Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: random reboots without BSOD - sometimes several daily


1 Week Ago   #51

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate SP1 X64 (Windows 8.1, Linux Mint, Windows XP and others in VM)
 
 

Read the tutorial again and it will tell you how to turn off Driver Verifier. That is why you set a restore point, so if you have trouble you can turn it off by using the restore point.
When you start up, click the start button and type verifier in the search box, click on verifier that appears, in the verifier manager click the radio button that says Delete Existing Settings and click Finish at the bottom. That should turn it off.

My System SpecsSystem Spec
.

1 Week Ago   #52

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate SP1 X64 (Windows 8.1, Linux Mint, Windows XP and others in VM)
 
 

Code:
BugCheck C4, {e1, 901bcfcc, 0, 0}
*** WARNING: Unable to verify timestamp for Uim_Vim.sys
*** ERROR: Module load completed but symbols could not be loaded for Uim_Vim.sys
Probably caused by : Uim_Vim.sys ( Uim_Vim+1488f )
Followup: MachineOwner
---------
7: kd> lmvm Uim_Vim
start    end        module name
95a3c000 95a7f200   Uim_Vim  T (no symbols)           
    Loaded symbol image file: Uim_Vim.sys
    Image path: Uim_Vim.sys
    Image name: Uim_Vim.sys
    Timestamp:        Wed Jul 04 17:55:33 2012 (4FF4C9E5)
    CheckSum:         00049576
    ImageSize:        00043200
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
That is UIM Drive Backup Image Plugin or Paragon Hard Disk Manager you should be able to find an update from Paragon Software: Download free partition software for home But, I still can't believe a driver will cause your computer to just shut down.
My System SpecsSystem Spec
1 Week Ago   #53

Windows 7 32bit Home Premium
 
 

Quote   Quote: Originally Posted by essenbe View Post
Read the tutorial again and it will tell you how to turn off Driver Verifier. That is why you set a restore point, so if you have trouble you can turn it off by using the restore point.
When you start up, click the start button and type verifier in the search box, click on verifier that appears, in the verifier manager click the radio button that says Delete Existing Settings and click Finish at the bottom. That should turn it off.
I've already disabled it.

I know about System Restore. But as I've said since the start of the thread this has been going on for months and months, getting worse all along. I keep system restore points but points made 6+ months ago are not going to still be available.
My System SpecsSystem Spec
.


1 Week Ago   #54

Windows 7 32bit Home Premium
 
 

I'm currently trying to install the newest Logitech Setpoint as I uninstalled the older one earlier this evening and twice now it won't install - it gets stuck. Th first time the installer triggered a reboot.
My System SpecsSystem Spec
1 Week Ago   #55

Windows 7 32bit Home Premium
 
 

Quote   Quote: Originally Posted by essenbe View Post
Code:
BugCheck C4, {e1, 901bcfcc, 0, 0}
*** WARNING: Unable to verify timestamp for Uim_Vim.sys
*** ERROR: Module load completed but symbols could not be loaded for Uim_Vim.sys
Probably caused by : Uim_Vim.sys ( Uim_Vim+1488f )
Followup: MachineOwner
---------
7: kd> lmvm Uim_Vim
start    end        module name
95a3c000 95a7f200   Uim_Vim  T (no symbols)           
    Loaded symbol image file: Uim_Vim.sys
    Image path: Uim_Vim.sys
    Image name: Uim_Vim.sys
    Timestamp:        Wed Jul 04 17:55:33 2012 (4FF4C9E5)
    CheckSum:         00049576
    ImageSize:        00043200
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
That is UIM Drive Backup Image Plugin or Paragon Hard Disk Manager you should be able to find an update from Paragon Software: Download free partition software for home But, I still can't believe a driver will cause your computer to just shut down.
I'm just going by other things I've read. I've read 2 things can cause these reboots - a driver issue or hardware issues. I'm not trying to be argumentative. I'm just trying to stay open-minded about all options, and keeping in mind other things I've read. I appreciate all the advice and I've done just about everything you guys have recommended. It's not like I'm ignoring the advice.

