Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSODs

27 Mar 2014   #61
kasotol

Microsoft Windows 7 Home Premium 64-bit
 
 

Quote   Quote: Originally Posted by essenbe View Post
Also please look at option 2 of this tutorial and run sfc /scannow.
I have done this. Post #28, and in post #32 is attached file of it.
Quote   Quote: Originally Posted by kasotol View Post
Quote   Quote: Originally Posted by essenbe View Post
Also look at option 2 in this tutorial and run this test SFC /SCANNOW Command - System File Checker
Hi,

Did this test (4 times). It didn't run in English, but I try to translate what it says:
"Windows resource protection found corrupted files, but it could'nt fix some of them.
More info in CBS.Log -file windir\Logs\CBS\CBS.log. Example: C:\Windows\Logs\CBS\CBS.log
------

Quote   Quote: Originally Posted by essenbe View Post
Did you try both settings? and is it any better, worse or the same?

EDIT: try setting the Dram voltage to 1.55V. It will not hurt it at all and please tell me your setting for the CPU northbridge. It may be listed as CPU NB. Also, please save me from re reading this thread, did you run memtest86+ for a full 8 passes and were there any errors?
Yes, I tried both. Same. Still BSOD about one minute after cold startup.

Yup, memtest done for a full 8 passes, and no errors.

Is CPU northbridge in BIOS, or where?
EDIT:
Found some:
CPU/NB Frequency [Auto]
CPU & NB Voltage Mode [Offset]
CPU/NB Offset Voltage 1.250 [Auto]
NB Voltage 1.250 [Auto]
NB 1.1V Voltage 1.100 [Auto]
NB 1.8V Voltage 1.800 [Auto]
CPU/NB Load-Line Calibration [Auto]


My System SpecsSystem Spec
.
27 Mar 2014   #62
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Hello kasotol, let's try a couple of things. Download this: HWiNFO, HWiNFO32/64 - Download It's the "Download Installer" button. Run in Sensors only, scroll to the voltage readings and your RAM readings and post a snip of it, it may need two snips. We will want to see 3.3V, 5V, 12V, and Vbatt.

This is the preferred, best way to upload an image or a file to a post.

Screenshots and Files - Upload and Post in Seven Forums

Press the ALT and PrntScrn keys at the same time, this will capture only the active window to use in Paint or your preferred graphics editor.
You may also upload a photo or image you already have on your PC, as you would a file, without using the Snipping tool.

How did the Hard Drive test turn out?

Power it off, remove on RAM stick and try booting with only one installed.
My System SpecsSystem Spec
27 Mar 2014   #63
kasotol

Microsoft Windows 7 Home Premium 64-bit
 
 

Quote   Quote: Originally Posted by Britton30 View Post
Hello kasotol, let's try a couple of things. Download this: HWiNFO, HWiNFO32/64 - Download It's the "Download Installer" button. Run in Sensors only, scroll to the voltage readings and your RAM readings and post a snip of it, it may need two snips. We will want to see 3.3V, 5V, 12V, and Vbatt.
I'm not sure is there all you need but there's a print screen now.
My System SpecsSystem Spec
.

27 Mar 2014   #64
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Your voltages look good other than the 3VSB which is very high, but I don't think that will cause cold start BSODs.

If I recall you did remove the CMOS battery and reset the mobo (motherboard) to default?

Did you run the drive test, results?
Did you try booting with only one RAM installed?

I know you've done this, but run once more to get a fresh log and I'll ask someone to fix the corrupt files for you.
This may help, run the steps outlined in this tutorial, Option Two, and reboot the system:
SFC /SCANNOW Command - System File Checker

Note   Note
If after 2 runs there are still corrupt files, it won't fix it. I can ask for further help if so.


You may get this result:
Code:
Windows Resource Protection found corrupt files and successfully repaired
them. Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For
example C:\Windows\Logs\CBS\CBS.log
The system file repair changes will take effect after the next reboot.
Or a message that no integrity violations were found.
Or that Windows Resource Protection found errors it cannot repair, if so rerun the steps above.

When done, upload the entire C:\Windows\Logs\CBS\CBS.log instead of sfcdetails.txt, You will also have to add to zip file before uploading it.
My System SpecsSystem Spec
27 Mar 2014   #65
Thedoctor44

 

If you can be sure to upload the dump files.
My System SpecsSystem Spec
27 Mar 2014   #66
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

kasotol, Let's continue with what Britton30 is saying and try that. If we have no luck, think about this. We know you have corrupted system files and we also know you have not done a clean install in 3.5 years. If we can find no other problems consider a clean install. That should stop the corrupted system files and give us a clean start. We could try a repair install, but I have never had any luck with them and especially with corrupted system files.
My System SpecsSystem Spec
27 Mar 2014   #67
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Quote   Quote: Originally Posted by Thedoctor44 View Post
If you can be sure to upload the dump files.
See the first post and a couple after that.

