Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSODs PNF_LIST_CORRUPTION and more.

29 Jan 2014   #1
Spuuse

Win7 Ultimate 64x
 
 
BSODs PNF_LIST_CORRUPTION and more.

Hello!

so i got some blue screens now. I have tried everything what i can do I have installed os again. Tested different OS and still got blue screens.
Sometimes it just blue screen while i'm just normally surfing in internet and often while im playing BF4 or AC4 sometimes while playing heartstone. PC is new. i have runned memtest just like 2 passes on both sticks and no errors. i can't keep my pc on nights because my cpu cooler makes terrible noice
All temps are okey. CPU maximum temp 65 and GPU 70
I have also checked my HDD and problems. All drivers are up to date. i think.


My System SpecsSystem Spec
.
29 Jan 2014   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Hi Spuuse.

Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to threats.
Code:
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.17273.amd64fre.win7_gdr.130318-1532
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack and Update Center - Microsoft Windows

Are you overclocking? As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings.

Uninstall the display driver in full. Then clean up any possible leftover. Then install Version 13.9 only.
It is not you only, but many a people are having issues with the latest AMD display driver.
Code:
fffff880`079b97f8  fffff880`11f31c97Unable to load image \SystemRoot\system32\DRIVERS\atikmdag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
 atikmdag+0xa0c97
-----------------------------------------------------------------------------------------------
fffff880`03e00000 fffff880`03ea0000   atikmpag T (no symbols)           
    Loaded symbol image file: atikmpag.sys
    Image path: \SystemRoot\system32\DRIVERS\atikmpag.sys
    Image name: atikmpag.sys
    Timestamp:        Sat Dec 07 01:51:45 2013 (52A231D9)
    CheckSum:         0009FEFF
    ImageSize:        000A0000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the results.
__________________________________________________________________________________________
Code:
BugCheck 109, {a3a039d8989cc672, b3b7465eeb199878, fffff80002e34ed1, 1}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+53350 )

Followup: MachineOwner
-------------------------------------------------------------------------------------------------
BugCheck 4E, {99, 80faa, 2, 87aa9}

Probably caused by : memory_corruption ( nt!MiBadShareCount+4c )

Followup: MachineOwner
-------------------------------------------------------------------------------------------------
BugCheck 1000007E, {ffffffffc0000005, fffff880045b157a, fffff880079ba598, fffff880079b9e00}

Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_SEGMENT::TrimAllProcesses+14e )

Followup: MachineOwner
---------
My System SpecsSystem Spec
29 Jan 2014   #3
Spuuse

Win7 Ultimate 64x
 
 

Thanks for answering!

Lol i thought that i was installed all updates but no And im going to install that driver what you suggested now. and i have no clocks. expect GPU is factory clocked. but if i remember right i did memtest sometime ago and had 2 errors there. i thought that was not bad thing But i will do that memtest again tonight if i can. and i have done gpu stress test and everything was okey. tempatures was something like 76 celsius.
My System SpecsSystem Spec
.

30 Jan 2014   #4
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by Spuuse View Post
but if i remember right i did memtest sometime ago and had 2 errors there. i thought that was not bad thing But i will do that memtest again tonight if i can.
No, take it seriously. Because a single error is enough to rule out the RAM as bad and failing; and with a failing RAM, the computer may BSOD anytime. No other steps will be of any good till the RAM issue will be there.
My System SpecsSystem Spec
30 Jan 2014   #5
Spuuse

Win7 Ultimate 64x
 
 

Okey. There was 20 errors in 6 passes. New memory and faulty stick... Bad thing is that i can't maybe return sticks because i ordered it from germany..
My System SpecsSystem Spec
30 Jan 2014   #6
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by Spuuse View Post
Okey. There was 20 errors in 6 passes. New memory and faulty stick... Bad thing is that i can't maybe return sticks because i ordered it from germany..
Now follow the "Part 3: If You Have Errors:" of How to Test and Diagnose RAM Issues with Memtest86+

Errors/red lines means one or more RAM is faulty. But the fault may occur due to a faulty DIMM slot, too, which is a motherboard component. Using memtest86+, you can discriminate between a faulty RAM and a faulty motherboard.

How? Say you have two RAM sticks and two DIMM slots. You obtained errors at the test with all RAM sticks installed. Now, remove all the sticks but one. Test it in all the available slots, one by one. Continue the same procedure for all the available sticks.
How to make the inference that is it a RAM issue or it is a motherboard issue? Suppose you have got the result like that:

testSlot1Slot2
RAM1ErrorError
RAM2GoodGood
It is a RAM, a bad RAM.

But if you have got a result like that:

testSlot1Slot2
RAM1ErrorGood
RAM2ErrorGood
It is a motherboard issue. The particular slot is bad.
My System SpecsSystem Spec
30 Jan 2014   #7
Spuuse

Win7 Ultimate 64x
 
 

Okey now i have tested both sticks in same slot. Stick number one no errors. Stick number two, errors. do i have to do this to all or is this enough?
My System SpecsSystem Spec
30 Jan 2014   #8
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Enough!

You know what to do now
My System SpecsSystem Spec
Reply

 BSODs PNF_LIST_CORRUPTION and more.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Please help me with my BSODs
I experience BSODs every time my laptop is plugged in. But no BSODs happen when I'm not plugged in. Please help me on what I need to do. Here are my laptop's specs: Asus K42jC-vx169 Core i5 M460 2.53GHz 2Gb Ram 320Gb HDD 1gb VRAM (Nvidia GeForce CUDA 310M) Windows 7 ultimate 64-bit
BSOD Help and Support
And Still More BSODs
Sorry in my last post I said I changed CPU when I actually meant Motherboard. After changing my motherboard and running memtest ver. 4.0 I would usually end up with 1 mil errors for every ram in every slot. Same problem happened to my last motherboard which was the same model. Whenever I run...
BSOD Help and Support
Bsods
Hello windows 7 forums, my pc is once again plagued by the dreaded bsod and I need help please. I have been encountering different random errors ranging from a bad pool header, to a memory management error and a bccode:e1 error. I have no idea on what to do to fix this. They all pop up randomly, so...
BSOD Help and Support
BSODs, lots of BSODS
Hi, The blue screen of death are coming with win32k.sys, at first then irql_not_less_or_equal. I have win7 64 bit, clean installed like 1 year or so back. The dell hardware I bought was almost 2 years back but was fully replaced, motherboard, cpu except hardrive 6 months back. It is...
BSOD Help and Support
BSODs every day... need help
Hi guys, i have a serious problem with my new config... i built it 2 weeks ago, and since then i get the BSODs almost every day. i run memtest on both RAMs, individually both were OK, but when tried to run the test on dual, the system crashed after few seconds. checkdisk showed no problems on...
BSOD Help and Support
BSODs on win 7 x64
I recently upgraded to win 7 and iv been getting random BSODs. the reason I decided to upgrade was because I started to get some BSODs on vista x64. I have a feeling it could be related to my wireless adapter (ZYXEL G202) drivers. I have attached the latest BSOD minidump files. Could somebody...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:43.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App