Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Custom Build. Can't figure out the culprit.

05 Mar 2014   #11
Raveiyn

Windows 7 Home Premium x64 SP1
 
 

You are right, I didn't see paragraph #4 "may take 2 or 3 times". I attempted to run the sfc scan with repair disc command prompt and it said it could not start the service. Attempting to run SFC again with elevated command prompt now.

On a side note: I shut down the system last night, and when I started it this morning, it wouldn't boot until I re-started it a few times.

The message is the same that made me think the battery was bad.

"The file is possibly corrupt. The file header checksum does not match the computer checksum."


My System SpecsSystem Spec
.
05 Mar 2014   #12
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Try a manual window Update, type win up in the Start search, it should be the first result. Click Check for Updates in the Left pane.

If you still have unfixable files after SFC, we have some members who can help you fix it without a reinstall.
My System SpecsSystem Spec
05 Mar 2014   #13
Raveiyn

Windows 7 Home Premium x64 SP1
 
 

Quote   Quote: Originally Posted by Britton30 View Post
Try a manual window Update, type win up in the Start search, it should be the first result. Click Check for Updates in the Left pane.

If you still have unfixable files after SFC, we have some members who can help you fix it without a reinstall.
The only thing in my updates is the Bing Bar. I have followed Shawn's instructions and made a sfc details text which I have uploaded. I have tried to look at it and figure out which one's I need to replace from the Win 7 x64 SP1 ISO image I have, but it just looks like a wall of text to me.

Side Note: I ran the System readiness tool and then ran sfc scan again. No change.

Side Note 2: One of my friends mentioned I might be putting in the wrong drive letter when I run type the sfc command from Repair menu. After doing a bit of research, I see he could be right so I am gonna try that.

This is from About.com written by Tim Fisher.
Quote:
Depending on how your computer is setup, the Command Prompt, when used from outside of Windows, doesn't always assign drive letters in the same way that you see them from inside Windows. In other words, Windows might be at C:\Windows when you're using it, but D:\Windows from the Command Prompt in System Recovery Options. In most installations of Windows 8 and Windows 7, C: usually becomes D: and in Windows Vista, C: is usually still C:. To check for sure, look for the drive with the Users folder on it - that will be the drive Windows is installed on, unless you have multiple installations of Windows on multiple drives.
--Nope, still no go. Windows Resource Protection cannot be started.

Went back to look at the wall of text that is my SFC log. So far this is what I see can't be repaired.

NlsData000d.dll Microsoft-Windows-NaturalLanguage6, Version = 6.1.7601.17514
NlsData000a.dll
NlsData0002.dll
NlsData0001.dll
mshtml.dll Microsoft-Windows-IE-HTMLRenderingVersion = 11.2.9600.16518
My System SpecsSystem Spec
.

05 Mar 2014   #14
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

I've asked for help with the SFC files, hang tight. I've tried simply replacing corrupt files with good copies, it doesn't work. there's permission/registry issues or something that has to be done. I think.

If you can boot w7 try running SFC from an elevated cmd prompt. Upload the new sfcdetails file. May be some repetition here...

This may help, run the steps outlined in this tutorial, Option Two, and reboot the system:
SFC /SCANNOW Command - System File Checker

Note   Note
If after 2 runs there are still corrupt files, it won't fix it. I can ask for further help if so.


You may get this result:
Code:
Windows Resource Protection found corrupt files and successfully repaired
them. Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For
example C:\Windows\Logs\CBS\CBS.log
The system file repair changes will take effect after the next reboot.
Or a message that no integrity violations were found.
Or that Windows Resource Protection found errors it cannot repair, if so rerun the steps above.
My System SpecsSystem Spec
05 Mar 2014   #15
Raveiyn

Windows 7 Home Premium x64 SP1
 
 

Permission were simple enough to allow copy/replacing but it didn't remedy the problem. Followed Brink's guide.

