Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD playing Rust, error code 0x0000000a

15 Feb 2014   #1
luminosity

Windows 7 home premium 64 bit
 
 
BSOD playing Rust, error code 0x0000000a

I'm 90% sure it's not the ram because with just an A the end (coming from microsoft) it's ussually a software issue.



Also some things i noticed were that firefox would randomly crash like last time my ram went bad.


blue screen view results






Hardware configuration:
8gb vengeance 1600 8gb vengeance 1866
msi 970a-g46 mobo
750w seasonic mII 12 psu
120gb pny xlr8 ssd
some random mechanical drives.
amd fx 8320 stock clocks
gtx 770 stock clocks (recently installed. Had it for like a week now?)
fresh beta drivers for the 770.


Input devices:
Blue snowball
CM Storm Recon Mouse
Corsair K70
Headphones
1080p monitor


First time receiving this bsod (happened during rust not a very graphically intense game)


Download for crash dump file:
this was my dump on media fire but i'll upload the SF_DD_MM folder as a zip.


If you need more info to help me post bellow and ill answer it.




I've already run memtest 86 for a couple passes on each stick individually. I'll run it later with every stick in at the same time. I've taken out the 1866 I have for now though.




While I was playing rust I was playing on the "Good" graphics setting and I was in the middle of talking when it cut out.


Here's the advanced debug:
* * - Pastebin.com


My System SpecsSystem Spec
.
15 Feb 2014   #2
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {38, 2, 0, fffff80002aaac27}

Probably caused by : memory_corruption ( nt!MiResolveMappedFileFault+97 )

Followup: MachineOwner
---------
You need to test your RAM DIMM's/motherboard RAM slots for errors.

Run a minimum of 8 consecutive passes, preferably overnight, or until errors occur using MemTest86+.

Use this tutorial to help you use MemTest86+:
RAM - Test with Memtest86+
My System SpecsSystem Spec
15 Feb 2014   #3
luminosity

Windows 7 home premium 64 bit
 
 

It's got to be the mother board. Thanks for the reply. Time to upgrade.

Reason why I think this: I tested all of the ram dimms in one slot of the mobo for a few passes a couple times and none of them showed any error.
My System SpecsSystem Spec
.

15 Feb 2014   #4
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

A few passes is not sufficient....you require a minimum of 8 passes to adequately test the RAM DiMM fully.

I recommend running MemTest86+ overnight just to be sure.
My System SpecsSystem Spec
15 Feb 2014   #5
luminosity

Windows 7 home premium 64 bit
 
 

Quote   Quote: Originally Posted by Golden View Post
A few passes is not sufficient....you require a minimum of 8 passes to adequately test the RAM DiMM fully.

I recommend running MemTest86+ overnight just to be sure.
3 passes on each individual stick isn't sufficient? Alright I guess I'll just run it with every stick over night then.
My System SpecsSystem Spec
15 Feb 2014   #6
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

No, its not.

Start with all RAM DiMM's inserted as normal, then run MemTest86+. Its only necessary to test individual DiMM's if there are errors in the previous test.
My System SpecsSystem Spec
15 Feb 2014   #7
luminosity

Windows 7 home premium 64 bit
 
 

I'll report back with findings in the morning.
My System SpecsSystem Spec
15 Feb 2014   #8
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

My System SpecsSystem Spec
16 Feb 2014   #9
luminosity

Windows 7 home premium 64 bit
 
 

ran it for 9 hours. It only did 2 passes. It did get errors though. on pass 1 and pass 2 it got errors on test 8 but that's the only test it got errors on. It totaled in about ~150 errors. I can't remember the exact #. I did run each stick for 2 passes and they didn't show any error. So what does this mean? Should i test each stick more or?
My System SpecsSystem Spec
17 Feb 2014   #10
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

The fact that there are errors means that:
  • one or more RAM DiMM's are faulty; or
  • one or more motherboard RAM slots are faulty; or
  • both RAM Dimm's and motherboard slots are faulty

To check, you need to do this:

1. Take 1 RAM DiMM only and install it into motherboard RAM slot #1
2. Run MemTest86+ for a minimum of 8 passes
3. If it passes all tests, then it means that RAM DiMM and motherboard slot are good.
- Now insert that same RAM DiMM into motherboard slot #2, and run MemTest86+ again for a minimum of 8 passes
4. If the test in step 3 fails, then that RAM DiMM is faulty and can be discarded
5. Repeat the same tests for RAM DiMM #2
My System SpecsSystem Spec
Reply

 BSOD playing Rust, error code 0x0000000a




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD Error 0xc0000189 while playing Rust, League of Legends
Hello! I have been playing the game Rust recently, and it seems to have caused some sort of error with my PC. At first, it couldn't repair itself enough to start up. I was able to get it working again by using the "Launch with last working config" option in the advanced boot menu. It can...
BSOD Help and Support
BSOD after installing and playing Rust
Not much to say-started after I alt tabbed during game play. I am not familiar with computers but I learned that the 3b error code is graphic driver, memory issue, or antivirus issue.I imagine my dump files will reveal everything. I am willing to answer any questions to make it easier to resolve...
BSOD Help and Support
BSOD playing League of Legends, error 0x0000000a
So I've been having BSOD's for a while now and someone recommended this forum for some assistance. They usually happen when I play League of Legends, but it will sometimes occur out of the blue (no pun intended). The errors are not always the same, but I frequently see ntoskrnl.exe &...
BSOD Help and Support
BSOD help, error code 0x0000000a & 0x000000d1
Hello, i have been getting bsod lately and i got 2 of them, i didn't install anything new or was playing games before the bsod, the attachment contains all the information needed, by the .bat program from the sticky. Thank you in advance.
BSOD Help and Support
BSOD while playing and hosting, error 0x0000000a
Recently my machine has been crashing with the error 'IRQL_NOT_LESS_OR_EQUAL or 0x0000000a' while playing on and hosting a modded minecraft server. It has happened across multiple servers, with different mods so it is not an error with the server. While playing, my system will freeze, go to the...
BSOD Help and Support
Consistent BSOD minutes after logging in, error code 0x0000000A
Lately I've been getting these BSOD, and it consistently occurs between immediately and a few minutes after I log into my profile to the desktop. The desktop I use is originally a Compaq with Vista installed back in 2006 but most of the parts are since replaced; Windows 7 Ultimate x64, 4gRAM,...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:56.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App