Windows 7 Ultimate BSOD, Error 0x0000000a

GamerX51 · 17 Mar 2014

I've been getting this BSOD over the last few days, but only once a day when I first turn my computer on... after that, it runs perfectly fine until I turn it on again the next day.

This is getting seriously annoying... can anyone help me? .DMP file is enclosed. System is Alienware Aurora if that matters.

Thedoctor44 · 17 Mar 2014

Run memtest86 overnight for at least 8 passes. Post the results.

RAM - Test with Memtest86+

Code:

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {ffffffffffffff8d, 2, 1, fffff800032d593e}

*** WARNING: Unable to verify checksum for win32k.sys
Probably caused by : memory_corruption

Followup: memory_corruption
---------

4: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: ffffffffffffff8d, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
	bit 0 : value 0 = read operation, 1 = write operation
	bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff800032d593e, address which referenced memory

Debugging Details:
------------------


WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80003505100
 ffffffffffffff8d 

CURRENT_IRQL:  2

FAULTING_IP: 
nt!KiTimerWaitTest+24e
fffff800`032d593e 004889          add     byte ptr [rax-77h],cl

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  CODE_CORRUPTION

BUGCHECK_STR:  0xA

PROCESS_NAME:  System

TRAP_FRAME:  fffff88003c463d0 -- (.trap 0xfffff88003c463d0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000004 rbx=0000000000000000 rcx=fffffa800621f640
rdx=0000000000000102 rsi=0000000000000000 rdi=0000000000000000
rip=fffff800032d593e rsp=fffff88003c46560 rbp=fffffa800621f668
 r8=fffff880009b4301  r9=0000000000000003 r10=00000000000000f7
r11=0000000000000000 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz na pe nc
nt!KiTimerWaitTest+0x24e:
fffff800`032d593e 004889          add     byte ptr [rax-77h],cl ds:ed80:ffffffff`ffffff8d=??
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff800032cd169 to fffff800032cdbc0

STACK_TEXT:  
fffff880`03c46288 fffff800`032cd169 : 00000000`0000000a ffffffff`ffffff8d 00000000`00000002 00000000`00000001 : nt!KeBugCheckEx
fffff880`03c46290 fffff800`032cbde0 : 00000000`0000000a fffffa80`0670a680 fffff880`009b2180 fffffa80`0621f668 : nt!KiBugCheckDispatch+0x69
fffff880`03c463d0 fffff800`032d593e : fffff880`03b64180 fffffa80`05895060 00000000`00000000 fffffa80`0d15be50 : nt!KiPageFault+0x260
fffff880`03c46560 fffff800`032d869d : fffffa80`0621f660 fffffa80`0d24b168 fffffa80`0d24b168 00000000`00000102 : nt!KiTimerWaitTest+0x24e
fffff880`03c465e0 fffff800`032d85de : 00000001`69bcd1fc fffff880`03c46c58 00000000`000097f7 fffff880`009b6468 : nt!KiProcessExpiredTimerList+0x6d
fffff880`03c46c30 fffff800`032d83c7 : 00000000`5e7d81c2 00000000`000097f7 00000000`5e7d8173 00000000`000000f7 : nt!KiTimerExpiration+0x1be
fffff880`03c46cd0 fffff800`032c58ca : fffff880`009b2180 fffff880`009bd0c0 00000000`00000001 fffff800`00000000 : nt!KiRetireDpcList+0x277
fffff880`03c46d80 00000000`00000000 : fffff880`03c47000 fffff880`03c41000 fffff880`03c46d40 00000000`00000000 : nt!KiIdleLoop+0x5a


STACK_COMMAND:  kb

CHKIMG_EXTENSION: !chkimg -lo 50 -d !nt
    fffff800032d5938 - nt!KiTimerWaitTest+248
	[ 49:09 ]
1 error : !nt (fffff800032d5938)

MODULE_NAME: memory_corruption

IMAGE_NAME:  memory_corruption

FOLLOWUP_NAME:  memory_corruption

DEBUG_FLR_IMAGE_TIMESTAMP:  0

MEMORY_CORRUPTOR:  ONE_BIT

FAILURE_BUCKET_ID:  X64_MEMORY_CORRUPTION_ONE_BIT

BUCKET_ID:  X64_MEMORY_CORRUPTION_ONE_BIT

Followup: memory_corruption
---------

GamerX51 · 19 Mar 2014

Unfortunately, I can't use Memtest because I don't have a usb flashdrive or a cd rom. So I can't run the program.