Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD few moments after startup, but works in safe mode.

13 Mar 2014   #11
LewiiG

Windows 7 Home Premium x64
 
 

Quote   Quote: Originally Posted by Gandalf View Post
Check out #1 and #3 for possible fixes ...

These dmp files indicate:

1. This was probably caused by the following module: storport.sys (storport!RaidUnitCompleteRequest+0x208)
Bugcheck code: 0xA (0x238, 0x2, 0x0, 0xFFFFF800034C8C86)
description: Microsoft Storage Port Driver
Try this...
"0x000000BE" Stop error message when you use the Storport.sys driver to manage some storage devices in Windows Server 2008, in Windows Vista, in Windows 7 or in Windows Server 2008 R2

3. This was probably caused by the following module: dxgmms1.sys (dxgmms1!VidSchiInterlockedRemoveHeadListIfExist+0x2A)
Bugcheck code: 0xD1 (0x0, 0x2, 0x0, 0xFFFFF8800477F0AA)
description: DirectX Graphics MMS
Try this...
How to install the latest version of DirectX
The hotfix said something like it wasn't applicable to my machine and it seems I have the latest DirectX which is 11 for Windows 7.

Is there any hope/suggestions left for me? Maybe I'll try a fresh install of Windows 7 soon...But I have a feeling that won't work either.

Thanks.


My System SpecsSystem Spec
.
13 Mar 2014   #12
Gandalf

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

My System SpecsSystem Spec
14 Mar 2014   #13
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Hi LewiiG. Just like earlier, the crash dumps are all different, and indicating to hardware error.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Let us know the results.
My System SpecsSystem Spec
.

15 Mar 2014   #14
LewiiG

Windows 7 Home Premium x64
 
 

Quote   Quote: Originally Posted by Gandalf View Post
I'll probably try looking inside the laptop at a later date if neccessary. I've done sfc twice now with no results but will do again if needed.

Thanks.


Quote   Quote: Originally Posted by Arc View Post
Hi LewiiG. Just like earlier, the crash dumps are all different, and indicating to hardware error.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Let us know the results.
Ahh, Hi Arc and thanks again. Yeah it must be hardware now, same BSODs with clean install of Windows 7. I tested with Memtest86+ in the previous thread and got 8 passes with no errors. Would it mean anything to do it again? I will if needed. I tried to run Furmark with the sugested settings but it wouldn't let me and said:

"FurMark requires an OpenGL 2.0 compliant graphics card: NVIDIA GeForce 6 (and higher), AMD/ATI Radeon 9600 (and higher), Intel HD Graphics 2000/3000 or a S3 Graphics Chrome 400 series with the latest graphics drivers."

I suppose that means I can't do it. I'd like to be able to though, graphics seem to be the issue. Everything is fine in normal mode when I disable both display adapters (what is it using if they are both disabled?). If I try to update them or just use them the laptop will barely boot. It works in this graphically limited state but not with the latest graphics drivers, despite the fact it used to. Annoying. Would there be a hardware fix or are things like this beyond repair?
My System SpecsSystem Spec
16 Mar 2014   #15
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Yes, you cannot run Furmark. The graphics chip is:
Code:
Mobile Intel(R) 4 Series Express Chipset Family
Do memtest once again. and stress test the CPU too.
Hardware - Stress Test With Prime95

We have to test the possible hardware to minimize the possibilities.
My System SpecsSystem Spec
19 Mar 2014   #16
LewiiG

Windows 7 Home Premium x64
 
 

Quote   Quote: Originally Posted by Arc View Post
Yes, you cannot run Furmark. The graphics chip is:
Code:
Mobile Intel(R) 4 Series Express Chipset Family
Do memtest once again. and stress test the CPU too.
Hardware - Stress Test With Prime95

We have to test the possible hardware to minimize the possibilities.
Okay. Sorry for the delayed reply but there is a reason. My laptop no longer displays anything when I turn it on (it's just getting worse xD). It powers, the fan etc is heard, but nothing. No sound of Windows either. Just a black screen. I believe this might be some sort of seperate battery problem upon research, so I'll get a new one and see what happens. I did manage to run Prime95 though, for 6 hours no errors or warnings. I'll retry Memtest if I can start the laptop again. Any take on this before I get a new battery?

