Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Multiple BSOD errors 0x0000010e 0x00000001 0x0000000a 0x0000003b

28 Apr 2014   #11
jaygreen

Windows 7 Home Premium 64bit
 
 

How many passes should I let each individual RAM stick get up to?


My System SpecsSystem Spec
.
28 Apr 2014   #12
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Quote   Quote: Originally Posted by jaygreen View Post
How many passes should I let each individual RAM stick get up to?
Minimum of 8 passes
My System SpecsSystem Spec
29 Apr 2014   #13
jaygreen

Windows 7 Home Premium 64bit
 
 

I have just finished running Memtest86 for testing each separate RAM sticks in each separate RAM slot. I ran 8 passes on each stick and I didn't get any errors. I'm now completely clueless to what I will have to do next to try and fix this damn BSOD problem.
My System SpecsSystem Spec
.

29 Apr 2014   #14
jaygreen

Windows 7 Home Premium 64bit
 
 

Any ideas to what I should do next? :S
My System SpecsSystem Spec
29 Apr 2014   #15
Thedoctor44

 

It could be a driver issue.

Enable Driver Verifier to see if a driver is at fault.

Please create a restore point before as it can make the system unbootable.
My System SpecsSystem Spec
01 May 2014   #16
jaygreen

Windows 7 Home Premium 64bit
 
 

So my PC was running flawlessly for 3 days straight till 10 minutes ago. I just received another BSOD!
My System SpecsSystem Spec
01 May 2014   #17
Thedoctor44

 

I think some other tests will need to be ran.

Run a Disk Check to scan for errors

Note   Note

Afterwards go into an Elevated Command Prompt (Run as administrator) and type in sfc /scannow
If it finds errors reboot and run the scan two more times


Run SeaTools to see if your HDD or SSD is failing

Post back the results.

Code:
WARNING: !chkimg output was truncated to 50 lines. Invoke !chkimg without '-lo [num_lines]' to view  entire output.
77 errors : !nt (fffff8000309e091-fffff8000309ee39)
My System SpecsSystem Spec
01 May 2014   #18
jaygreen

Windows 7 Home Premium 64bit
 
 

Quote   Quote: Originally Posted by Thedoctor44 View Post
I think some other tests will need to be ran.

Run a Disk Check to scan for errors

Note   Note

Afterwards go into an Elevated Command Prompt (Run as administrator) and type in sfc /scannow
If it finds errors reboot and run the scan two more times


Run SeaTools to see if your HDD or SSD is failing

Post back the results.

Code:
WARNING: !chkimg output was truncated to 50 lines. Invoke !chkimg without '-lo [num_lines]' to view  entire output.
77 errors : !nt (fffff8000309e091-fffff8000309ee39)
Thank you, will try this out. I just installed my new SSD a few days ago.
My System SpecsSystem Spec
01 May 2014   #19
jaygreen

Windows 7 Home Premium 64bit
 
 

Just finished running all the checks on my SSD and I didn't receive a single error in return. Hmmm... :S
My System SpecsSystem Spec
01 May 2014   #20
Thedoctor44

 

Was that with all tests?


Enable Driver Verifier to monitor the drivers.
Driver Verifier -Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

information   Information

Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.


warning   Warning

Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point Manually before enabling DV.


Tip   Tip
  • If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
  • If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.


Let us know the results, with the subsequent crash dumps, if any.
My System SpecsSystem Spec
Reply

 Multiple BSOD errors 0x0000010e 0x00000001 0x0000000a 0x0000003b




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD 0x0000000a 0x0000001e 0x00000050 0x0000003b
Dear experts, after just too many days of troubleshooting (please disregard the former thread) I decided to flash the BIOS, then re-format my SSD and re-install Windows 7 including all drivers the device manager asked for. Apart from BlueScreenView, SF Diagnostic Tool, 7zip and Dropbox, I...
BSOD Help and Support
multiple random BSOD's ERRORs 0x0000001e and 0X0000003b
Hi, Could really use some help in determining what's amiss. The crashes seem to randomly occur, at least nothing that I can pin point. I also tend to think this may be cause by both drivers and hardware as on at least two occasions the computer would not restart. When powered on, it failed...
BSOD Help and Support
BSOD, multiple errors 0x0000003b, 0x0000007e, 0x0000007f
Hi, I've recently started seeing BSODs with my gaming rig. It first happened while playing Star Wars: The Old Republic, but after that would occur during post or shortly after. I had not added any new hardware recently, or updated any drivers. Rig had been stable since I built it 18 months...
BSOD Help and Support
BSOD random 0x0000000a, 0x0000003b
Hi, I recently upgraded my pc and I have some probleme with the new one. I got the first BSOD on 18th of december: 0x0000000a After this, I updated the VGA driver (from AMD's page) and I did not have a problem for 3 days. Today I got this: 0x0000003b I have the latest drivers and updates...
BSOD Help and Support
BSOD generally at startup, errors: 0x0000000a and 0x0000003b.
Hi guys, I have been experiencing BSOD crashes for a few months now. I wasn't really sure what to do but now that they have become more frequent (normally 1-3 a day) I have come to you guys for help. I'm not completely computer illiterate and I've followed the appropriate error posting...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:15.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App