Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Help with this bsod

23 Mar 2014   #1
itekweni

Windows 7
 
 
Help with this bsod

Good afternoon I have only just upgraded from win7 home 32bit to home 64 bit and have already had a BSOD which is a little worrying as its a clean install I have included a zip file made from running DM log collector hope it helps in seeing what the problem might be...thanks in advance


My System SpecsSystem Spec
.
23 Mar 2014   #2
HarriePateman

Windows 7 Ultimate 64-bit
 
 

Hello, Found this;

Code:
Service Name:  nvlddmkm
Service File Name:  system32\DRIVERS\nvlddmkm.sys
Service Type:  kernel mode driver
Service Start Type:  demand start
Service Account:  

Event[698]:
  Log Name: System
  Source: Microsoft-Windows-UserPnp
  Date: 2014-03-13T18:57:24.879
  Event ID: 20003
  Task: N/A
  Level: Information
  Opcode: Info
  Keyword: N/A
  User: S-1-5-18
  User Name: NT AUTHORITY\SYSTEM
  Computer: The-Beast
  Description: 
Driver Management has concluded the process to add Service nvlddmkm for Device Instance ID PCI\VEN_10DE&DEV_1200&SUBSYS_15633842&REV_A1\4&2D68EC9A&0&0008 with the following status: 0.



Update your GFX Drivers. Remember to delete the old ones!
My System SpecsSystem Spec
23 Mar 2014   #3
Thedoctor44

 

I disagree, the BSOD is a clock watchdog timeout which generally indicates the processor hangs and cannot perform interrupt requests.

Well overclocking isn't your issue because you're only 9MHz higher than what you should be.

Code:
CPUID:        "Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz"
MaxSpeed:     3300
CurrentSpeed: 3309
Hmm, I'll look into it more tomorrow.
My System SpecsSystem Spec
.

24 Mar 2014   #4
itekweni

Windows 7
 
 

Hi Thedoctor44 thanks for the update and the cpuid you looking at my MB was bought as an overclocked bundle which was configured by the supplier hope this helps
My System SpecsSystem Spec
24 Mar 2014   #5
Thedoctor44

 

Can you run prime95 and post the results, including temperature. Please follow these instructions.

Hardware - Stress Test With Prime95
My System SpecsSystem Spec
26 Mar 2014   #6
itekweni

Windows 7
 
 

Hi Thedoctor44 I am trying to run the suggested application but so far my pc hangs but I am not going to give up and will try get the results you need
My System SpecsSystem Spec
26 Mar 2014   #7
Thedoctor44

 

Does your PC hang when running the test? If so does it only hang when running that particular test? If both answers are yes there is a strong indication that it is your CPU.
My System SpecsSystem Spec
02 Apr 2014   #8
itekweni

Windows 7
 
 

Hi thedoctor44 sorry for delay in coming back to you. I have run tests and if my pc is in overclocked state then it fails test and if I reset it to standard in bios it runs the test and I stop it after an hour as it passes all...as I said in an earlier post this board was overclocked by the supplier and I am speaking to them as the system is still in warranty
My System SpecsSystem Spec
02 Apr 2014   #9
Thedoctor44

 

I think you may have solved your problem. Your manufacturer might have overclocked the PC too much.
My System SpecsSystem Spec
Reply

 Help with this bsod




Thread Tools Search this Thread
Search this Thread:

Advanced Search



Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:26.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App