Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Too many BSOD codes, trouble with new build.

17 Feb 2014   #1
GitRightStik

Windows 7 Home Premium 64bit
 
 
Too many BSOD codes, trouble with new build.

I did not want this.
I accidentally purchased a motherboard with integrated graphics, and the last 24 hours confirms my initial fear of purchasing one.
CPU has integrated graphics. Motherboard, same. Throw in a stand-alone graphics card and you can start to imagine the train wreck of BSOD codes I get.
Updated BIOS and updated all drivers direct from each manufacturer's site.
Able to access Safe Mode with Networking.
If I remove the Video card, I could run normal mode off the motherboard's graphics, but no DirectX 3D acceleration. Updated the CPU with a 3D driver from their site, and Windows won't work anymore unless I run Safe Mode, (with networking.)
Paging fault errors, IRQL errors, Memory Management errors, and more all show up in BSOD when I try to run off the video card in normal mode.
Tried to disable the integrated graphics on the motherboard, but all it lets me do is choose whether to boot/run off PEG or IGD. Obviously I tried both, but they only work when I run in safe mode.

BSOD Dump file attached.


My System SpecsSystem Spec
.
17 Feb 2014   #2
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common bugcheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003.  This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG.  This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG.  This will let us see why this breakpoint is
happening.
Arguments:
Arg1: ffffffffc000001d, The exception code that was not handled
Arg2: fffff88001b3b120, The address that the exception occurred at
Arg3: fffff880033c0f48, Exception Record Address
Arg4: fffff880033c07a0, Context Record Address

Debugging Details:
------------------

TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2

EXCEPTION_CODE: (NTSTATUS) 0xc000001d - {EXCEPTION}  Illegal Instruction  An attempt was made to execute an illegal instruction.

FAULTING_IP: 
aswSP+9120
fffff880`01b3b120 2f              ???

EXCEPTION_RECORD:  fffff880033c0f48 -- (.exr 0xfffff880033c0f48)
ExceptionAddress: fffff88001b3b120 (aswSP+0x0000000000009120)
   ExceptionCode: c000001d (Illegal instruction)
  ExceptionFlags: 00000000
NumberParameters: 0

CONTEXT:  fffff880033c07a0 -- (.cxr 0xfffff880033c07a0)
rax=0000000000000000 rbx=0000000000000001 rcx=fffff880033c1200
rdx=0000000000000004 rsi=fffffa8007faa800 rdi=fffff880033c1200
rip=fffff88001b3b120 rsp=fffff880033c1180 rbp=0000000000000004
 r8=fffff8a0066b8c01  r9=00000000000000b0 r10=fffff80003601000
r11=0000000000000752 r12=0000000000120001 r13=fffffa800838d000
r14=0000000000000000 r15=fffff880033c1390
iopl=0         nv up ei ng nz ac po cy
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010297
aswSP+0x9120:
fffff880`01b3b120 2f              ???
Resetting default scope

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT

BUGCHECK_STR:  0x7E

PROCESS_NAME:  System

CURRENT_IRQL:  0

ERROR_CODE: (NTSTATUS) 0xc000001d - {EXCEPTION}  Illegal Instruction  An attempt was made to execute an illegal instruction.

LAST_CONTROL_TRANSFER:  from fffffa800838d010 to fffff88001b3b120

FAILED_INSTRUCTION_ADDRESS: 
aswSP+9120
fffff880`01b3b120 2f              ???

STACK_TEXT:  
fffff880`033c1180 fffffa80`0838d010 : fffffa80`083798c0 fffff880`033c1298 fffff880`01b975ee 00000000`00000000 : aswSP+0x9120
fffff880`033c1188 fffffa80`083798c0 : fffff880`033c1298 fffff880`01b975ee 00000000`00000000 fffff880`00d9a4b7 : 0xfffffa80`0838d010
fffff880`033c1190 fffff880`033c1298 : fffff880`01b975ee 00000000`00000000 fffff880`00d9a4b7 fffff880`033c1390 : 0xfffffa80`083798c0
fffff880`033c1198 fffff880`01b975ee : 00000000`00000000 fffff880`00d9a4b7 fffff880`033c1390 fffffa80`07ed2d20 : 0xfffff880`033c1298
fffff880`033c11a0 00000000`00000000 : fffff880`00d9a4b7 fffff880`033c1390 fffffa80`07ed2d20 fffffa80`0838d010 : aswSP+0x655ee


FOLLOWUP_IP: 
aswSP+9120
fffff880`01b3b120 2f              ???

