New
#21
I'll do that. If it does some harm, then it does.. I'm just so tired to see blue, so I try anything what might help.
I'll let you know, what will happen.
I'll do that. If it does some harm, then it does.. I'm just so tired to see blue, so I try anything what might help.
I'll let you know, what will happen.
I think BIOS Update is ok now. No damage done, I guess! We'll see what happens when I start-up cold computer next time..
And Blue Screen again when starting up cold.. There has also appeared some CHKDSK (or something like that) when starting up the computer, I have seen it two times now.
By the way, I tell you again, no BSODs in long time when computer is running and warm..
Attached new .zip-file..
Readings are the same as earlier.
hal means Hardware Abstraction layer, an abstraction layer, implemented in software, between the physical hardware of a computer and the software that runs on that computer. Memtest finds no error there. The BIOS is up-to-date, the latest version for M4A88TD-V EVO/USB3.Code:CHKIMG_EXTENSION: !chkimg -lo 50 -db !hal 4 errors : !hal (fffff80003255a84-fffff80003255abc) fffff80003255a80 08 44 3b cf *56 0d 48 8b 84 24 b0 00 00 00 48 89 .D;.V.H..$....H. fffff80003255a90 18 eb 0b 33 d2 48 8b cb ff 15 92 65 *de ff 33 d2 ...3.H.....e..3. fffff80003255aa0 49 8b cf ff *11 87 65 fe ff 8b c7 48 8b 9c 24 90 I.....e....H..$. fffff80003255ab0 00 00 00 48 83 c4 50 41 5f 41 5e 41 *59 41 5c 5f ...H..PA_A^AYA\_ MODULE_NAME: memory_corruption IMAGE_NAME: memory_corruption FOLLOWUP_NAME: memory_corruption DEBUG_FLR_IMAGE_TIMESTAMP: 0 MEMORY_CORRUPTOR: STRIDE STACK_COMMAND: .cxr 0xfffff88003183b00 ; kb FAILURE_BUCKET_ID: X64_MEMORY_CORRUPTION_STRIDE BUCKET_ID: X64_MEMORY_CORRUPTION_STRIDE ANALYSIS_SOURCE: KM FAILURE_ID_HASH_STRING: km:x64_memory_corruption_stride FAILURE_ID_HASH: {54f6a81e-bd17-9afc-f167-0352818951c1} Followup: memory_corruption ---------
Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark
Stress test the CPU.
Hardware - Stress Test With Prime95
Replace the RAM to some other ones.
Let us see what happens there.
Hi kasotol, when you run Furmark, make sure you keep a close watch on Graphics card temps using a GPU monitoring program. If you don't have one you can use MSI Afterburner. All stress tests cause the temps to rise very quickly. The same with Prime95, watch your CPU temps closely. If either one get too high, stop the test.
Also could you download the diagnostic program for your hard drive manufacturer here Hard Drive Diagnostics Tools and Utilities (Storage) - TACKtech Corp. and run the short test and the long test.
Also look at option 2 in this tutorial and run this test SFC /SCANNOW Command - System File Checker
Arc is doing a great job and is giving you the right tests to run. If you have any questions, Arc will be glad to provide any instructions needed. Due to the fact that your dump files always point to memory corruption, I would consider running memtest86+ again. It needs to run for 8 passes all at one time. The test is the best we have, but can make mistakes. Also, make sure you run memtest86+. There are 2 tests memtest86 and memtest86+. Memtest86+ is the better test and the one we all use. Please be sure to run that one. I would also suggest you use version 4.20. It works better for me. I have had problems running the newer one even though it is a little newer and faster.
Have you tried the prime95 test?
We need to run this one too, in order to minimize the possibilities.