Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: New Build - BSOD -0x0A, 0x7f. Has occured during Netflix and BF4.

20 Feb 2014   #1
disturbed350z

Windows 7 Professional x64
 
 
New Build - BSOD -0x0A, 0x7f. Has occured during Netflix and BF4.

Attached is the SF Diagnostic Files.

The BS has come up a few times now. Built the PC last weekend.

I have re-seated all memory, processor, and video card. I also found no bent pins in the CPU slot. (Have had that issue with a "New" mobo in past builds).

I have run memtest86 for a few (3) passes and reported no errors. I have not had the chance to run it overnight yet for an extensive test.

I'm just trying to get an idea of where to look. I'll be running more passes with memtest tonight, and will update this post with any results.

Any other thoughts?

Thanks,
Mike


My System SpecsSystem Spec
.
20 Feb 2014   #2
disturbed350z

Windows 7 Professional x64
 
 

Quick Update. Happened again while in BF4. This time is was an 0x50 - Page_fault_in_nonpaged_area. Can't post the dump right now. Currently running memtest again. Two passes thus far. No errors.
My System SpecsSystem Spec
23 Feb 2014   #3
disturbed350z

Windows 7 Professional x64
 
 

Update - See attached files.

I ran memtest for 36hrs. Got through 9 passes. 32GB takes a long time to run through. I also checked each stick individually for a few passes, each in a different slot. No errors reported during any tests.

I ran prime95 for a few hours. Temps never went above 51/52c. No errors reported.

I thought I had the problem tracked down to the video card so I swapped it for a different one. Had two more BSODs after the fact. One related to my ASMedia USB3.0 host drivers. Uninstalled them and disabled those ports in my bios. Next was an NVidia driver issue. I performed a download / clean install for the second time. I also swapped the card to a different PCI-E port and am testing it again now.

My only thoughts at this point are that it is in my Mobo or my SSD. Is there anything else you can gather from the dumps?

Thanks,
Mike
My System SpecsSystem Spec
.

24 Feb 2014   #4
derekimo

Microsoft Community Contributor Award Recipient

 
 

Sounds like you've done a lot different things,

I can point out a few drivers from the dumps,

One is for the ASMedia USB3.0 that you said you uninstalled,

Code:
BugCheck D1, {ffffb8800424a978, 2, 8, ffffb8800424a978}

Unable to load image \SystemRoot\system32\DRIVERS\asmthub3.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for asmthub3.sys
*** ERROR: Module load completed but symbols could not be loaded for asmthub3.sys
Probably caused by : asmthub3.sys ( asmthub3+15e89 )
Driver Reference Table - asmthub3.sys

That was from the most recent dump. Try going to the path highlighted above and delete that driver since you uninstalled that.

The next dump is blaming your display driver,

Code:
BugCheck 3B, {c0000005, fffff88003635e42, fffff8800cd35d80, 0}

Probably caused by : nvlddmkm.sys ( nvlddmkm+232e42 )
I know you said you did a clean install of the driver, try this method,

Do a clean install of the display driver.
  • Uninstall All nvidia items in Control Panel > Programs and features
    • 3D Vision Control Driver
    • 3D Vision Driver
    • Graphics Driver
    • HD Audio Driver
    • PhysX
    • nvidia Update
    (Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
  • Now follow Drivers - Clean Left over Files after Uninstalling
  • Install the driver again. While installing, Select Custom (Advanced) install. In the next page, follow this settings:


Those two above were from the 23rd.

The next two both point to your PdaNet Broadband adapter,

Code:
BugCheck C9, {7, fffff880095f3f58, fffff98022b86ee0, 0}

Unable to load image \SystemRoot\system32\DRIVERS\pneteth.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for pneteth.sys
*** ERROR: Module load completed but symbols could not be loaded for pneteth.sys
Probably caused by : pneteth.sys ( pneteth+1f58 )

Followup: MachineOwner
---------

0: kd> lmvm pneteth
start             end                 module name
fffff880`095f2000 fffff880`095fb000   pneteth  T (no symbols)           
    Loaded symbol image file: pneteth.sys
    Image path: \SystemRoot\system32\DRIVERS\pneteth.sys
    Image name: pneteth.sys
    Timestamp:        Thu Nov 24 21:25:50 2011 (4ECF26DE)
    CheckSum:         000072F5
    ImageSize:        00009000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Driver Reference Table - pneteth.sys

You may want to update that driver, it's from 2011, or uninstall it for the time being.
My System SpecsSystem Spec
24 Feb 2014   #5
disturbed350z

Windows 7 Professional x64
 
 

Yeah the PDANet one was my own doing. I didn't have a network connection where I was so I had to use my phone as a USB tether. It would bluescreen the comp whenever I launched it as I had verifier running at the time. It's not a signed driver.

I will perform the steps you suggested and report back.

Thanks for your input,

Mike
My System SpecsSystem Spec
24 Feb 2014   #6
derekimo

Microsoft Community Contributor Award Recipient

 
 

You're welcome, let us know how it goes.
My System SpecsSystem Spec
24 Feb 2014   #7
disturbed350z

Windows 7 Professional x64
 
 

Performed steps above. Things were going good for a few hours. Then I had another Bluescreen while launching a game.

Files Attached.

Any thoughts?

Thanks,
Mike
My System SpecsSystem Spec
25 Feb 2014   #8
derekimo

Microsoft Community Contributor Award Recipient

 
 

The latest dump is pointing to DirectX,

Code:
Probably caused by : dxgmms1.sys
Driver Reference Table - dxgmms1.sys

You can try working through these steps,

Diagnosing basic problems with DirectX
My System SpecsSystem Spec
Reply

 New Build - BSOD -0x0A, 0x7f. Has occured during Netflix and BF4.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
What's causing this BSOD (0x50, 0x1a, 0x7f)?
I've experiencing the Blue Screen of Death errors recently I followed the posting steps and attached the .zip files on this thread All help will be appreciated
BSOD Help and Support
Bsod 0x7f
Things ive done. Run aida 64 stability test for 3hours same time watching series with vlc. Removed all the drives and bought new ssd.
BSOD Help and Support
BSOD Error check codes 0xa and 0x7f
Hi I'm hoping someone can with a BSOD problem that only seems to occur when using Serif MoviePlusX3. So far it has happened twice today and once last week. The first twice appear to have different causes to one this afternoon. I WAS hoping to find a solution from other peoples experiences but...
BSOD Help and Support
Recent 0x7F BSOD
Hey everyone. Believe it or not my system has only BSOD'd once before a long time ago due to a faulty hard drive, which was replaced. I updated to SP1 when it hit Windows Update and managed to be unaffected by the USB driver fiasco. Things were fine until this morning when I plugged my iPhone 4 in...
BSOD Help and Support
Dreaded BSOD (0x7f)
I've been getting these BSODs lately and I'm at a loss at what to do about this. I've ran Memtest for 3 passes and had no errors. I'm using Windows 7 x64 I've had the hardware installed in this rig from near the start of the year and bought a new HDD in April and installed Windows 7 on...
BSOD Help and Support
BSOD 0x7f
Hello, I'm continuously dropping BSOD every few minutes or so on my HP HDX 18. Below is the usual fault I'm receiving. I've received a few other codes that are listed in the attached dump files. (Attachment has files as requested in Posting Instructions thread) 0x0000007f (0000000000000008,...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 00:58.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App