Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: New Build, Multiple BSOD, Unknown error code

10 Mar 2014   #11
ddg5006

Microsoft Windows 7 64-bit 7600
 
 

The timings are showing incorrect and its listed as triple channel?


My System SpecsSystem Spec
.
11 Mar 2014   #12
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Hello ddg5006. The readings you get with 4.20 are due to it not being able to recognize Haswell CPU properly. Try again with the 5.01 but don't press any buttons, it will start in its own and should run fine.
Forcing multi-thread mode always makes it lock up during the first test.

If you notice 4.20 also lists your CPU as an i7 32nm instead of the correct i5 22nm.

To better help us to help you would you please add your systems specs? Here's the correct way to do it. :SystemInfo See Your System Specs Under System Manufacturer/Model Number add whether it is a desktop or laptop and whether self built. Very important

Log in to Seven Forums and you will be able to transfer the info directly to the specs page in your profile from within the System Info app.

Your System Specs here.

After doing this your specs will be available in each of your posts.
Click on My system Specs in the lower left of this post to see how it should look.
Full instructions are in the tutorial.
My System SpecsSystem Spec
11 Mar 2014   #13
ddg5006

Microsoft Windows 7 64-bit 7600
 
 

Well i ran the test overnight with 4.20 and it came up clean with 16 passes. Does it matter that it wasn't reading my components correctly ?
My System SpecsSystem Spec
.

11 Mar 2014   #14
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

I wouldn't trust it in your case, normally it's fine with earlier hardware.

Use the memtest86+ 5.01 version, let it start on its own, and see what results you get.
My System SpecsSystem Spec
11 Mar 2014   #15
ddg5006

Microsoft Windows 7 64-bit 7600
 
 

I thinking more and more that it's a faulty motherboard. After the ram tested clean from 4.20 (I will run ver 5 tonight) I did a clean install of windows 7. When installing the HD Graphics 4600 onboard drivers, the computer blue screened, memory management error code. What do you think ? i can upload the new dump, this is the first BSOD from the new installation of windows since this morning.
My System SpecsSystem Spec
11 Mar 2014   #16
ddg5006

Microsoft Windows 7 64-bit 7600
 
 

Damn, there is something seriously wrong here, even when i was running the diagnostic tool for upload here, it blue screened.
My System SpecsSystem Spec
11 Mar 2014   #17
ddg5006

Microsoft Windows 7 64-bit 7600
 
 

Here are the dump files
My System SpecsSystem Spec
11 Mar 2014   #18
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

I think you should install SP1 at first.

I am going to request our activation and update expert to have a look why your update is failing.
My System SpecsSystem Spec
11 Mar 2014   #19
ddg5006

Microsoft Windows 7 64-bit 7600
 
 

Quote   Quote: Originally Posted by Arc View Post
I think you should install SP1 at first.

I am going to request our activation and update expert to have a look why your update is failing.
but what are the dumps telling you ? Would installing SP1 really resolve these BSOD issues ?
My System SpecsSystem Spec
11 Mar 2014   #20
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by ddg5006 View Post
Quote   Quote: Originally Posted by Arc View Post
I think you should install SP1 at first.

I am going to request our activation and update expert to have a look why your update is failing.
but what are the dumps telling you ? Would installing SP1 really resolve these BSOD issues ?
Before installing SP1, what the dump told is meaningless.

And installing SP1 is the first step to troubleshoot your issue. Unfortunately there is no fix button. You have to go through a process.

You post a report following Windows Genuine and Activation Issue Posting Instructions
It will help to determine why SP1 is not getting installed. Later Noel will give you further steps.
My System SpecsSystem Spec
Reply

 New Build, Multiple BSOD, Unknown error code




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD playing various games, unknown error code.
I'm currently experiencing BSOD after playing a number of different games requiring large and small amounts of my PC. It happened to me a few weeks ago; then stopped for a while; and has just restarted today and can happen from any hour to every few minutes. My computer shuts down; showing a...
BSOD Help and Support
BSOD multiple times, error code unknown
Hi guys :( Sorry I do not know the error code by the time I got a pen/paper out it had disappeared. I have had multiple BSOD I have attached the minidump files (zip). The crash happened once when I was using google chrome and the other time straight after the first BSOD and the computer had...
BSOD Help and Support
BSOD - unknown error code computer restarted
Hello, Unfortunately i'm getting these BSOD errors and i'd pretty much like to know what is causing them. As per your instructions i've managed to gather the requested information in order to post them here and with your help maybe i can find out what's causing the errors. If i need to...
BSOD Help and Support
BSOD Error Code 0x07e, Unknown reason
Hi all, I was browsing the web earlier today and got a random BSOD. The first one I got was a Memory Management one, but a Crash Dump for this one does not appear in the Minidump folder. After restarting my computer, I got a second BSOD about 3 minutes after logging in, This time it was a...
BSOD Help and Support
BSOD STOP Error Code: 0x0000004e, unknown cause
I've been getting the BSOD sporadically for quite some time now and I am finally fed up. Here is the STOP error information: Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 1033 Additional information about the problem:
BSOD Help and Support
Multiple BSOD's, some Shockwave and Spyware Doctor, unknown error code
I really apologize for the vague title, all I can say about these BSOD's are that they've occurred with increasing frequently over the past week, and are seemly random. I have noticed that they happen more often whenever Shockwave crashes in Chrome and does not recover. I've also noticed that I get...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:23.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App