Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD again even after restoring to a previous system image 0xC4 0x24

06 Mar 2014   #1
Raveiyn

Windows 7 Home Premium x64 SP1
 
 
BSOD again even after restoring to a previous system image 0xC4 0x24

Original Help Thread Here

I didn't want to re-open the previous BSOD thread because it is brand new errors. Either I am a complete idiot and forgot something or I have a hardware issue as this is a continued problem after restoring to a 3 day old system image on a brand new custom built PC.

I flashed the BIOS via Bios control panel and a flash drive with Bios Update after first BSOD.
http://us.msi.com/product/mb/Z87GD65....html#download Version 1.9

I have installed the stable 314.22 WHQL Nvidia driver after Who Crashed mentioning Nvidia driver.
http://www.nvidia.com/object/win8-wi...ql-driver.html

I have updated the Realtek driver.
http://us.msi.com/product/mb/Z87GD65....html#download

I have updated the Killer Ethernet drivers.
http://us.msi.com/product/mb/Z87GD65....html#download

I don't know what I am forgetting or doing wrong. This is so frustrating.


My System SpecsSystem Spec
.

09 Mar 2014   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Four BSODs. Three first.
Code:
BugCheck 44, {fffffa800bd90090, 1d7b, 0, 0}

*** WARNING: Unable to verify timestamp for MpFilter.sys
*** ERROR: Module load completed but symbols could not be loaded for MpFilter.sys
Probably caused by : luafv.sys ( luafv!LuafvGenerateFileName+6d )

Followup: MachineOwner
---------
Code:
BugCheck 1000007E, {ffffffffc0000005, fffff8800182304a, fffff880031ee358, fffff880031edbb0}

*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption

Followup: memory_corruption
---------
Code:
BugCheck 24, {1904fb, fffff8800935f218, fffff8800935ea70, fffff80002e94cde}

Probably caused by : memory_corruption

Followup: memory_corruption
---------
And three of them are all different.

Then you applied driver verifier, and got it .....
Code:
BugCheck C4, {62, fffffa800a217d38, fffffa800a213240, 1}

*** WARNING: Unable to verify timestamp for mbam.sys
*** ERROR: Module load completed but symbols could not be loaded for mbam.sys
Probably caused by : mbam.sys

Followup: MachineOwner
---------
MBAM does not cause a BSOD. And this post nullifies the possibility of a virus infection.

Now, such an all different series of BSODs can be caused by some hardware error only. RAM/CPU/GPU/PSU/MOBO.

You said you ran memtest. Though you did not say the results.

Test the other hardware .....

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Stress test the CPU.
Hardware - Stress Test With Prime95

Unfortunately I cannot test PSU and MOBO.

So let us know the results. (Expecting no issue will be obtained).
My System SpecsSystem Spec
09 Mar 2014   #3
Raveiyn

Windows 7 Home Premium x64 SP1
 
 

Thank you for the response Arc. I broke down and stayed up all night testing the RAM ... again. 12 passes this time and tested each one (I only have two thankfully). Both came back as failed. These were brand new so I guess I just got a bad set of sticks. I will be sending them back for replacement, and using the 2 gig sticks from my old machine in the meantime.

This is the 3rd time I have tested the sticks.. but I didn't think to test them individually until reading one of the seven guides a few days ago. I have gone 3 days with no problems at all. Thank you for your time and patience.
My System SpecsSystem Spec
.


09 Mar 2014   #4
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

No problem mate.

Let us know for any further issue.
My System SpecsSystem Spec
Reply

 BSOD again even after restoring to a previous system image 0xC4 0x24




Thread Tools





Similar help and support threads
Thread Forum
Managing a backup from a previous image (eg. deleting system image)
Hello, Before I re-imaged my laptop, I made sure to do a backup of personal files + a system image in case things went wrong. The imaging was successful, and now, the new Win7 OS recognizes the old backup as a backup from another computer (as it should). However, is it possible to manage...
Backup and Restore
Restoring System Image Without Reformatting
I made a system image of my hard-drive and then converted the drive to GPT from MBR. When I went to restore my image of windows, it wants to reformat the hard-drive. Won't this convert it back to MBR? Is it impossible to restore a Windows image from an MBR drive onto a GPT drive? I...
Backup and Restore
restoring system image to a new SSD
This is a follow-on from the previous question that you kindly helped me with... So far.... 1. I have a system image saved on a External USB HDD 2. I am able to boot successly with the recovery disk I downloaded. 3. Windows successfully finds the image I made 4. When I try to restore the...
Backup and Restore
Backup & Restore - Unable to Find Previous System Image
I made a System Image to an external USB drive months ago and had a system crash. I replaced the HD's and attempted a System Image Recovery by booting up using the System Recovery Disk I made and having the external USB drive connected. When the System Image Recovery tries to scan for...
Backup and Restore
Advice please on restoring Win 7 Pro from system image
Having ongoing seemingly uncorrectable problems with my Win 7 PRO 64 bit system. Prinarily...I can not get the current HP printer/scanner drivers to uninstall/unload and/or can not get the current HP drivers/program system install download to correctly install. This is the only issue and can not...
Backup and Restore
restoring from system image file
hi guys, i have problem here, need help quick I just formatted my drive (c:\) due to the attack of virus, now, since i had made a system image on drive d:\, i want to restore all the system files on drive c:\ but when i tried to restore it through windows repair , setup gave a warning that i...
Backup and Restore

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:23.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App