Is there a way to disable this Uim_Vim.sys Paragon backup driver for now so I can eliminate that from the equation?
My System SpecsSystem Spec
1 Week Ago   #56

Windows 7 32bit Home Premium
 
 

I ran the PC for hours today without a reboot, and then I went to make dinner and take a shower. When I returned, I moved the mouse cursor, and at that instant it rebooted. I really wish somebody would explain how that points to it being a power supply issue. I'm genuinely trying to understand.

I'm concerned about that BSOD message I got last night with Driver Verifier enabled:

"A Device Driver attempting to corrupt the system has been caught. The faulty driver currently on the kernal stack must be replaced with a working version."

I'd like to know how to identify which driver it's referring to and how to remove/replace it.
My System SpecsSystem Spec
1 Week Ago   #57

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate SP1 X64 (Windows 8.1, Linux Mint, Windows XP and others in VM)
 
 

Quote   Quote: Originally Posted by tgfyhre View Post
I ran the PC for hours today without a reboot, and then I went to make dinner and take a shower. When I returned, I moved the mouse cursor, and at that instant it rebooted. I really wish somebody would explain how that points to it being a power supply issue. I'm genuinely trying to understand.

I'm concerned about that BSOD message I got last night with Driver Verifier enabled:

"A Device Driver attempting to corrupt the system has been caught. The faulty driver currently on the kernal stack must be replaced with a working version."

I'd like to know how to identify which driver it's referring to and how to remove/replace it.
You just quoted it in the post above.
My System SpecsSystem Spec
1 Week Ago   #58

Windows 7 Pro. 64/SP-1
 
 

Post #54 could also be a clue.

Quote:
I'm currently trying to install the newest Logitech Setpoint as I uninstalled the older one earlier this evening and twice now it won't install - it gets stuck. Th first time the installer triggered a reboot.
Was you computer in sleep mode when you came back from dinner?
You could try another mouse and let Windows 7 load the driver.
My System SpecsSystem Spec
1 Week Ago   #59

Windows 7 32bit Home Premium
 
 

Quote   Quote: Originally Posted by essenbe View Post
Quote   Quote: Originally Posted by tgfyhre View Post
I ran the PC for hours today without a reboot, and then I went to make dinner and take a shower. When I returned, I moved the mouse cursor, and at that instant it rebooted. I really wish somebody would explain how that points to it being a power supply issue. I'm genuinely trying to understand.

I'm concerned about that BSOD message I got last night with Driver Verifier enabled:

"A Device Driver attempting to corrupt the system has been caught. The faulty driver currently on the kernal stack must be replaced with a working version."

I'd like to know how to identify which driver it's referring to and how to remove/replace it.
You just quoted it in the post above.
Oh, you mean the Paragon Uim_Vim.sys? I wasn't aware that was the driver that was triggering the message above.
My System SpecsSystem Spec
1 Week Ago   #60

Windows 7 32bit Home Premium
 
 

Quote   Quote: Originally Posted by Layback Bear View Post
Post #54 could also be a clue.

Quote:
I'm currently trying to install the newest Logitech Setpoint as I uninstalled the older one earlier this evening and twice now it won't install - it gets stuck. Th first time the installer triggered a reboot.
Was you computer in sleep mode when you came back from dinner?
You could try another mouse and let Windows 7 load the driver.
Nope, I don't use sleep mode. It was in idle on the desktop. Everything was fine until I moved the mouse and then it rebooted.

I let Windows automatically install the driver for the Logitech mouse. A little while later I installed the new version of Setpoint which allows me to customize the mouse buttons. I ran for a while with setpoint uninstalled but the reboots continued so setpoint isn't behind it (I didn't think it was since it's software, but I thought maybe the mouse driver could have been an issue).
My System SpecsSystem Spec
Reply

 random reboots without BSOD - sometimes several daily




Thread Tools



Similar help and support threads for2: random reboots without BSOD - sometimes several daily
Thread Forum
random reboots without BSOD - sometimes several daily General Discussion
Daily BSOD random times random Apps BSOD Help and Support
Random BSOD Daily BSOD Help and Support
Random BSOD's daily BSOD Help and Support
Random Daily BSOD's BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:29 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33