Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD, multiple issues - nvlddmkm.sys ntsokrnl.sys dxgmms1.sys hal.dll

14 Mar 2014   #21
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Roll back the display driver to the earlier version.
Device Manager - Roll Back Driver


My System SpecsSystem Spec
.
14 Mar 2014   #22
Ghostofdelta

Windows 7 Ultimate 64 bit
 
 

Quote   Quote: Originally Posted by Arc View Post
Roll back the display driver to the earlier version.
Device Manager - Roll Back Driver
I followed the link, and the roll back driver option is grayed out.

Wait, did you mean for the Nvidia or Intel driver?
My System SpecsSystem Spec
14 Mar 2014   #23
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Nvidia driver. Is it grayed out? Then use Display Driver Uninstaller to uninstall it and install 314.22 WHQL.
My System SpecsSystem Spec
.

14 Mar 2014   #24
Ghostofdelta

Windows 7 Ultimate 64 bit
 
 

Yes it was grayed out. Used DDU and installed the one you linked to.

Thanks for your continued help!
My System SpecsSystem Spec
15 Mar 2014   #25
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

You are welcome mate.
My System SpecsSystem Spec
15 Mar 2014   #26
Ghostofdelta

Windows 7 Ultimate 64 bit
 
 

Bsod once again. Dump uploaded
My System SpecsSystem Spec
15 Mar 2014   #27
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Display crash again.
Code:
BugCheck D1, {ffffba800f97a028, 2, 1, fffff8800432ab3d}

*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_GLOBAL::UnreferenceDmaBuffer+7d )

Followup: MachineOwner
---------
Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .

And, test your RAM modules for possible errors, too.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the results.
My System SpecsSystem Spec
16 Mar 2014   #28
Ghostofdelta

Windows 7 Ultimate 64 bit
 
 

Quote   Quote: Originally Posted by Arc View Post
Display crash again.
Code:
BugCheck D1, {ffffba800f97a028, 2, 1, fffff8800432ab3d}

*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_GLOBAL::UnreferenceDmaBuffer+7d )

Followup: MachineOwner
---------
Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .

And, test your RAM modules for possible errors, too.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the results.
Oddly enough I already use speccy (amazing for a novice like myself, no?) and used Furmark earlier (as per your advice previously in this thread) with no issues at all. Heat on all drives is well within normal range, even when stress testing the graphics card.

Currently all drives/cpu/graphics/mb is running under 40 degrees Celsius. MB and my storage drives are all 30 or just under. When playing Diablo at 2560 by 1440 at max everything the graphics card is usually just over 60 degrees at the worst.

Link to current speecy screenshot http://speccy.piriform.com/results/S...f1pD3k7dZePrYV

When I stress tested with Furmark the card got up to 89 degrees and stayed at that for over 10 minutes and was all fine, nothing weird on the screen, no bluescreen, nothing.

Used memtest previously but only for two passes. Will set it to run for 8 passes tonight. I would love for it to be a ram issue because it is so cheap to replace.
My System SpecsSystem Spec
16 Mar 2014   #29
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Speccy is a very common and very widely used program to monitor hardware performance.

Let us know about the memtest, too.
My System SpecsSystem Spec
16 Mar 2014   #30
Ghostofdelta

Windows 7 Ultimate 64 bit
 
 

Quote   Quote: Originally Posted by Arc View Post
Speccy is a very common and very widely used program to monitor hardware performance.

Let us know about the memtest, too.
Actually just realised some older information may be handy, especially since it relates to the display driver. When I last reinstalled windows there was issues flagged with the 4600 graphics from my i7-4770. I managed to fix it after a few attempts.

At the time i thought that would fix the blue screens, but they continued. They still occurred even when I had the driver disabled.

Maybe there are more issues with the cpu that haven't become apparent yet. Is there anything you would recommend to test it with?
My System SpecsSystem Spec
Reply

 BSOD, multiple issues - nvlddmkm.sys ntsokrnl.sys dxgmms1.sys hal.dll




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
nvlddmkm.sys and dxgmms1.sys bsod
Since 06/30/14 my PC is having bsod problems. I believe it happens twice in half an hour. I've tried everything, updating drivers, rebooting, everything. Everytime the error happened, I check WhoCrashed and it always tells me about nvlddmkm.sys. I searched, tried everything. I don't know if is a...
BSOD Help and Support
BSOD - nvlddmkm.sys + dxgkrnl.sys + dxgmms1.sys
Well.. yeah. I've seen many of these threads and problems about the same thing but they prolly won't help me since BSODs always have different solutions for each one (so they say). Problem: Blue screen of death on log in. How this started: It started on a wednesday or tuesday of this week,...
BSOD Help and Support
BSOD - 7 x64 nvlddmkm.sys + dxgkrnl.sys + dxgmms1.sys
A couple strange events lately, return to computer after having left it an hour or so and it seemed asleep, NO response what-so-ever, had to press reset button on the front. This has happened 3 times in a week. On reboot Windows tells me about recovering from unexpected shutdown, see at bottom....
BSOD Help and Support
BSOD, dxgmms1/nvlddmkm issues, been happening for months
Hey guys, I've been attempting to fix this myself for ages, but I've finally given up. I've got this BSOD that just appears at random. Its been happening for a while now, but I've got it narrowed down to a directX/Nvidia issue. Both are completely up to date, so I'm a little lost. Thanks in...
BSOD Help and Support
BSOD's, nvlddmkm.sys, dxgmms1.sys, sys32k.sys
Greetings and good time of the day or night. I've had multiple BSOD issues over the period of last few months, usually it was nvlddmkm.sys which I thought I solved with reinstalling nVidia drivers -> disabling some nVidia services routine. After that the errors came back, though much less...
BSOD Help and Support
BSOD dxgmms1.sys/nvlddmkm.sys/dxgkrnl.sys
My computer woes have been going on for quite some time and I'm just about to rip my hair out over this. My husband and I bought builders kits two years ago that consisted of an Asus P5Q Pro motherboard, two sticks of 2gb corsair memory, an XFX nvidia 260gtx, an Intel core2 quad Q9550@2.83GHz,...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:44.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App