Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Multiple BSOD errors 0x0000010e 0x00000001 0x0000000a 0x0000003b

06 May 2014   #31
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Yes. Anytime you run memtest, you can stop any time you receive, errors, even 1 error is failure'.


My System SpecsSystem Spec
.
06 May 2014   #32
jaygreen

Windows 7 Home Premium 64bit
 
 

Quote   Quote: Originally Posted by essenbe View Post
Yes. Anytime you run memtest, you can stop any time you receive, errors, even 1 error is failure'.
I think I have filled everything out for you. If not, please let me know what you require and I'll simply jump to it.

thanks again. It is massively appreciated.
My System SpecsSystem Spec
06 May 2014   #33
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Great rig you have there I wanted an X79 but decided to wait for Haswell E, basically to see how quad channel ram does. Intel says there will be a performance increase too, but to Intel 5% is a big increase. I used to have the same case you have. It's a nice case. I'm going to wait to see the CPUz screenshots you send before anything else. I believe you have either ram problems or Motherboard problems. If you will hang with me, we'll find out, but it may take a lot of memtest to determine which. With all the ram slots on the x79, it makes for a lot more testing.
My System SpecsSystem Spec
.

06 May 2014   #34
jaygreen

Windows 7 Home Premium 64bit
 
 

Quote   Quote: Originally Posted by essenbe View Post
Great rig you have there I wanted an X79 but decided to wait for Haswell E, basically to see how quad channel ram does. Intel says there will be a performance increase too, but to Intel 5% is a big increase. I used to have the same case you have. It's a nice case. I'm going to wait to see the CPUz screenshots you send before anything else. I believe you have either ram problems or Motherboard problems. If you will hang with me, we'll find out, but it may take a lot of memtest to determine which. With all the ram slots on the x79, it makes for a lot more testing.
Eventually I may upgrade to Haswell, but I am happy with what I have got at the momemnt. it's Just these damn BSOD are killing me.. haha.

Here are the screenshots.
My System SpecsSystem Spec
06 May 2014   #35
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

All of you ram appears to be set to proper XMP values. Just make sure in BIOS you set the Dimm Voltage to 1.5V. This is the second time I have had to type this but here goes. I understand you ran all ram with all slots populated and got errors. I also understand you ran each stick in each slot with no errors. I assume you ran all those tests for 8 full Passes. Just so you will know, many people think we are asking them to run the same test 8 times. That is not the case. Each pass consists of 10 tests. Each pass tests a different part of the ram and each test tests a different thing. So, each test is different and it requires a minimum of 8 passes to fully test the ram. If you did not run the tests for 8 full passes please let me know. I suspect a motherboard Dimm Slot problem. They can be quite time consuming to figure out.

Let me give you an example of how difficult it can be. I had a board which acted much like yours. It would pass the ram sticks one at a time but would fail with the slots populated. After numerous hours of testing, I finally figured out if slot 2 was populated, then any other ram stick I put in any slot would fail. If slot 2 was empty, I could run the other 3 sticks for 10 passes and no failure. So, I'm sure you know where we are going with this.

here is a diagram of your ram slots.

Attachment 316879

I would like you to pick 2 sticks that you are sure are good. Populate Dimm Slot 1 and Dimm slot 2 and run memtest86 for 8 full passes or until it fails. Even 1 failure you can stop the test. If they both pass, take the stick from slot 2 and put it in slot 3 and run it, do the same for slot 4. Hopefully one slot will through an error, and we will know which one it is and you can call Gigabyte. Now, it's up to you. You could call them now and see what they say. Or you can run all these tests and have the ammunition you need to prove it is a motherboard problem.

My experience with Gigabyte was with a graphics card. The rep I spoke with seemed to not be interested at all in diagnosing the problem. he told me, it sounds like it could be a hardware problem so RMA it. I got the impression he didn't care, just RMA it. Now, I do have a lot of experience with several motherboard companies and RMAs. Just because you RMA it does not mean your problem will be solved by the board you receive back. You decide what you would rather do. If you RMA it, I can tell you how to test it the easy way when you get the return.
My System SpecsSystem Spec
06 May 2014   #36
jaygreen

Windows 7 Home Premium 64bit
 
 

Thank you for the response, Essenbe. Before I do this; Would it also be possible to completely remove the RAM and switch them with my girlfriends RAM. Surely if my PC doesn't BSOD with different RAM I can determine it's the RAM not the DIMM slot(s), right? :S
My System SpecsSystem Spec
06 May 2014   #37
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Jay. It depends on whether that RAM is compatible with your motherboard.

Use CPUz on yoyr girlfriends computer to gather the details so Steve can determine that.
My System SpecsSystem Spec
06 May 2014   #38
jaygreen

Windows 7 Home Premium 64bit
 
 

Here are some screenshots of my GF's RAM on CPU-Z
My System SpecsSystem Spec
06 May 2014   #39
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

jay, I don't see any reason it shouldn't work. When you change it, go into bios and see that it is recognized and the timings should be just about the same as yours, if needed adjust the frequency to 1333 from your present 1600. See if it works. You should be able to put them into any 2 slots, and it will work in dual channel mode rather than your current quad channel mode. If you have any problems, let us know.
My System SpecsSystem Spec
07 May 2014   #40
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

jaygreen, any news yet? Let me know how things go whenever you have time.
My System SpecsSystem Spec
Reply

 Multiple BSOD errors 0x0000010e 0x00000001 0x0000000a 0x0000003b




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD 0x0000000a 0x0000001e 0x00000050 0x0000003b
Dear experts, after just too many days of troubleshooting (please disregard the former thread) I decided to flash the BIOS, then re-format my SSD and re-install Windows 7 including all drivers the device manager asked for. Apart from BlueScreenView, SF Diagnostic Tool, 7zip and Dropbox, I...
BSOD Help and Support
multiple random BSOD's ERRORs 0x0000001e and 0X0000003b
Hi, Could really use some help in determining what's amiss. The crashes seem to randomly occur, at least nothing that I can pin point. I also tend to think this may be cause by both drivers and hardware as on at least two occasions the computer would not restart. When powered on, it failed...
BSOD Help and Support
BSOD, multiple errors 0x0000003b, 0x0000007e, 0x0000007f
Hi, I've recently started seeing BSODs with my gaming rig. It first happened while playing Star Wars: The Old Republic, but after that would occur during post or shortly after. I had not added any new hardware recently, or updated any drivers. Rig had been stable since I built it 18 months...
BSOD Help and Support
BSOD random 0x0000000a, 0x0000003b
Hi, I recently upgraded my pc and I have some probleme with the new one. I got the first BSOD on 18th of december: 0x0000000a After this, I updated the VGA driver (from AMD's page) and I did not have a problem for 3 days. Today I got this: 0x0000003b I have the latest drivers and updates...
BSOD Help and Support
BSOD generally at startup, errors: 0x0000000a and 0x0000003b.
Hi guys, I have been experiencing BSOD crashes for a few months now. I wasn't really sure what to do but now that they have become more frequent (normally 1-3 a day) I have come to you guys for help. I'm not completely computer illiterate and I've followed the appropriate error posting...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:54.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App