Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Errors, Mainly 0x00000000D1 help

12 Mar 2014   #1

Windows 7 64 bit SP1 OEM
 
 
BSOD Errors, Mainly 0x00000000D1 help

Hey all. I've been getting a lot of BSOD's and some are the same and some are different. I've had freezes/lockups that do not show up, except in the event viewer. I'm not sure on how to post a zip of the "who crashed", or "blue screen view", (due to the fact I don't know how to make these things into zips), but here's a couple of screenie of the who crashed report.




As I said earlier, some of my errors never showed up in these programs. Thanks all!


My System SpecsSystem Spec
.

12 Mar 2014   #2
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

Post it following the Blue Screen of Death (BSOD) Posting Instructions. Dont start a new thread. Add the data to your next post.
My System SpecsSystem Spec
12 Mar 2014   #3

Windows 7 64 bit SP1 OEM
 
 

Ok.. here it is ( I hope) Just got another BSOD before I came back here.


Attached Files
File Type: zip SF_12-03-2014.zip (1.38 MB, 10 views)
My System SpecsSystem Spec
.


13 Mar 2014   #4
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the results.
My System SpecsSystem Spec
13 Mar 2014   #5

Windows 7 64 bit SP1 OEM
 
 

I have ran memtest86 on a few different occasions. I have used furmark while I was over clocking my gpus in the past. No issues with either. But I guess I'll try again...
My System SpecsSystem Spec
13 Mar 2014   #6

Windows 7 64 bit SP1 OEM
 
 

Ok. So I ran furmark. Highest GPU 1 got was 82c. Highest GPU 2 got was 74c. A little high for my liking, but it's pretty common for GPU 1 to be hotter than #2. Fan speeds didn't even exceed 65%.. so I know I really don't have temperature issues. There were not any artifacts either.
My System SpecsSystem Spec
13 Mar 2014   #7

Windows 7 64 bit SP1 OEM
 
 

Quote   Quote: Originally Posted by Arc View Post
Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the results.
Is there anything in the zip file that points to anything specific? Or are we just trying to eliminate hardware issues?
My System SpecsSystem Spec
13 Mar 2014   #8

Windows 7 64 bit SP1 OEM
 
 

This is the result of my memtest86. Just happened a little bit ago. I stopped the test after this.
My System SpecsSystem Spec
13 Mar 2014   #9

Windows 7 Home Premium 64-bit
 
 

Oops! Test each stick one at a time.
My System SpecsSystem Spec
15 Mar 2014   #10

Windows 7 64 bit SP1 OEM
 
 

Quote   Quote: Originally Posted by Arc View Post
Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the results.

Ok. As stated above, ran the tests on my GPUs and memory modules. The GPUs passed easily. When I tested the memory all at once I got 1 error. So just got done testing all 4 modules individually and no errors what so ever. The minimum passes I did on any of them were 8. The maximum was 18 passes. So now, is there any other ideas? I have not yet put all the ram back in. Please let me know what you think. Thanks.
My System SpecsSystem Spec
Reply

 BSOD Errors, Mainly 0x00000000D1 help




Thread Tools



Similar help and support threads for2: BSOD Errors, Mainly 0x00000000D1 help
Thread Forum
Solved BSOD After New System Build, Many Different Types of BSOD Errors. BSOD Help and Support
BSOD errors irq not less or equal too among other errors. BSOD Help and Support
bsod constant errors, restarting ,multiple bsod BSOD Help and Support
Boot errors,shutdown errors, wake errors. Performance & Maintenance
bluescreens/stack dumps/memory errors/bad image errors BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:30 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33