SYMBOL_STACK_INDEX:  0

SYMBOL_NAME:  aswSP+9120

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: aswSP

IMAGE_NAME:  aswSP.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  52a56cc2

STACK_COMMAND:  .cxr 0xfffff880033c07a0 ; kb

FAILURE_BUCKET_ID:  X64_0x7E_BAD_IP_aswSP+9120

BUCKET_ID:  X64_0x7E_BAD_IP_aswSP+9120

Followup: MachineOwner
---------
Avast is contributing to your BSOD's. Please remove it for testing purpose. Use Microsoft Security Essentials.

Recommended from a strict BSOD perspective, compatibility & stability compared to other security software:

Microsoft Security Essentials - Free Antivirus for Windows

Malwarebytes - Free

Good and Free system security combination.

Reduce items at start-up: Startup Programs - Change

Perform a clean boot: Troubleshoot Application Conflicts by Performing a Clean Startup

Daemon Tools/Alchohol is known to cause BSODs:
How to remove sptd.sys from system
Registry and SPTD problems | DAEMON Pro Help

Use Revo Uninstaller to uninstall stubborn software. Opt for Advance Mode while uninstalling which allows leftover registry removal:Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems

Run a System file check (SFC): SFC /SCANNOW Command - System File Checker

Scan with Kaspersky TDSSKiller:Anti-rootkit utility TDSSKiller

ESET online scanner: Free Online Virus Scanner | ESET

Run Disk Check on your Hard Drive(s): Disk Check

Check for heating issues using Speccy or HWmonitor

Upload a screen shot: Screenshots and Files - Upload and Post in Seven Forums

Keep us posted.
My System SpecsSystem Spec
17 Feb 2014   #3
GitRightStik

Windows 7 Home Premium 64bit
 
 

-Cleared more out of Startup list.
-Ran the SPTD program, it said I don't have anything for it to uninstall.
-Tried Startup Repair. Got BSOD Paging fault one time and BSOD IRQL error the other time.
-Ran Speccy and Speedfan, no heat issues. Speccy could not see my CPU or Motherboard or Video card.
-Ran ScanNow command. It found some problems but could not repair them.
-DVD drive is not compatible with new motherboard, so attempting to download Win7 ISO to thumbdrive, to try to repair installation from USB boot.
My System SpecsSystem Spec
.

17 Feb 2014   #4
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

What about Avast?
My System SpecsSystem Spec
18 Feb 2014   #5
GitRightStik

Windows 7 Home Premium 64bit
 
 

Quote   Quote: Originally Posted by koolkat77 View Post
What about Avast?
Removed Avast.
Ran Kaspersky. No issues found.
Rebooted into Safe Mode with Networking.
Now my boot freezes on classpnp.sys.
I followed suggestions and now my system won't even boot to Safe Mode. This is really growing frustrating.
My System SpecsSystem Spec
19 Feb 2014   #6
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

My System SpecsSystem Spec
27 Feb 2014   #7
GitRightStik

Windows 7 Home Premium 64bit
 
 

Started over. Wiped the hard drive. Reinstalled Win 7.
No issues.
Used MSI motherboard driver disk to install LAN.
No issues.
Installed MSI driver disk Chipset drivers.
Restart goes to BSOD.
Startup recovery fixed it.
Tried again with SVGA drivers.
Restarts to BSOD.
Startup recovery fixed it.
Works fine with terribad VGA graphics, as long as I don't install any more of the figurative offal that MSI calls drivers on their disk.
My System SpecsSystem Spec
02 Mar 2014   #8
GitRightStik

