
My System SpecsSystem Spec
.

24 Jan 2014   #14
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Quote   Quote: Originally Posted by bluedoorsoftwar View Post
Hi Golden - alignment? How? I just pressed the SSD until it felt seated on both connections.
Step 7 ONLY : SSD - Fix Misalignment
My System SpecsSystem Spec
24 Jan 2014   #15
bluedoorsoftwar

Win 7 Pro 32bit
 
 

Hi - here is the alignment result, attached.

Is this SSD finished? Should I go back to crucial with this thread and ask for a replacement?
My System SpecsSystem Spec
24 Jan 2014   #16
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Alignment looks good. Sadly I don't think there is any other choice but to see if you can get a replacement
My System SpecsSystem Spec
24 Jan 2014   #17
bluedoorsoftwar

Win 7 Pro 32bit
 
 

OK, so I spoke to Crucial and this is what they said:

Hadir : I totally understand that having BSODs every half hour can be really inconvenient, but trust me it will be more inconvenient exchanging the drive only to have the same issue repeating itself.
Hadir : I understand that you've been using the drive for like a month or 2, and the BSODs can be solved by letting a feature called Active Garbage Collection run, which will clean the SSD and restore it to a healthy state, if you are still having issues afterwards we will certainly exchange it for you under warranty.
Hadir : In a laptop, power on with the SSD installed and enter your system BIOS (please refer to your system manufacturer’s documentation on how to access the BIOS.) Leave the laptop in the BIOS menu for the 6-8 hours.
Following this process, like I said, your drives functionality and performance should be restored.



Is this a valid option?

Thanks!

Chris
My System SpecsSystem Spec
24 Jan 2014   #18
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Actually, I have heard of that before....its worth trying.
My System SpecsSystem Spec
24 Jan 2014   #19
bluedoorsoftwar

Win 7 Pro 32bit
 
 

Here is the detail from a crucial post. Basically, the laptop needs to be in BIOS settings to keep the disk idle:

Quote:
Crucial SSDs have a special feature called Active Garbage Collection. Active Garbage Collection is a process that helps an SSD maintain optimal performance by freeing up memory sectors that are no longer in use. Garbage collection is part of the SSD itself and thus not dependent on your computer’s operating system. Since garbage collection is part of the SSD’s firmware, it works regardless of which operating and filing systems your computer is using.
Note: Garbage collection only works when your Crucial SSD is idle, so make sure to configure your system so it doesn’t go to sleep when it’s idling. Garbage Collection takes time to do its job, but as long as it gets time to idle every now and then, your Crucial SSD will maintain its high level of performance over time.
Full article: TRIM and SSD performance: why is it important? - Crucial Community
My System SpecsSystem Spec
24 Jan 2014   #20
bluedoorsoftwar

Win 7 Pro 32bit
 
 

...not confirmed to have fixed the problem though!

UPDATE: SSD has sat idle in BIOS for 18 hours now, so restarting laptop and I'll see what the next 24h brings
My System SpecsSystem Spec
Reply

 BSOD - BCCode: 7a




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
three different BSOD during 2 nights bccode 1A and bccode 24 and D1
play computer games during day and sleeping at night. forget to windows key + L during the night so that the system doesnt get that affected by errors and programs. what do i need to do? i downloaded the sf diagnostic tool and grab all function. where do i post it?
BSOD Help and Support
BSOD:: BCCode: 116; BCCode: f4 (mostly f4)
Hard drive failed in late October, replaced with SSD. Started getting BSOD whenever doing anything graphical (flash in a web browser, or a game) in November. Tried Driver Fusion (|MG| Driver Fusion (Driver Sweeper) 1.4.0 Download) and installiing older NVIDIA drivers, this reduced the...
BSOD Help and Support
BSOD during high bandwith situations. Bccode a, bccode b1.
I've completely reinstalled my system from the ground up twice over this last weekend. Still gettin the BSOD's at least daily. Here's a zip of the latest dump. It seems to really only BS when I'm running high bandwith/ memory. I.E. videogames/teamspeak/Pandora simultaneously My system is an ...
BSOD Help and Support
Frequent/randon BSODs. once BCCode =3b, once BCCode =1e,
Frequent and randon BSODs. once BCCode =3b, once BCCode =1e, others unknown. Dell precision 380 w/ 4GB. Upgraded OS to WIN 7 Premiun Home 64 bit in June 2012 (from XP Pro). WIN 7 Premium Home Family Pack (upgrade). Using Windows Security Essentials. Have scanned frequently. Also downloaded and...
BSOD Help and Support
BSOD from new memory card, BCCode:d1 & BCCode:fc
x64 full retail around 4 year old comp The memory I use on my PC is: "Corsair TWIN2X4096-8500C5D Dominator 4GB 2 X 2GB PC2-8500 1066MHz 240-Pin DDR2 CL5 Dual Channel Desktop Memory" Wanting more memory I decided to to place: "OCZ DDR2 PC2-8500 Platinum 4GB Edition Dual Channel *EOL" ...
BSOD Help and Support
BCCode 101 BSOD
Howdy--just got my new PC and it is BSOD every 1-30 minutes... (sometimes BSOD--sometimes just freezes the screen and need to reboot) I can gaurentee it to happen if I go to facebook and play zynga poker--but it will happen randomly otherwise. The problem signature follows: Problem signature:...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:39.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App