Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: New Build, Multiple BSOD, Unknown error code

01 Apr 2014   #71
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Man, sorry to hear that!
Can you tell if they sent the same board back to you? It's a common "trick".
I think that error shown is memory related again.

All I can suggest is to re-run all the previous tests and I'd start with memtest.


Also if you can keep it running long enough use the SFdiag tool to grab all and post that for a BSOD team member to read it.
Sorry, I though you had only attached the SFC.log.


My System SpecsSystem Spec
.
01 Apr 2014   #72
ddg5006

Microsoft Windows 7 64-bit 7600
 
 

So yea, this is insane, but I don't think they sent me the same board, 1. The online retailer is pretty reputable, so I don't think they would do that, 2. I had cut out the upc from the box of the board for a rebate before everything went to hell and they had me tape it back up, on this box its brand new, plus it was all serialized and whatnot. But, if there is a glimmer of hope in all of this, i left the test running overnight and when I came in to work in the morning, its at 13 passes and no errors as of yet. What should I make of that?

I should mention that at first, the bios that came loaded on this MB was ver 1.6, and ver 1.7 specifically lists Haswell in one of the updates in the change logs. So i updated the BIOS hoping that maybe it would resolve the problem, of course things wouldn't be that easy, it blue screened again. This time it was a little different though, it was a System Service Exception if I remember correctly. Any way, the mystery deepens right ?

Thanks again for all your help.
My System SpecsSystem Spec
01 Apr 2014   #73
ddg5006

Microsoft Windows 7 64-bit 7600
 
 

Quote   Quote: Originally Posted by Britton30 View Post
Sorry, I though you had only attached the SFC.log.
No worries
My System SpecsSystem Spec
.

01 Apr 2014   #74
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

OK, the retailer will send a new one, they don't do repairs.

I'm grasping at straws, power off and remove the little board battery for 30 seconds, replace it and try to run again with no BIOS changes.

Try running with only one RAM installed.

I've asked Arc to look at your file uploads.
My System SpecsSystem Spec
01 Apr 2014   #75
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Hi ddg5006.

Have you performed a clean install after getting the replacement board? It appears to be not, as the event logs goes to
Code:
Event[0]:
  Log Name: System
  Source: Service Control Manager
  Date: 2009-07-14T01:14:23.934
Three BSODs today ... two are stop 0x50 and one is stop 0x51. None are providing any more info ...
Code:
BugCheck 51, {12, 1, fffff8a0035b56d0, fffff8a00cafc190}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::NNGAKEGL::`string'+b798 )

Followup: MachineOwner
---------
But the STOP 0x00000051: REGISTRY_ERROR
Usual causes: Hardware failure, File system corruption, Security issues

I am not sure exactly what is going on there .......
Code:
Event[13]:
  Log Name: System
  Source: Microsoft-Windows-Kernel-General
  Date: 2009-07-14T01:14:28.146
  Event ID: 13
  Task: N/A
  Level: Information
  Opcode: Info
  Keyword: N/A
  User: N/A
  User Name: N/A
  Computer: 37L4247E29-32
  Description: 
The operating system is shutting down at system time ?2009?-?07?-?14T05:14:28.146619400Z.

Event[14]:
  Log Name: System
  Source: Microsoft-Windows-Kernel-General
  Date: 2014-03-11T12:22:00.531
  Event ID: 12
  Task: N/A
  Level: Information
  Opcode: Info
  Keyword: N/A
  User: S-1-5-18
  User Name: NT AUTHORITY\SYSTEM
  Computer: 37L4247E29-32
  Description: 
The operating system started at system time ?2014?-?03?-?11T15:22:00.468799900Z.
Shut down at 2009 and wake up at 2014? What is the possible explanation of it? I am not sure.

If you havent performed a clean install, do it. Test your hardware. Scan for possible virus infection, and make it sure that there is no activation hack.

If all are ok, you may have got a bad replacement.
My System SpecsSystem Spec
02 Apr 2014   #76
ddg5006

Microsoft Windows 7 64-bit 7600
 
 

No I have not done a clean install since I got the replacement board, I didn't think it was needed, from my understanding of working with computers in the past, as long as the hardware specs are the same or very close to it, there usually isn't any problem with using the same version of windows. But at this point i'll try anything to get this build up and running.

Not sure about the shutdown in 2009 and startup in 2014, that is weird. Maybe the MB time was off when it shipped???

As far as virus' I know for a fact that there is no virus. Also I am not using an activation hack, I am using a corporate version in Enterprise activated through a local KMS server. So I know 100% that the version I am using is genuine.
My System SpecsSystem Spec
02 Apr 2014   #77
ddg5006

Microsoft Windows 7 64-bit 7600
 
 

Quote:
Try running with only one RAM installed.

Both tests came up clean, the one with both sticks in and the one with just 1. I ran about 15 passes with the 2 sticks and 24 passes with the 1 stick. No errors.
My System SpecsSystem Spec
02 Apr 2014   #78
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Shutdown times are System times when the event occurred. I also would recommend a new install. It's a hassle but you can have a nice, well running system then.
My System SpecsSystem Spec
02 Apr 2014   #79
ddg5006

Microsoft Windows 7 64-bit 7600
 
 

Quote   Quote: Originally Posted by Britton30 View Post
Shutdown times are System times when the event occurred. I also would recommend a new install. It's a hassle but you can have a nice, well running system then.
Reinstalling as we speak
My System SpecsSystem Spec
02 Apr 2014   #80
ddg5006

Microsoft Windows 7 64-bit 7600
 
 

No good, there is still something seriously wrong.

See files below for crashes

Installing sp1 now to see if that will help any

**Update : BSOD w/ Memory Management while installing sp1
My System SpecsSystem Spec
Reply

 New Build, Multiple BSOD, Unknown error code




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD playing various games, unknown error code.
I'm currently experiencing BSOD after playing a number of different games requiring large and small amounts of my PC. It happened to me a few weeks ago; then stopped for a while; and has just restarted today and can happen from any hour to every few minutes. My computer shuts down; showing a...
BSOD Help and Support
BSOD multiple times, error code unknown
Hi guys :( Sorry I do not know the error code by the time I got a pen/paper out it had disappeared. I have had multiple BSOD I have attached the minidump files (zip). The crash happened once when I was using google chrome and the other time straight after the first BSOD and the computer had...
BSOD Help and Support
BSOD - unknown error code computer restarted
Hello, Unfortunately i'm getting these BSOD errors and i'd pretty much like to know what is causing them. As per your instructions i've managed to gather the requested information in order to post them here and with your help maybe i can find out what's causing the errors. If i need to...
BSOD Help and Support
BSOD Error Code 0x07e, Unknown reason
Hi all, I was browsing the web earlier today and got a random BSOD. The first one I got was a Memory Management one, but a Crash Dump for this one does not appear in the Minidump folder. After restarting my computer, I got a second BSOD about 3 minutes after logging in, This time it was a...
BSOD Help and Support
BSOD STOP Error Code: 0x0000004e, unknown cause
I've been getting the BSOD sporadically for quite some time now and I am finally fed up. Here is the STOP error information: Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 1033 Additional information about the problem:
BSOD Help and Support
Multiple BSOD's, some Shockwave and Spyware Doctor, unknown error code
I really apologize for the vague title, all I can say about these BSOD's are that they've occurred with increasing frequently over the past week, and are seemly random. I have noticed that they happen more often whenever Shockwave crashes in Chrome and does not recover. I've also noticed that I get...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:12.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App