I will wait for someone with some SFC knowledge, but I have already tried replacing the files and as you said it doesn't work even with permissions in place. I didn't do anything to the registry.

This may be my only options now besides clean install -> Brink's Repair Install Guide

Ran SFC scan twice with elevated command prompt and rebooted after each completed scan. Still can't get the SFC scan to run in repair menu command prompt.

Uploaded requested SFC text
My System SpecsSystem Spec
05 Mar 2014   #16
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Ok, I have asked NoelDP for help with this.
My System SpecsSystem Spec
05 Mar 2014   #17
Raveiyn

Windows 7 Home Premium x64 SP1
 
 

I am pretty diligent about keeping backups on a secondary hard drive. I do have a system image saved for first, second, and third day after I put the system together as well as the 2 week and 30 day mark but the 30 day one seems to be affected by this issue. I am considering loading the 3rd system image. Other than the 40 gigs of games I have, I wouldn't lose much. Will need to run the sfc scan to make sure all is good once I do this though. Unless NoelDP has any better suggestions?
My System SpecsSystem Spec
05 Mar 2014   #18
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

You can restore the image if you want. Noel creates protocols and scripts that are unique to each case. He does many other things. to do as well, here in the forums.
My System SpecsSystem Spec
05 Mar 2014   #19
Raveiyn

Windows 7 Home Premium x64 SP1
 
 

Quote   Quote: Originally Posted by Britton30 View Post
You can restore the image if you want. Noel creates protocols and scripts that are unique to each case. He does many other things. to do as well, here in the forums.
I am sure he is fantastic with what he does or you would not have asked him for help. Please let him know I appreciate any effort he put into helping me. I thank you, Arc, and LazyBear but I will just have to give up some data usage (big middle finger to Comcast) while spending this weekend downloading and installing PSP, my games, etc. Hopefully I won't do whatever the hell I did that caused the problem in the first place.

Currently, this is what I got on the scan,



SFC scan is working beautifully.
My System SpecsSystem Spec
05 Mar 2014   #20
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Look fine now. A suggestion would be to run the SFC after you add software, drivers, etc to see if one makes more corruption.

Who is "LazyBear"?
My System SpecsSystem Spec
Reply

 BSOD Custom Build. Can't figure out the culprit.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD Custom Build
So mainly while gaming I get various BSODs. Not much else to say but here are the required files and my computer and specs may be seen under my profile. Thank you in advance for taking the time to help with this.
BSOD Help and Support
BSOD on new custom build PC
Hello folks, I just built a new PC and have been having random BSOD issues since. It's a new MB, processor, RAM and main HDD (SSD), but I reused 2 hard drives from my previous PC, video card, optical drive and case from my last PC. I'm kinda thinking it might be RAM that's causing my issue but...
BSOD Help and Support
New Custom Build Please help BSOD
Am new here. And I too am suffering from random BSODs. Had faulty RAMs, and have replaced them. And still BSOD I seriously need help guys.
BSOD Help and Support
Custom Build Computer, BSOD on first day.
I just built my first (cheap) gaming computer today. However, I keep getting blue screened, and it happens very frequently. Within the last 3 hours of trying to troubleshoot this issue myself, it has blue screened on me about 12 times. I cannot be certain when/why it occurs. It's happened...
BSOD Help and Support
BSoD on Custom Build
Hello, I've been having persistent BSoD problems on a custom rig. It happens mostly when I'm away. Of the few times I have been at my computer at the time of crash, I saw no warning signs. Basic system info: Windows 7 Professional (x64) retail Fresh installation in March onto SSD...
BSOD Help and Support
BSOD on custom build
Hey folks, here's my basic info: Is Windows 7 . . . - 64 bit - original installed OS on system - student version of OS, counts as full retail (can install on multiple machines) - All components are approximately 6 months old - Reinstalled OS recently (2-3wks ago?) to see if that would fix...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:24.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App