Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: 0x00000050 BSOD only when 2 memory modules installed

13 Apr 2014   #1
Dathorin

Windows 7 Home Premium x64
 
 
0x00000050 BSOD only when 2 memory modules installed

I keep getting a 0x00000050 BSOD when the two dd3 sodimms are installed in my HP dv7-6157cl, however if I only install one (either of them) I don't get any errors at all.


My System SpecsSystem Spec
.
14 Apr 2014   #2
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.
Quote:
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.
*Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.
*If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
*If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot.
*If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
*If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.
information   Information
Errors are sometimes found after 8 passes.

Tip   Tip
Do this test overnight, before going to bed.
My System SpecsSystem Spec
Reply

 0x00000050 BSOD only when 2 memory modules installed




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Is it OK to mix RAM - so 1 GIG Memory Modules with 2 GIG's?
Looking for some help here! I ordered some RAM modules and my PC has 6 RAM slots. I have 4 x 2GIG Memory Modules coming in the post so is it ok to mix them on the same motherboard? So the total will be like this: 4 x 2GIG Memory Modules 2 x 1GIG Memory Modules So 10 GIG in total - is that cool...
General Discussion
6x2GB 1600MHz vs 4x4GB 2133MHz Memory Modules
I have a GA-EX58-UD5 motherboard with 6 memory slots. (i7-920 OC to 3.8)Currently installed are CORSAIR XMS3 12GB (6 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model HX3X12G1600C9 G. My motherboard can handle faster memory, so to try and give me a boost, I bought (2) G.SKILL...
Hardware & Devices
BSOD - when 2 modules of mem. inserted
Hello, Please Help. I experience BSOD's when I insert my second module of my 4 gb Kingston ram. I have run a memtest86 for 17 cycles with both modules inserted - all tests pass. I have tried both modules individually and both pass. I have checked the asus's memory list and my memory is...
BSOD Help and Support
Mis-insert Dual Channel RAM memory modules?
As far as I can see I have currently dual channel DDR3 RAM memory modules. Assume it would not be written on a label sticker on the ram modules: How can I find out if a ram modules support dual channel or not? As I learned I have to put dual channel mondules into different channel slots to...
Hardware & Devices
many different BSOD caused by many different modules
Hello to BSOD team... I'm running Windows 7 premium x64 AMD Phenom II x4 965 8 gigabytes memory Custom built Full retail version Hardware is 2 years old Last reinstall 2/26/2011
BSOD Help and Support
Samsung intros 4Gbit DRAM, touts memory modules of up to 32GB
more: TechSpot - PC Technology News and Analysis
News


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:30.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App