Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Unusual BSOD Error when plugging in Wireless Mouse Connector Stop 0x48

02 Feb 2014   #1
Richiebro72

Windows 7 64 bit
 
 
Unusual BSOD Error when plugging in Wireless Mouse Connector Stop 0x48

Today my laptop crashed when I was waiting for a game for Dota 2. While I was waiting for a game, I plugged in a Belkin Mouse connector for my Belkin wireless mouse which I have not used for some time. It didn't come on quickly the first time i inserted it so i removed the connector and put it into another usb port. Windows then said it was installing driver software then the screen went fuzzy and crashed. A blue screen appeared with The CANCEL_STATE_IN_COMPLETED_IRP bug check which has a value of 0x00000048 that came up. Apparently this bug check is rare. I have attached the dump files. I really appreciate it if you can have a look to see if it was in fact the mouse driver which completed the IRP (I/o request packet) and then attempted to cancel it, causing a crash or if the crash was caused by two drivers each trying to access the same IRP in an improper way? Any help would be greatly appreciated.


My System SpecsSystem Spec
.
03 Feb 2014   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

The BSOD took place when drvinst.exe was in operation, that means the driver was being installed.
Code:
1: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

CANCEL_STATE_IN_COMPLETED_IRP (48)
This bugcheck indicates that an I/O Request Packet (IRP) that is to be
cancelled, has a cancel routine specified in it -- meaning that the packet
is in a state in which the packet can be cancelled -- however, the packet
no longer belongs to a driver, as it has entered I/O completion.  This is
either a driver bug, or more than one driver is accessing the same packet,
which is not likely and much more difficult to find. The cancel routine
parameter will provide a clue as to which driver or stack is the culprit.
Arguments:
Arg1: fffffa8009e7a198, Pointer to the IRP
Arg2: 05351bcf08000000, Cancel routine set by the driver.
Arg3: 0000000000000000
Arg4: 0000000000000000
This issue occurs because of a race condition between a thread of the Redirected Driver Buffering SubSystem (Rdbss.sys) driver and a thread of the I/O Manager.

When this race condition occurs, an I/O request packet (IRP) is processed by a thread while another thread cancels this IRP. Therefore, the Stop error occurs.
It appears that the driver is not installed at all. The I/O operation to install the driver is cancelled by the cancel routine.

Dont put any type of load to the computer. Dont run any other programs etc. Keep the computer totally idle. Then attach the mouse. Hopefully it will configure the driver.

When the driver is configured, then you may use the mouse (plug in) anytime.

BTW, how old the mouse is?
My System SpecsSystem Spec
03 Feb 2014   #3
Richiebro72

Windows 7 64 bit
 
 

Thank you for your time and detailed explanation. I inserted the mouse connector while the computer was in idle and it runs fine. The mouse is about 4 years old. I will mark this thread as solved.
My System SpecsSystem Spec
.

04 Feb 2014   #4
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Good news
My System SpecsSystem Spec
Reply

 Unusual BSOD Error when plugging in Wireless Mouse Connector Stop 0x48




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
No Sound - Have to keep re-plugging in speaker connector
Hi, I posted some threads about this on adobe ( thought it was flash player) and firefox forums because the issue is mainly no sound on youtube videos. Adobe Community: Audio Issues - Sound stops on youtube vid after a few seconds. Please Help? ...
Sound & Audio
BSOD, mouse freezes &reboots possibly after new MS wireless KB & mouse
I am still experiencing system freezes possibly triggered by mouse movement. Still reading a lot here but asking for help. New zip attached as Whiskey7a.... grr system froze while typing here (and moved mouse) I have tried system repair sfc/scannow to no effect.... All drivers just...
BSOD Help and Support
BSOD: arthurx.sys when plugging out usb wireless adapter
Details in the third reply.
BSOD Help and Support
BSOD Plugging in USB device, error 0x3b
Hi all! So I built my own PC late last year and have had absolutely no problems with it whatsoever, until my brother plugged in his JVC HD GC-FM2 camera. This camera is supposed to be able to be plugged into any PC without issue and without the need to install software/drivers, but for me it...
BSOD Help and Support
Outlook 2010 Social Connector Mouse Issue
Hi all, New to this forum, so hoping that I am posting in the right place. Am running new Win7ux64 with office 2010 professional plus (32-bit version) (all legal and activated). I also have adobe 9 professional. Started having issues with using my mouse in outlook and word and then...
Microsoft Office


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:16.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App