New
#11
Hello,
Thanks for the tip Britton :) I have ran the first module in the first DIMM slot and got an error during the second pass, about to test the second module in the first DIMM slot.
EDIT: Just saw Goldens post about the cores, I'll leave it with one core for the next test.
Thanks,
Aiid0z
Last edited by Aiid0z; 24 Jan 2014 at 21:00.
Hello,
Just checked back on memtest, 9 passes with no errors. I guess this means that DIMM module #1 is faulty and I should get an RMA? Should I also run prime 95 again to confirm that the memory was the problem? (this time with only the 1 good module?)
Thanks,
Aiid0z
No its not necessary to test with Prime95 - check the remaining RAM, and RMA the faulty ones.
Hello,
Alright ill get an RMA happening soon. Thanks for the help! Really appreciate it!
Aiid0z
Hello,
I just recently recieved my new RAM and stress tested the system to find it ran perfectly for 24 hours. Just thought id post this and give my thanks to you Golden once again. Really appreciate it.
Aiid0z.
Hello,
No worries. It's the least i could do :)
Aiid0z.