@Steve, I've called tom982 to have a look at the corruptions.
My System SpecsSystem Spec
27 Mar 2014   #68
kasotol

Microsoft Windows 7 Home Premium 64-bit
 
 

Quote   Quote: Originally Posted by Britton30 View Post

If I recall you did remove the CMOS battery and reset the mobo (motherboard) to default?
What means remove the CMOS battery..?
I've done this: How To Clear CMOS (Reset BIOS)

Quote   Quote: Originally Posted by Britton30 View Post
Did you run the drive test, results?
I might sound stupid, but what test is that? I'm not sure. I have done so many tests.

Quote   Quote: Originally Posted by Britton30 View Post
Did you try booting with only one RAM installed?
I will try that soon.

Quote   Quote: Originally Posted by Britton30 View Post
When done, upload the entire C:\Windows\Logs\CBS\CBS.log instead of sfcdetails.txt, You will also have to add to zip file before uploading it.
Done several times again. It can't fix them. .zip-file should be in this post.

Quote   Quote: Originally Posted by essenbe View Post
We know you have corrupted system files and we also know you have not done a clean install in 3.5 years. If we can find no other problems consider a clean install. That should stop the corrupted system files and give us a clean start. We could try a repair install, but I have never had any luck with them and especially with corrupted system files.
I'm not an expert, but when I think this case with logic, I can't see those corrupted system files to be the cause of this problem. How can it effect to those files, when computer hardware's temperature is 20C or 40C. You know, if I shut down computer now, and restart it after 5 minutes, it will start normally without BSOD. But if it has time to cool down, and then start again, there will be BSOD every time. So, I'm pretty sure that something doesn't work right when it's cool. You know what I mean?

If it goes there, when there's nothing to do, should I change also the motherboard to new one?

Thanks a lot guys for helping me.
My System SpecsSystem Spec
27 Mar 2014   #69
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

The CMOS battery is the small coin-type battery in the mobo itself.

Hard drive(s)test(s):
Pick one for your HDD brand or use Seatools.
7 Free Hard Drive Testing Software Tools

You have done a good job with the testing buddy. I know there have been a lot, Steve mentioned the drive test HERE.
My System SpecsSystem Spec
27 Mar 2014   #70
kasotol

Microsoft Windows 7 Home Premium 64-bit
 
 

Quote   Quote: Originally Posted by Britton30 View Post
The CMOS battery is the small coin-type battery in the mobo itself.
Ok, I guess I haven't done anything with that CMOS battery.. Actually I've never heard about it.

Quote   Quote: Originally Posted by Britton30 View Post
Hard drive(s)test(s):
Pick one for your HDD brand or use Seatools.
7 Free Hard Drive Testing Software Tools

You have done a good job with the testing buddy. I know there have been a lot, Steve mentioned the drive test HERE.
So it's good if I download Seatools and run tests with it?
My System SpecsSystem Spec
Reply

 Random BSODs




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random BSODs during random tasks, numerous BCCodes.
For some reason, my last post here regarding this issue was deleted after ~2 days without warning or response from anyone, so here I am again now that I can view this section once more. For the past week or so now, my PC has been randomly BSODing at seemingly random times.. mostly when gaming....
BSOD Help and Support
Random BSODs with random intervals (have files from SF diagnostics)
Getting random BSODS from 5 times a week to 2 times a week to 0 times a week its really random and i hope the files can describe the issue.
BSOD Help and Support
BSODs, Random times, random error messages.
Hi all, first off, thanks for reading this. Basically, my current build is about 2-3 years old, the newest thing being my PSU (which I replaced after several issues with the GPU drivers constantly crashing, turns out it wasn't the power anyway...) For the past few weeks, I've been having...
BSOD Help and Support
Random BSODs Caused by Random Files with Differing Stop Codes
Since 16 Feb 2013 to today 22 Feb 2013 I've been getting Blue Screens; these appear to be completely random each time with different stop codes and (according to Blue Screen Veiw) are caused by different files. For example; Caused by ntkrnlpa.exe or atikmdag.exe, or ks,sys, or USBPORT.SYS, or...
BSOD Help and Support
Random BSODs during random tasks. Latest error: 0x1000007e
Hey folks. Acer AS4830TG-6808 Win7 Home Premium x64 Acer OEM Machine is less than a month old Added 4GB Ram stick (PNY, now total of 8GB) Have been getting random BSODs over the last week or so. I'm not sure of the reasoning, however I suspect it may be gaming related. Errors began while...
BSOD Help and Support
Random BSODs; Firefox 4 random crashes
I recently built a new desktop PC running a clean install of Windows 7 Ultimate 64-bit retail version (see my system specs). All hardware was purchased new, and all software installed were fresh installs. All Windows Updates were applied successfully, including SP1. I have also updated all drivers...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:24.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App