Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSOD With Little Information That Won't Go Away

14 Apr 2014   #1
dchosen

Windows 7 64 bit
 
 
Random BSOD With Little Information That Won't Go Away

Hello All,

This is my first post and I apologize that it is asking for something. However, I found this wonderful site through searching through the internet looking for my solution. I recently got a brand new machine (hp z30 workstation with an i7) and out of the box it seems to have bsod issues. I updated all of the windows updates possible and the rate of bsods increased. I then formatted hard drive and reinstalled windows 7 64bit and in about 2 weeks I have had 2 bsods. I am uploading the minidump folder in hopes that someone could point me in the direction to a fix. I am more concerned about the IRQL_NOT_LESS_OR_EQUAL as that is the one I most frequently get.

Also I've ran malware (mabs) and virus scans after the cannot write to read only memory bsod.

Thank You In Advance


My System SpecsSystem Spec
.
14 Apr 2014   #2
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Norton contributes to BSOD's. Please remove it for testing purpose. Use Microsoft Security Essentials.

Recommended from a strict BSOD perspective, compatibility & stability compared to other security software:

Microsoft Security Essentials - Free Antivirus for Windows

Malwarebytes - Free

Good and Free system security combination.

Reduce items at start-up: Startup Programs - Change

Perform a clean boot: Troubleshoot Application Conflicts by Performing a Clean Startup

Run a System file check (SFC): SFC /SCANNOW Command - System File Checker

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable!:-

adfs.SYS Fri Jun 27 02:52:37 2008 (48640195)
Adobe File System Driver
Driver Reference Table - adfs.SYS

Quote:
Use Revo Uninstaller to uninstall stubborn software. Opt for Advance Mode while uninstalling which allows leftover registry removal:Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems

Perform a clean install of a driver following: How to Clean Left Over Driver Files with Driver Sweeper
Check for heating issues using Speccy or HWmonitor

Upload a screen shot: Screenshots and Files - Upload and Post in Seven Forums

If this does not provide stability. Test RAM.

Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.
Quote:
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.
*Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.
*If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
*If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot.
*If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
*If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.
information   Information
Errors are sometimes found after 8 passes.

Tip   Tip
Do this test overnight, before going to bed.


BSOD DUMP OUTPUT
Code:
Debug session time: Mon Apr 14 07:09:05.397 2014 (UTC + 6:00)
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
System Uptime: 4 days 23:51:58.753
Probably caused by : memory_corruption
BugCheck A, {c0, 2, 1, fffff80003087a84}
BugCheck Info: IRQL_NOT_LESS_OR_EQUAL (a)
Bugcheck code 0000000A
Arguments: 
Arg1: 00000000000000c0, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
	bit 0 : value 0 = read operation, 1 = write operation
	bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80003087a84, address which referenced memory
BUGCHECK_STR:  0xA
DEFAULT_BUCKET_ID:  CODE_CORRUPTION
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_MEMORY_CORRUPTION_ONE_BIT
MaxSpeed:     3400
CurrentSpeed: 3392
BiosVersion = L51 v01.13
BiosReleaseDate = 10/18/2013
SystemManufacturer = Hewlett-Packard
SystemProductName = HP Z230 Tower Workstation
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Debug session time: Wed Apr  9 07:16:08.646 2014 (UTC + 6:00)
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
System Uptime: 1 days 11:50:06.260
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
BugCheck BE, {fffff88001f2acc0, 4753121, fffff88004455b10, a}
BugCheck Info: ATTEMPTED_WRITE_TO_READONLY_MEMORY (be)
Bugcheck code 000000bE
Arguments: 
Arg1: fffff88001f2acc0, Virtual address for the attempted write.
Arg2: 0000000004753121, PTE contents.
Arg3: fffff88004455b10, (reserved)
Arg4: 000000000000000a, (reserved)
BUGCHECK_STR:  0xBE
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  System
MaxSpeed:     3400
CurrentSpeed: 3392
BiosVersion = L51 v01.13
BiosReleaseDate = 10/18/2013
SystemManufacturer = Hewlett-Packard
SystemProductName = HP Z230 Tower Workstation
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
My System SpecsSystem Spec
Reply

 Random BSOD With Little Information That Won't Go Away




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD Tutorials and Information Links
Whilst trying to wrap my head around what is involved in trying to learn how to analyze BSOD's, and furthermore analyze and make sense of data generated by Windows event logs (see Event Viewer), I have come across a series of tutorials, articles and websites which may assist anyone else looking...
Crash and lockup debug 'How To'
What does this BSOD Information Mean?
Windows Update has toasted my os. After restarting my computer to install some updates, Windows will not load. The trouble is like this: 1)BSOD 2)Goes to "Windows is loading files" 3)"Startup Repair is checking your system" 4)"Windows cannot repair this computer automatically" 5)Computer turns...
BSOD Help and Support
BSOD and Memory; need information
Hello, Recently, I've been getting tons of crashes in pretty much any programs. Firefox, Skype, games... everything. Even Windows Updates fails and never finishes. AS far as BSOD's go, I've only got one, but it flashed quickly and didn't see what it said, and the DMP file apparently wasn't...
BSOD Help and Support
BSOD, How to find information about it?
Hello, my computer is about 2 years old and never had a problem with it until now. I decided to format it and do a clean install of windows. Today I got a BSOD after a shutdown that had 2 updates to be made. It did the updates process where it said to not shutdown the computer but then the BOSD...
BSOD Help and Support
BSOD-Please help me(full information)
Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 1033 BCCode: 24 BCP1: 00000000000C08A5 BCP2: 0000000000000000 BCP3: 0000000000000000 BCP4: 0000000000000000 OS Version: 6_1_7601
BSOD Help and Support
BSOD, All Information Needed Attached Here!
Hi, I've been a lurker to the forums for a while now. I recently built a PC about 5 months ago and successfully it has had no issues until today. Can anyone of the professionals care to help me diagnose my issue? Intel I5 2500K 3.3GHZ 8 G.B. Ram
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

й Designer Media Ltd

All times are GMT -5. The time now is 04:05.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App