Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Various BSOD while playing MoW and while inactive

27 Mar 2014   #1
silentmat

Windows 7 home premium 64 bit
 
 
Various BSOD while playing MoW and while inactive

Most of the BSOD's are from ntoskrnl.exe, but others have been from nVidia, TCPIP, DIrectx....
Here is the SF_Diagnostic_Tool report. If I am supposed to upload something else also - I am sorry I didn't see it posted.


My System SpecsSystem Spec
.
30 Mar 2014   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Hi silentmat.

Apparently it is a display driver related issue.
Code:
BugCheck D1, {590, 5, 0, fffff880111c5933}

*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+19b933 )

Followup: MachineOwner
---------
And unfortunately I dont know any driver version that works good with GTX 770. You may try the drivers on a trial and error basis:
  • 320.49 WHQL
  • 327.23 WHQL
  • 331.58 WHWL
  • 331.65 WHQL
  • 331.82 WHQL
  • 332.21 WHQL
  • Any other later version .....
Get them from Drivers - Download NVIDIA Drivers

Do a clean install on all of them. Uninstall the previously installed driver first.
Uninstall All nvidia items in Control Panel > Programs and features
    • 3D Vision Control Driver
    • 3D Vision Driver
    • Graphics Driver
    • HD Audio Driver
    • PhysX
    • nvidia Update
    • GeForce Experience
    (Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
  • Now follow Drivers - Clean Left over Files after Uninstalling
  • Download the target WHQL. While installing, Select Custom (Advanced) install. In the next page, follow this settings:

Lengthy process, but the only stable version of nvidia is 314.22 lately, which does not support 700 series GPU.

This will be a time consuming process, but you should hope that one of the drivers will work good there.

Also update Killer e2200 PCI-E Gigabit Ethernet Controller (NDIS 6.20).
Code:
BugCheck D1, {fffff8000348d410, 2, 0, fffff8800165a682}

*** WARNING: Unable to verify timestamp for bflwfx64.sys
*** ERROR: Module load completed but symbols could not be loaded for bflwfx64.sys
Probably caused by : bflwfx64.sys ( bflwfx64+123f )

Followup: MachineOwner
---------
Get it from Driver Downloads | Qualcomm Atheros, Inc..

Some hardware issues are reported, too.
Code:
BugCheck D1, {2540be400, 2, 1, fffff880016714aa}

Probably caused by : hardware ( tcpip!TcpAdjustDefaultTcbRcvWnd+7a )

Followup: MachineOwner
---------
Are you overclocking? As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings.

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.
If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Stress test the CPU.
Hardware - Stress Test With Prime95

Let us know the results.
My System SpecsSystem Spec
30 Mar 2014   #3
silentmat

Windows 7 home premium 64 bit
 
 

Ok will get on it.... not overclocking though.
My System SpecsSystem Spec
.

30 Mar 2014   #4
silentmat

Windows 7 home premium 64 bit
 
 

Are there logs that I need to post, or just answers like "Yep, no problems running this program"?
My System SpecsSystem Spec
30 Mar 2014   #5
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

You may post screenshots etc.
My System SpecsSystem Spec
31 Mar 2014   #6
silentmat

Windows 7 home premium 64 bit
 
 

OK, every test ran fine except for Prime95, which BSOD at 156 degrees F
Here's some SS and a new SF_Diagnostic_Tool
My System SpecsSystem Spec
31 Mar 2014   #7
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by silentmat View Post
OK, every test ran fine except for Prime95, which BSOD at 156 degrees F
156 degrees F is not a very high temperature to make the CPU crash, other than the fact that the CPU itself is not being able to take the stress.

In this situation it would be better to replace the CPU; because a failing CPU will continue to cause BSODs.
My System SpecsSystem Spec
Reply

 Various BSOD while playing MoW and while inactive




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Partition - Mark as Inactive
How to Mark a Partition as Inactive in Windows 7 and Vista Marking a partition as active on a basic disk means that the computer will use the loader (an operating system tool) on that partition to start the operating system. Marking a partition as active if it doesn't contain the loader for...
Tutorials
USB 3 ports inactive?
Gentlemen bare with me. Sometimes i think technology is leaving me behind. The wife's new 'generic' PC has a combo of USB ports. Some have a blue ring around them which a tech said designates USB 3. He's not around to ask the next obvious question. "how do i activate them?" This PC's Specs...
Hardware & Devices
BSOD with BAD_POOL_HEADER while computer inactive
My Windows 7 64bit PC crashes periodically. Sometimes I get BSOD, and other times it reboots. Most often this happens while it is sitting inactive (but not asleep). The ZIP file from last night, 11-08-12 is attached. The BSOD said BAD_POOL_HEADER. The files saved with SF Diagnostic Tool is...
BSOD Help and Support
USB ports inactive?
I just upgraded to Win 7 Home Premium 64-bit with a fresh installation on a new HDD. I have only put on a few utilities so far, and allowed Windows to do all the updates it wanted. When I plug a memory stick or externall HDD into the USB ports, nothing happens! I can't see the drive in the...
Hardware & Devices
Pages frequently go inactive. What do I do?
Hello, I've recently upgraded to Windows 7 ult(clean install with mech upgrade as well). Everything seems to work fine but I noticed that whenever I open my web browser and browse the web or work on document by typing, the page I'm currently browsing or working on goes inactive(it does not freeze...
Performance & Maintenance


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:37.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App