Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Kernel Power event 41 - SF attached

28 Apr 2014   #21
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

They should be pretty much static. Some slight movement is OK as long as it stays within ATX standards, which is +/- 5%. Your +12V is above that . Please check the voltage again.

Also your Vcore is way too high. It is very close to it's max. Are you overclocking it?


My System SpecsSystem Spec
.
28 Apr 2014   #22
hribeiro

Windows 7 Ultimate x64
 
 

oddly, when the bios is defaulted (CMOS reset) the the video setting is PCI express and I have to changed it to On board (there's also PCI)
My System SpecsSystem Spec
28 Apr 2014   #23
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Well, Asrock picks a few odd things to be set as default on their boards. But, aslo I edited my post above. Are you overclocking? Your Vcore is way too high.
My System SpecsSystem Spec
.

28 Apr 2014   #24
hribeiro

Windows 7 Ultimate x64
 
 

No everything as it is. On the OC "tab" everything is auto or similiar. Should I make any change?
My System SpecsSystem Spec
28 Apr 2014   #25
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Not right now. Boot into Windows if you can, let it run and settle down, then post a screenshot of CPUz, the CPU tab and the mainboard tab. Also, are you keeping check on your CPU temps? If so, what are they at idle and when using the computer during something fairly strenuous?
My System SpecsSystem Spec
07 May 2014   #26
hribeiro

Windows 7 Ultimate x64
 
 

Hi There,

haven't been able to get video and proceed to windows.

One thing i find odd when I turn PSU on the PC immediately starts, with no need to press the computer's power button. Is this normal?

Other thing, would this behaviour be consistent with a CPU damaged pin?

Thank you
My System SpecsSystem Spec
07 May 2014   #27
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

hribeiro, I would not think so. I have never encountered such a problem from a bent pin and have never heard of it. I would check the pinout for your front panel connections, especially the power button and reset button.Also ckeck the 24 pin connection and make sure it is completely seated, there should be no space between the plug and where it plugs into. Also, check the power button itself and make certain it is not stuck in the on position. Do you get to the boot screen? Can you go into bios. If so, please tell me the readings for the +12V, +5V and +3.3V Also, please tell me the motherboard temp, the CPU temp and see if your graphics card is detected. Also, tell me your ram timings, frequency and Dram Voltage and what your sata controller is set to.
My System SpecsSystem Spec
16 May 2014   #28
hribeiro

Windows 7 Ultimate x64
 
 

So nothing new here. Same behaviour...

I was told if I could hear the HDD everything should be ok concerning MOBO and CPU. Is that true?

Also, I've made some experiences with my computer at work. It's connected by DVI (actually display port), Once I connect VGA cable and change the setting on the monitor I get the same behaviour on the VGA.

What a mess!
My System SpecsSystem Spec
22 May 2014   #29
hribeiro

Windows 7 Ultimate x64
 
 

Well, bottom line, I assumed it was a damaged motherboard.

Bought new MOBO and CPU.

Thank you essenbe. You were incredibly nice.

Thank you
My System SpecsSystem Spec
22 May 2014   #30
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

hribeiro, You're quite welcome and I am glad you have everything resolved. Once you determine that all of your problems are resolved, please mark the thread as solved. I hope your problem have been resolved, and happy computing.
My System SpecsSystem Spec
Reply

 Kernel Power event 41 - SF attached




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Kernel Power event 41 - SF attached
The workstation is used with Autodesk products AutoCad and Revit. Lately has been crashing randomly while working on Revit Architecture - is an Autodesk product. I suspect system instability and will look to format and reload operating system. I am submitting a set of logs using the DM log...
BSOD Help and Support
BSOD on Shutdown Event Log = Kernel-Processor-Power. Event ID: 6
Hi all, I've just built an AcerPower F6 desktop to Win 7 Pro 32 every shutdown it shows BSOD and promptly restarts. Event log is showing me the following for a critical event at the same time the shutdown occurs (The date on the log is from a week ago but this happens every shutdown which...
BSOD Help and Support
Random Power Down Issue - 'Event 41, Kernel-Power'
Hi Guys, I'm currently suffering from a random power shutdown issue. The PC boots up correctly and is totally useable and in working order. However after different varied amounts of time. 20mins - 5 hours on occasion. The PC will just randomly power down as if the power cable has been...
General Discussion
Event 1001 BugCheck Event 41 Kernel-Power Event 4 k57nd60a
Alright, started getting the 1001 BugCheck crash with Event 41 Kernel-Power BSOD a few times not long ago, widely spaced out incidents (it will lock up, make a very weird repetitive noise through my stereo speakers and will also get black and white bars across the screen before the blue screen...
BSOD Help and Support
BSODs after possible power failure - Kernel-Power Event ID:41
Hello there. Firstly, sorry for not posting the zipped files as requested, I ran the utility but my paths are custom and it did not create the folder as expected. I include the crashdump files and diagnostic however. Some background: PC is about 4 years old. It had Vista (x64) on it for the...
BSOD Help and Support
computer restarts, event 41 kernel power, zip attached
Recenlty I used to have a full memory dump when I used my other drive as a cache. I got this from an old crash report in event viewer on my win 7 pro, I made it the mini dump on my C drive for the last few weeks as im using an SSD. Though for a while I had no page file at all and noticed it...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:44.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App