Thanks again.
My System SpecsSystem Spec
19 Mar 2014   #17
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

OK, let us know the situation after changing the battery.

Best of luck.
My System SpecsSystem Spec
25 Mar 2014   #18
LewiiG

Windows 7 Home Premium x64
 
 

Quote   Quote: Originally Posted by Arc View Post
OK, let us know the situation after changing the battery.

Best of luck.
Yeah thanks. But it didn't work :/ I think it's over now. Internet seems to point to a hardware problem now, motherboard or graphics card or something and won't do anything because of it. I wonder, if it was the same thing causing the BSOD but it just completely failed now instead of partially. The problem is outside of the BSOD range and can probably be solved only by me buying new parts and repairing the laptop. I don't know the exact piece of hardware though, and it's probably not worth the money right now. It's time for a new system really.


I still thank everyone here and in the other thread for the help. I now know this is the place to go for Seven support


Is there anything you'd like to add? (should I mark "solved" after?)


Thanks.
My System SpecsSystem Spec
25 Mar 2014   #19
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by LewiiG View Post
Quote   Quote: Originally Posted by Arc View Post
OK, let us know the situation after changing the battery.

Best of luck.
Yeah thanks. But it didn't work :/ I think it's over now. Internet seems to point to a hardware problem now, motherboard or graphics card or something and won't do anything because of it. I wonder, if it was the same thing causing the BSOD but it just completely failed now instead of partially. The problem is outside of the BSOD range and can probably be solved only by me buying new parts and repairing the laptop. I don't know the exact piece of hardware though, and it's probably not worth the money right now. It's time for a new system really.


I still thank everyone here and in the other thread for the help. I now know this is the place to go for Seven support


Is there anything you'd like to add? (should I mark "solved" after?)


Thanks.
I support your view.
My System SpecsSystem Spec
26 Mar 2014   #20
LewiiG

Windows 7 Home Premium x64
 
 

Quote   Quote: Originally Posted by Arc View Post
I support your view.
Okay!

Your help and advice has been amazing. Marked solved under the circumstances.

Thanks a lot for everything!
My System SpecsSystem Spec
Reply

 BSOD few moments after startup, but works in safe mode.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD only occurs in normal mode, Works fine on safe mode.
Everytime i open my pc up in normal mode, it seems to restart itself within a few seconds to a few minutes, It tends to happen when i open up a program like Chrome. I',m currently on safe mode with networking and have done registry cleaners, updated video card drivers and looked for viruses, yet...
BSOD Help and Support
BSOD on startup. Everytime, works only in safe mode
Hey Guys, I keep getting random BSOD's. Would someone be so kind to check my dump file? BCCode: 1e BCP1: FFFFFFFF80000003 BCP2: FFFFF800030CDA38 BCP3: 0000000000000002 BCP4: 0000000000000000 OS Version: 6_1_7601
BSOD Help and Support
Windows freezes 30 min after startup, works in Safe Mode
Hello everyone, I don't know if it's the good place to post my problem, because it's not a real BSOD, but it's still a freeze. So, here is the full story: A week ago, I got an update to my Avast Free Antivirus. After I installed it, my Windows began to freeze something like 30 minutes after...
BSOD Help and Support
BSOD BCCode 50. freezes in normal mode, works fine in safe mode
laptop has been randomly freezing. cursor disappears no keyboard function. only thing to do is manual shutdown. Now getting a BSOD error 50. any help?
BSOD Help and Support
BSOD on startup, Safe Mode works properly, 0x000000e1
I am receiving the BSOD on startup consistently. Safe Mode works properly (I'm posting in it). SF file attached. Prior to the consistent BSOD, I would receive random BSODs, mostly while gaming. Each time, I cleaned the PC, ensured all fans were operating, and monitored temperatures. Thank...
BSOD Help and Support
Black Screen with Cursor on startup, Safe mode works
Firstly I'm on Win7 64. Over the last few weeks I've noticed that after starting up my laptop, and logging in just fine, the screen would go black for a couple of seconds-- my cursor would appear and I could move it around, but the screen would be black. After 10 seconds or so, the Win7 GUI would...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:24.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App