Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: i seem to fix one BSOD, and get another. idk what to do

11 Apr 2014   #1
DurtyGemini

Windows 7 Professional x64 SP1
 
 
i seem to fix one BSOD, and get another. idk what to do

Hi, i built my first computer this Christmas. i hadn't started getting a few bluescreens, until a few months in, and it seems i fix one, and it causes another. i've had a ton, done a ton of reasearch, and no matter what i try i get different ones, maybe the same error, but no the same error code. im all out of options, and was wondering if i should just do a fresh install of windows ? any suggestions or solutions?

Many thanks, Jake.


My System SpecsSystem Spec
.
11 Apr 2014   #2
Thedoctor44

 

You have some memory corruption. Please run memtest86 by following these instructions.

RAM - Test with Memtest86+

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {70a0a117a, 2, 1, fffff8000357ac9f}

Probably caused by : memory_corruption ( nt!MiIdentifyPfn+26f )

Followup: MachineOwner
You are getting graphics driver errors.
I see your graphics driver is up to date so can you please follow these instructions on how to safely remove and install graphics drivers.

NVIDIA Drivers - Avoid Problems

Code:
fffff800`00b9c5d8 fffff800`032cf169 : 00000000`0000000a 00000000`000dc09f 00000000`0000000a 00000000`00000001 : nt!KeBugCheckEx
fffff800`00b9c5e0 fffff800`032cdde0 : fffff880`049ec420 fffff880`010c0f04 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69
fffff800`00b9c720 fffff880`0f6b553f : 00000000`00000000 fffff880`0f64e7de fffffa80`0dc0d8e0 00000000`00000000 : nt!KiPageFault+0x260
fffff800`00b9c8b0 00000000`00000000 : fffff880`0f64e7de fffffa80`0dc0d8e0 00000000`00000000 00000000`00000000 : nvlddmkm+0x21253f
This indicates your graphics driver is causing a page fault by accessing a certain page of memory that is isn't authorized to do so.

Code:
nt!NtWaitForWorkViaWorkerFactory+0x1fc:
fffff800`032b4d7d f04c0fb129      lock cmpxchg qword ptr [rcx],r13 ds:fffffa80`1387e220=????????????????
A compare and exchange call has been made which has failed.
It wouldn't surprise me if your CPU is failing from the amount of different bugchecks you are having.
Please follow these instructions on how to run Prime95 to stress test your CPU

Hardware - Stress Test With Prime95

You are also having errors for your network drivers.
Please enable Driver Verifier to find the driver responsible.
Follow these instructions.

Driver Verifier - Enable and Disable

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {fffff88101b4608c, 2, 0, fffff88001a853a1}

Probably caused by : tcpip.sys ( tcpip!memmove+1d1 )

Followup: MachineOwner
Post back the results.
My System SpecsSystem Spec
11 Apr 2014   #3
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Hi.

The Driver Linksys AE1200 USB adapter is failing.
Code:
fffff800`07545270  fffff880`04c5fc34Unable to load image \SystemRoot\system32\DRIVERS\AE1200w764.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for AE1200w764.sys
*** ERROR: Module load completed but symbols could not be loaded for AE1200w764.sys
 AE1200w764+0x1bc34
Which is old enough.
Code:
fffff880`04c44000 fffff880`04d7b000   AE1200w764 T (no symbols)           
    Loaded symbol image file: AE1200w764.sys
    Image path: \SystemRoot\system32\DRIVERS\AE1200w764.sys
    Image name: AE1200w764.sys
    Timestamp:        Tue Mar 29 05:52:08 2011 (4D912630)
    CheckSum:         0013392A
    ImageSize:        00137000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
But no update is available.

Attachment 313481

As no update to a failing driver is available, it is better to remove it.

Can you try any other adapter and see the situation?
My System SpecsSystem Spec
.

11 Apr 2014   #4
Thedoctor44

 

It would also appear you have a network driver installed that shouldn't be installed.
You have an Atheros driver installed when you have a Linksys network adapter.
Can you please remove it via control panel.

I will say though that this issue might have already been rectified as this dump file dates back to early march, I just thought I'd put that out there.
My System SpecsSystem Spec
11 Apr 2014   #5
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Though the Atheros driver is inactive, stopped, but still, as Thedoctor44 suggests, remove it as you dont use it.

NAMEDESCRIPTIONFILETYPESTARTEDSTART_MODESTATE
athr Extensible Wireless Network Adapter Service c:\windows\system32\drivers\athrx.sys Kernel Driver No Manual Stopped
linksys_adapter_h Linksys Adapter Network Driver c:\windows\system32\drivers\ae1200w764.sys Kernel Driver Yes Manual Running
My System SpecsSystem Spec
11 Apr 2014   #6
DurtyGemini

Windows 7 Professional x64 SP1
 
 

Thank you guys so much for all the advice, and its odd, because my last wifi card was failing as well even with the most recent drivers for it (any suggestions on a newer one being as i don't currently have access to a Ethernet cable), being as it was TP-Link dual adapter. so i picked up the wifi usb adapter about a week or two ago thought it was working but i guess not. I have ran Memtest86 for over 12 hours, and it said nothing was wrong, so im wondering if it could be the motherboard? but i will run the driver verify to see what drivers are bad, and when i updated my GPU drivers most of the GPU crashes seemed to stop, or at least not appear as frequent. I will also, stress test my CPU and come back with all the results. thank you all. its been a nightmare so far, and this is my firs "gaming," oriented rig that's for personal use. seems i got in a bit over my head. but i will run all the suggested things, and come back with my results. Again, i greatly appreciate all the help. Also, which tests should i run on Prime95? the one the guide tells me to, or one in particular?

Many thanks, Jake.
My System SpecsSystem Spec
11 Apr 2014   #7
DurtyGemini

Windows 7 Professional x64 SP1
 
 

So, i ran the verifier, and the driver that kept coming up was PxHlpa64.sys, and i ran Prime95 for about 2-3 hours and it had said that it found 0 problems with any of my cores. any suggestions?

I also tried numerous times to uninstall the qualcom/atheros drvier/utility it came up with some loading screen and then nothing happened.
My System SpecsSystem Spec
11 Apr 2014   #8
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Thats a Sonic DVD driver. See if Windows Update has a generic update available for the driver.

Driver Reference Table
My System SpecsSystem Spec
11 Apr 2014   #9
DurtyGemini

Windows 7 Professional x64 SP1
 
 

Quote   Quote: Originally Posted by Golden View Post
Thats a Sonic DVD driver. See if Windows Update has a generic update available for the driver.

Driver Reference Table

i tried that, but windows update says everything is all good. im not too sure where to look for that specific update?
I also ran verifier after i had done all of suggested things, and it just booted right up, no problems or anything, is that normal?
My System SpecsSystem Spec
11 Apr 2014   #10
DurtyGemini

Windows 7 Professional x64 SP1
 
 

i know i ask a lot of questions, but another one, well two more, is if i just reinstall windows will some of it get fixed or is it more than that? another one is, i have a win 8 64bit upgrade disk, will upgrading help at all?

attached is my latest SF diagnostics
My System SpecsSystem Spec
Reply

 i seem to fix one BSOD, and get another. idk what to do




Thread Tools Search this Thread
Search this Thread:

Advanced Search



Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:37.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App