Windows 7 Home Premium 64bit
 
 

Still stuck with integrated graphics, every time I try to boot with the video card installed or with any graphics drivers installed, it BSOD's.
The CPU chipset graphics drivers and the mobo graphics drivers both cause BSOD if I add them in. This is all while still using only the integrated graphics too.
My System SpecsSystem Spec
02 Mar 2014   #9
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by GitRightStik View Post
Still stuck with integrated graphics, every time I try to boot with the video card installed or with any graphics drivers installed, it BSOD's.
The CPU chipset graphics drivers and the mobo graphics drivers both cause BSOD if I add them in. This is all while still using only the integrated graphics too.
Which chipset Graphics driver you applied there?

Your CPU is Intel(R) Pentium(R) CPU G2030 @ 3.00GHz, It is Ivy Bridge. Make it sure that you are installing the appropriate one. See the screenshot below:

Attachment 308698

Get it from here: MSI Global B75MA-E33

Then, let us see any further crash dump after applying this VGA driver, and not applying the existing GPU.
My System SpecsSystem Spec
02 Mar 2014   #10
GitRightStik

Windows 7 Home Premium 64bit
 
 

Grabbed the driver you said. 90% sure I've done that one before.
Installed the 64 bit one.
Restarted, Started Windows, just before login screen it froze then reboots. Ran system restore.
Back at ground zero.
Tried the 32bit driver, but it denied for system specifications. (of course it does not work, I'm running 64bit)
Ran Windows Update for a few more trivial things.
Installed them all, but one:
Intel Corporation - Graphics Adapter WDDM1.1, Graphics Adapter WDDM1.2, Graphics Adapter WDDM1.3 - Intel(R) HD Graphics
Tried that one, while in integrated graphics only, and it BSOD.
My System SpecsSystem Spec
Reply

 Too many BSOD codes, trouble with new build.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD New build, Random times, multiple stop codes
I have mostly a new build. The CPU, Mobo, SSD and GPU are all new. The RAM and PSU are taken from a previous build, but only a couple years old. I have had problems since I got this build together. I get random crashes or freezes. Sometimes it happens every hour, sometimes I can go a couple days...
BSOD Help and Support
New build, multiple random BSOD with various error codes
Hi all, long time reader, first time poster. I'm hoping I can get some help here. I've tried everything I've seen on other threads, but I'm still getting the BSODs at random times. I recently built this new pc, and am having trouble with random BSODs with random timing. Sometimes sitting idle,...
BSOD Help and Support
New build, been fine so far, now debug codes and no VGA signal
I usually leave my computer on whenever I leave to the store or something, then come back and everything is fine. This time, I came back and I see a red light coming from my computer; a debug code. I turn on the monitor, no signal and my monitor reverts to orange (power saving mode). The code that...
General Discussion
Sporadic BSOD on a new build, varying bug check codes
Hey everyone, I'm on a new build and I keep experiencing random BSODs. There doesn't seem to be any single event that triggers them. They've happened playing a game, exiting a game, watching a video, browsing windows, doing nothing, etc. I've tried re-seating my memory, video card, etc....
BSOD Help and Support
Fresh Build - Constant BSOD - Multiple Codes - 3b, 50, a
Hi All, After my last rig decided to stop working I decided to build a new one and start fresh. Would randomly turn off (not BSOD) and take multiple tries to turn back on My new rig is based off a PCGamer build, so I know components should work well together: OS: Windows 7 Ultimate x64...
BSOD Help and Support
Unpredictable BSODs Various error codes New Build
I recently built a new computer from scratch and put a fresh install of 7 home premium 64 bit (full retail). I've done a couple of memtest passes with nothing found. I'm out of ideas and would appreciate any help. I think it is an ssd problem, but am not sure. Intel(R) Core(TM) i5-2500K CPU @...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 00:46.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App